3629155 RUKO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 18

Technical content

6,0 - 12,0 6,0 - 27,0 101 082 P 101 084 P 92 - 95 4,0 - 12,0 6,0 - 40,0 101 050-5 101 097 96 - 99 4,0 - 12,0 6,5 - 32,5 101 050-9 E 101 534 E 96 - 99 4,0 - 12,0 6,0 - 40,0 101 050-5 T 101 097 T 96 - 99 4,0 - 12,0 6,0 - 40,0 101 050-5 F 101 097 F 96 - 99 6,0 - 18,0 101 068 F-1 100 4,0 - 12,0 4,0 - 30,0 101 050-9 H 101 052 H 101 4,0 - 12,0 4,0 - 30,0 101 050-9 TH 101 052 TH 101 4,0 - 12,0 4,0 - 30,0 101 061 101 063 101 3/16 - 1/2 7/8 - 1 1/8 101 701 101 709 102 3/16 - 1/2 7/8 - 1 1/8 101 701 E 101 709 E 102 3/16 - 1/2 7/8 - 1 1/8 101 701 T 101 709 T 102 3/16 - 1/2 7/8 - 1 1/8 101 701 F 101 709 F 102 4,0 - 12,0 4,0 - 30,0 101 350-9 101 352 103 5,3 - 30,5 6,5 - 32,5 101 090 101 093 104 5,3 - 30,5 6,5 - 32,5 101 090 T 101 093 T 104 5,3 - 30,5 6,5 - 32,5 101 090 F 101 093 F 104 12,0 - 20,0 30,0 - 40,0 101 361 101 363 104 HSS HSS 118° 118° HSS HSS HSS HSS 118° 118° 118° HSS 118° HSS HSS HSS HSS HSS 118° 118° 118° 118° 118° 118° HSS HSSE Co 5 HSSE Co 5 118° 118° HSS HSS HSS 118° 10,0 mm max 4,0 mm max 4,0 mm max 4,0 mm max 4,0 mm max 3,5 mm max 4,0 mm max 4,0 mm max 2,0 mm max 4,0 mm max 4,0 mm max 4,0 mm max 4,0 mm max 4,0 mm max 4,0 mm max 4,0 mm max 4,0 mm max 4,0 mm max 130° 118° C C C C C C C C C C C C C C C NEXT GENERATION NEXT GENERATION NEXT GENERATION NEXT GENERATION NEXT GENERATION NEXT GENERATION NEXT GENERATION NEXT GENERATION NEXT GENERATION NEXT GENERATION NEXT GENERATION NEXT GENERATION NEXT GENERATION NEXT GENERATION NEXT GENERATION Explanation of symbols from page 314 Range and

applications

overview: Material Surface Cutting edges Material thickness Point angle Point cut Shank Ø mm Article no. Page

< 900 N/mm² <1100 N/mm² <1300 N/mm² Main application Other application Steel (N/mm2) < 900 Steel (N/mm2) < 1100 Steel (N/mm2) < 1300 Stainless steel Aluminium Brass Bronze Plastics Cast iron Titanium alloyed

  • 5 in 1 tool
  • Up to 75% time savings
  • Ultimate flexibility Information and videos The new RUKO step drill Welcome to the world's first.
  • No center punching thanks to specially developed turbo tip.
  • No tool changes due to pre-drilling and different drill hole diameters, which would occur with for e.g. twist drills.
  • No problems in hard-to-reach places , for e.g. T-beams, where the use of big machines with core drills is problematic.
  • No problems with low holding forces of magnetic stand drilling machines for materials < 10 mm, since it can be drilled with a manual drilling machine.
  • No extra deburring necessary, the next step takes over this function. Unique in every step.

130° 130° 90° 90° 10,0 mm max 10,0 mm max Explanation of symbols from page 314 Steel (N/mm2) < 900 Steel (N/mm2) < 1100 Steel (N/mm2) < 1300 Rust-resistant steel Aluminium Brass Bronze Plastics Cast iron Titanium alloyed Packing unit: in plastic tubes of 1 ULTIMATECUT Step drills HSS RUnaTEC, spiral fluted with turbo tip ULTIMATECUT Step drill set HSS RUnaTEC, in plastic case The ULTIMATECUT step drill revolutionizes the work process and sets new standards in machi- ning time with time savings of up to 75%. The step drill from RUKO achieves this through its revolu- tionary cutting edge geometry by combining the most diverse applications and tools. This means less tools needed, no tool changes and ultimate flexibility. Size no. Ø1 - Ø2 mm Drilling range Ø mm mm Steps Ø3 mm S1 6,0 - 12,00 6,0 / 7,0 / 8,0 / 9,0 / 10,0 / 11,0 / 12,0 105,0 7 8,0 101 082 P 1 M2 6,0 - 20,00 6,0 / 8,0 / 10,0 / 12,0 / 14,0 / 16,0 / 18,0 / 20,0 120,0 8 10,0 101 083 P 1 L3 6,0 - 27,00 6,0 / 9,0 / 12,0 / 15,0 / 18,0 / 21,0 / 24,0 / 27,0 125,0 8 12,0 101 084 P 1 3-piece set of ULTIMATECUT step drills spiral fluted, sizes S1, M2, L3 101 087 PRO - Cooling - Adjust speed - Low speeds for hand drills - Follow table of application for ULTIMATECUT step drills - Pay attention to total length while drilling

Table of cutting speeds for ULTIMATECUT step drills Material Application Working step Hand drill Pillar drill Pillar drill / CNC machine manual feed automatic feed Structural steel (e.g. S235JR) Non-ferrous metals / Plexiglas / Plastics / Wood tapping (drilling through 1st step) up to 1000 rpm cooling recommended up to 1000 rpm cooling recommended approx. 750 rpm f = 0,1mm/rev cooling necessaryreaming (from 2nd step) 100 - 250 rpm cooling recommended 250- 350 rpm cooling recommended Stainless steel up to V2A tapping (drilling through 1st step) up to 600 rpm cooling necessary up to 600 rpm cooling necessary approx. 600 rpm f = 0,05mm/rev cooling necessaryreaming (from 2nd step) 100 - 200 rpm cooling necessary 200 - 300 rpm cooling necessary

compromises. The new RUKO step drill generation Upgraded and Improved Product. Improved specification replaces previous version.

  • Up to 4 times more holes
  • Smooth and quiet drilling
  • Significantly improved drilling result

Improved control on more difficult to cut materials, such as thin sheet and Plexiglas, whilst still providing outstanding performance on tougher materials such as stainless steel. Unique new cutting geometry design provides an easy, low force, seamless transition between the increasing hole diameters. Information and videos

C 118° 90° 4,0 mm max Explanation of symbols from page 314 Step drills HSS and HSSE-Co 5, spiral fluted with split point The CBN ground and spiral flutes guarantee quiet running and high cutting performance. Especially the chip flow is optimized, so even long, non-breaking chips will be removed easily. The optimized chip flow protects the cutting edges and reduces built-up edges and cold weld marks. The chamfer on the base of the cone makes withdrawal of the tool from the material simple when through hole drilling. Packing unit: in plastic tubes of 1 Size no. Ø1 - Ø2 mm mm Steps Ø3 mm 0/5 4,0 - 12,00 65,0 5 6,0 101 050-5 — 101 050-5 T 101 050-5 F 1 0/9 4,0 - 12,00 65,0 9 6,0 101 050-9 101 050-9 E 101 050-9 T 101 050-9 F 1 1 4,0 - 20,00 75,0 9 8,0 101 051 101 051 E 101 051 T 101 051 F 1 2 4,0 - 30,00 100,0 14 10,0 101 052 101 052 E 101 052 T 101 052 F 1 3 6,0 - 38,00 100,0 12 10,0 101 053 — 101 053 T 101 053 F 1 4 6,0 - 26,75 75,0 8 10,0 101 055 — 101 055 T 101 055 F 1 5 4,0 - 39,00 107,0 13 10,0 101 056 101 056 E 101 056 T 101 056 F 1 6 6,0 - 32,00 75,0 8 10,0 101 057 — 101 057 T 101 057 F 1 7 5,0 - 28,00 69,0 7 10,0 101 058 — 101 058 T 101 058 F 1 8 6,0 - 30,50 80,0 9 10,0 101 098 — 101 098 T 101 098 F 1 9 6,0 - 37,00 100,0 12 10,0 101 060 101 060 E 101 060 T 101 060 F 1 12 6,0 - 32,00 76,0 9 10,0 101 096 — 101 096 T 101 096 F 1 13 6,0 - 40,00 105,0 16 13,0 101 097 * — 101 097 T* 101 097 F* 1 18 6,5 - 32,50 91,0 12 10,0 — 101 534 E — — 1 * straight flute Steel (N/mm2) < 900 Steel (N/mm2) < 1100 Steel (N/mm2) < 1300 Rust-resistant steel Aluminium Brass Bronze Plastics Cast iron Titanium alloyed - Cooling - Adjust speed - Do not press - Step drill is pulled automatically into the plate Size no. Drilling range Ø mm

C 118° 90° HSS HSS HSSE Co 5 HSSE Co 5 HSS HSS HSS HSS 4,0 mm max Main application Other application Step drill sets HSS and HSSE-Co 5 in steel case Step drill sets HSS and HSSE-Co 5 in plastic case 3-piece set of step drills spiral fluted, sizes 0/9, 1, 2 101 026 101 026 E 101 026 T 101 026 F 3-piece set of step drills spiral fluted, sizes 0/9, 1, 2 101 026 RO 101 026 ERO 101 026 TRO 101 026 FRO

3,5 mm max HSS C 118° 90° Explanation of symbols from page 314 Packing unit: in plastic tubes of 1 Crash barrier step drill HSS-TiAlN spiral fluted with split point Specially designed for drilling crash barriers. For use on material strengths of up to 3,5 mm. Cooling recommended but not required (increased service life) Steps Ø: 6,0 / 8,0 / 10,0 / 12,0 / 14,0 / 16,0 / 18,0 mm Ø1 - Ø2 mm mm Steps Ø3 mm 6,0 - 18,00 68,0 7 10,0 101 068 F-1 1 Steel (N/mm2) < 900 Steel (N/mm2) < 1100 Steel (N/mm2) < 1300 Rust-resistant steel Aluminium Brass Bronze Plastics Cast iron Titanium alloyed

C 118° 90° C 118° 90° HSS HSS HSS 4,0 mm max 2,0 mm max Main application Other application Step drills bit HSS, spiral fluted with split point Packing unit: in plastic tubes of 1 Packing unit: in plastic tubes of 1 Step drills HSS, spiral fluted with split point, short design Step height 2,0 mm ideal to produce switchboards. Size no. Ø1 - Ø2 mm mm Steps Ø3 mm inch 0/9 4,0 - 12,00 72,0 9 6,35 x 27,0 1/4" 101 050-9 H 101 050-9 TH 1 1 4,0 - 20,00 81,0 9 6,35 x 27,0 1/4" 101 051 H 101 051 TH 1 2 4,0 - 30,00 105,0 14 6,35 x 27,0 1/4" 101 052 H 101 052 TH 1 Size no. Ø1 - Ø2 mm mm Steps Ø3 mm 0/9k 4,0 - 12,00 48,0 9 6,0 101 061 1 1k 4,0 - 20,00 58,0 9 8,0 101 062 1 2k 4,0 - 30,00 72,0 14 10,0 101 063 1 Steel (N/mm2) < 900 Steel (N/mm2) < 1100 Steel (N/mm2) < 1300 Rust-resistant steel Aluminium Brass Bronze Plastics Cast iron Titanium alloyed Steel (N/mm2) < 900 Steel (N/mm2) < 1100 Steel (N/mm2) < 1300 Rust-resistant steel Aluminium Brass Bronze Plastics Cast iron Titanium alloyed

C 118° 90° 4,0 mm max Explanation of symbols from page 314 Step drills HSS and HSSE-Co 5, fractional sizes, spiral fluted with split point Packing unit: in plastic tubes of 1 The CBN ground and spiral flutes guarantee quiet running and high cutting performance. Especially the chip flow is optimized, so even long, non-breaking chips will be removed easily. The optimized chip flow protects the cutting edges and reduces built-up edges and cold weld marks. The chamfer on the base of the cone makes withdrawal of the tool from the material simple when through hole drilling. Size no. Ø1 - Ø2 inch inch Steps Ø3 inch 1 3/16 - 1/2 3 1/8 6 1/4 101 701 101 701 E 101 701 T 101 701 F 1 2 1/8 - 1/2 3 1/8 13 1/4 101 702 101 702 E 101 702 T 101 702 F 1 3 1/4 - 3/4 2 3/4 9 3/8 101 703 101 703 E 101 703 T 101 703 F 1 4 3/16 - 7/8 3 1/4 12 3/8 101 704 101 704 E 101 704 T 101 704 F 1 5 5/16 - 1 3 1/4 9 3/8 101 705 101 705 E 101 705 T 101 705 F 1 6 7/8 - 1 3/8 3 1/4 5 3/8 101 706 101 706 E 101 706 T 101 706 F 1 7 3/8 - 1/2 1 7/8 2 1/4 101 707 101 707 E 101 707 T 101 707 F 1 8 7/8 2 19/32 1 3/8 101 708 101 708 E 101 708 T 101 708 F 1 9 7/8 - 1 1/8 3 7/64 2 3/8 101 709 101 709 E 101 709 T 101 709 F 1 Size no. Drilling range Ø mm 6 7/8 - 1 1/8 - 1 7/32 - 1 1/4 - 1 3/8 7 3/8 - 1/2 8 7/8 9 7/8 - 1 1/8 Steel (N/mm2) < 900 Steel (N/mm2) < 1100 Steel (N/mm2) < 1300 Rust-resistant steel Aluminium Brass Bronze Plastics Cast iron Titanium alloyed

118° 118° 90° 90° HSS HSS 4,0 mm max 4,0 mm max Main application Other application Packing unit: in plastic tubes of 1 Hexagonal magnetic holder Description Article no. Hexagonal magnetic holder 270 013 1 Packing unit: in plastic tubes of 1 Step drill sets HSS, with 3 cutting edges in steel case Step drills HSS, with 3 cutting edges The deep-ground flutes of step drills with 3 cutting edges guarantee absolutely chatter-free wor- king. The reduced load of the cutting edges allows a higher feed rate especially for soft materials like non-ferrous metals. The chamfer on the base of the cone makes withdrawal of the tool from the material simple when through hole drilling. Size no. Ø1 - Ø2 mm mm Steps Ø3 mm 0/9 4,0 - 12,00 65,0 9 6,0 101 350-9 1 1 4,0 - 20,00 75,0 9 8,0 101 351 1 2 4,0 - 30,00 100,0 14 10,0 101 352 1

Description

3-piece set of step drills with 3 cutting edges, sizes 0/9, 1, 2 101 326 Steel (N/mm2) < 900 Steel (N/mm2) < 1100 Steel (N/mm2) < 1300 Rust-resistant steel Aluminium Brass Bronze Plastics Cast iron Titanium alloyed

90° HSS HSS HSS HSS C 118° 90° 4,0 mm max 4,0 mm max Explanation of symbols from page 314 Size no. Ø1 - Ø2 mm mm Steps Ø3 mm 20 12,0 - 20,00 66,0 9 8,0 101 361 1 30 20,0 - 30,00 78,0 11 10,0 101 362 1 40 30,0 - 40,00 78,0 11 10,0 101 363 1 Step drills HSS without point Packing unit: in plastic tubes of 1 Packing unit: in plastic tubes of 1 Step drills HSS, spiral fluted with split point for metric cable connections Size no. Measurements Ø1 - Ø2 mm mm Steps Ø3 mm

14 Core holes 5,3 - 30,5 79,0 9 10,0 101 093 101 093 T 101 093 F 1

15 Through holes 6,5 - 32,5 79,0 9 10,0 101 092 101 092 T 101 092 F 1

16 Core holes 5,3 - 38,5 96,0 11 10,0 101 091 101 091 T 101 091 F 1

17 Through holes 6,5 - 40,5 96,0 11 10,0 101 090 101 090 T 101 090 F 1

14 DIN/EN 60423 5,3 / 7,0 / 9,0 / 10,5 / 14,5 / 18,5 / 23,5 / 27,0 / 30,5

15 DIN/EN 50262 6,5 / 8,5 / 10,5 / 12,5 / 16,5 / 20,5 / 25,5 / 29,0 / 32,5

17 DIN/EN 50262 6,5 / 8,5 / 10,5 / 12,5 / 16,5 / 20,5 / 25,5 / 29,0 / 32,5 / 36,5 / 40,5

Steel (N/mm2) < 900 Steel (N/mm2) < 1100 Steel (N/mm2) < 1300 Rust-resistant steel Aluminium Brass Bronze Plastics Cast iron Titanium alloyed Steel (N/mm2) < 900 Steel (N/mm2) < 1100 Steel (N/mm2) < 1300 Rust-resistant steel Aluminium Brass Bronze Plastics Cast iron Titanium alloyed

Material: High carbon struc. steel up to

700 N/mm²

struc. steel over

1000 N/mm²

250 N/mm²

11% Si Thermo- plastics Duro- plastics Sheet thickness mm: up to 4,0 up to 4,0 up to 4,0 up to 4,0 up to 4,0 up to 4,0 up to 4,0 up to 4,0 up to 4,0 up to 4,0 Vc = m/min 30 20 20 15 10 60 35 30 20 15 Cooling lubricant: Cutting spray Cutting spray Cutting spray Air Air Air Air Cutting spray Water Air 0/5 4,0 - 12,0 800 - 2400 500 - 1600 500 - 1600 400 - 1200 300 - 800 1600 - 4800 900 - 2800 800 - 2400 500 - 1600 400 - 1200 0/9 4,0 - 12,0 800 - 2400 500 - 1600 500 - 1600 400 - 1200 300 - 800 1600 - 4800 900 - 2800 800 - 2400 500 - 1600 400 - 1200 1 4,0 - 20,0 500 - 2400 300 - 1600 300 - 1600 200 - 1200 200 - 800 1000 - 4800 600 - 2800 500 - 2400 300 - 1600 200 - 1200 2 4,0 - 30,0 300 - 2400 200 - 1600 200 - 1600 200 - 1200 100 - 800 600 - 4800 400 - 2800 300 - 2400 200 - 1600 200 - 1200 3 6,0 - 38,0 300 - 1600 200 - 1100 200 - 1100 100 - 800 100 - 500 500 - 3200 300 - 1900 300 - 1600 200 - 1100 100 - 800 4 6,0 - 26,8 400 - 1600 200 - 1100 200 - 1100 200 - 800 100 - 500 700 - 3200 400 - 1900 400 - 1600 200 - 1100 200 - 800 5 4,0 - 32,0 300 - 2400 200 - 1600 200 - 1600 1200 - 100 100 - 800 600 - 4800 300 - 2800 300 - 2400 200 - 1600 100 - 1200 6 6,0 - 32,0 300 - 1600 200 - 1100 200 - 1100 800 - 100 100 - 500 600 - 3200 300 - 1900 300 - 1600 200 - 1100 100 - 800 7 5,0 - 28,0 300 - 1900 200 - 1300 200 - 1300 200 - 1000 100 - 600 700 - 3800 400 - 2200 300 - 1900 200 - 1300 200 - 1000 8 6,0 - 30,5 300 - 1600 200 - 1100 200 - 1100 200 - 800 100 - 500 600 - 3200 400 - 1900 300 - 1600 200 - 1100 200 - 800 9 6,0 - 37,0 300 - 1600 200 - 1100 200 - 1100 100 - 800 100 - 500 500 - 3200 300 - 1900 300 - 1600 200 - 1100 100 - 800 10 4,8 - 10,7 900 - 2000 600 - 1300 600 - 1300 400 - 1000 300 - 700 1800 - 4000 1000 - 2300 900 - 2000 600 - 1300 400 - 1000 11 6,0 - 25,0 400 - 1600 300 - 1100 300 - 1100 200 - 800 100 - 500 800 - 3200 400 - 1900 400 - 1600 300 - 1100 200 - 800 12 6,0 - 32,0 300 - 1600 200 - 1100 200 - 1100 100 - 800 100 - 500 600 - 3200 300 - 1900 300 - 1600 200 - 1100 100 - 800 13 6,0 - 40,0 200 - 1600 200 - 1100 200 - 1100 100 - 800 100 - 500 500 - 3200 300 - 1900 200 - 1600 200 - 1100 100 - 800 14 5,3 - 30,5 300 - 1800 200 - 1200 200 - 1200 200 - 900 100 - 600 600 - 3600 400 - 2100 300 - 1800 200 - 1200 200 - 900 15 6,5 - 32,5 300 - 1500 200 - 1000 200 - 1000 100 - 700 100 - 500 600 - 2900 300 - 700 300 - 1500 200 - 1000 100 - 700 16 5,3 - 38,5 200 - 1800 200 - 1200 200 - 1200 100 - 900 100 - 600 500 - 3600 300 - 2100 200 - 1800 200 - 1200 100 - 900 17 6,5 - 40,5 200 - 1500 200 - 1000 200 - 1000 100 - 700 100 - 500 500 - 2900 300 - 1700 200 - 1500 200 - 1000 100 - 700 18 6,5 - 32,5 300 - 1500 200 - 1000 200 - 1000 100 - 700 100 - 500 600 - 2900 300 - 1700 300 - 1500 200 - 1000 100 - 700 20 12,0 - 20,0 500 - 800 300 - 500 300 - 500 200 - 400 200 - 300 600 - 1600 600 - 900 500 - 800 300 - 500 200 - 400 30 20,0 - 30,0 300 - 500 200 - 300 200 - 300 200 - 200 100 - 200 600 - 1000 400 - 600 300 - 500 200 - 300 200 - 200 40 30,0 - 40,0 200 - 300 200 - 200 200 - 200 100 - 200 100 - 100 500 - 600 300 - 400 200 - 300 200 - 200 100 - 200 1 3/16 - 1/2 800 - 2000 500 - 1300 1300 - 500 400 - 1000 300 - 700 1500 - 4000 900 - 2300 800 - 2000 500 - 1300 400 - 1000 2 1/8 - 1/2 800 - 3000 500 - 2000 2000 - 500 400 - 1500 300 - 1000 1500 - 6000 900 - 3500 800 - 3000 500 - 2000 400 - 1500 3 1/4 - 3/4 500 - 1500 300 - 1000 1000 - 300 300 - 800 200 - 500 1000 - 3000 600 - 1800 500 - 1500 300 - 1000 300 - 800 4 3/16 - 7/8 400 - 2000 300 - 1300 1300 - 300 200 - 1000 100 - 700 900 - 4000 500 - 2300 400 - 2000 300 - 1300 200 - 1000 5 5/16 - 1 400 - 1200 300 - 800 800 - 300 200 - 600 100 - 400 800 - 2400 400 - 1400 400 - 1200 300 - 800 200 - 600 6 7/8 - 1 3/8 300 - 400 200 - 300 300 - 200 100 - 200 100 - 100 500 - 900 300 - 500 300 - 400 200 - 300 100 - 200 7 3/8 - 1/2 800 - 1000 500 - 700 700 - 500 400 - 500 300 - 300 1500 - 2000 900 - 1200 800 - 1000 500 - 700 400 - 500 8 7/8 400 300 300 200 100 900 500 400 300 200 9 7/8 - 1 1/8 300 - 400 200 - 300 300 - 200 200 - 200 100 - 100 700 - 900 400 - 500 300 - 400 200 - 300 200 - 200

Ø mm 0/5 for metric hole diameters Ø 4,0 Ø 6,0 Ø 8,0 Ø 10,0 Ø 12,0 0/9 for metric hole diameters Ø 4,0 Ø 5,0 Ø 6,0 Ø 7,0 Ø 8,0 Ø 9,0 Ø 10,0 Ø 11,0 Ø 12,0 1 for metric hole diameters Ø 4,0 Ø 6,0 Ø 8,0 Ø 10,0 Ø 12,0 Ø 14,0 Ø 16,0 Ø 18,0 Ø 20,0 2 for metric hole diameters Ø 4,0 Ø 6,0 Ø 8,0 Ø 10,0 Ø 12,0 Ø 14,0 Ø 16,0 Ø 18,0 Ø 20,0 Ø 22,0 Ø 24,0 Ø 26,0 Ø 28,0 Ø 30,0 3 for metric hole diameters Ø 6,0 Ø 9,0 Ø 13,0 Ø 16,0 Ø 19,0 Ø 21,0 Ø 23,0 Ø 26,0 Ø 29,0 Ø 32,0 Ø 35,0 Ø 38,0 4 for steel conduit threads (core holes) PG 7 / Ø 11,4 PG 9 / Ø 14,0 PG 11 / Ø 17,25 PG 13,5 / Ø 19,0 PG 16 / Ø 21,25 PG 21 / Ø 26,75 5 for metric hole diameters Ø 4,0 Ø 6,0 Ø 9,0 Ø 12,0 Ø 15,0 Ø 18,0 Ø 21,0 Ø 24,0 Ø 27,0 Ø 30,0 Ø 33,0 Ø 36,0 Ø 39,0 6 for pipe threads (external Ø, through holes) 7 for pipe threads (core holes) 8 for steel conduit threads (through holes) PG 7 / Ø 12,5 PG 9 / Ø 15,2 PG 11 / Ø 18,6 PG 13,5 / Ø 20,4 PG 16 / Ø 22,5 PG 21 / Ø 28,3 9 for steel conduit threads (through holes) PG 7 / Ø 12,5 PG 9 / Ø 15,2 PG 11 / Ø 18,6 PG 13,5 / Ø 20,4 PG 16 / Ø 22,5 PG 21 / Ø 28,3 PG 29 / Ø 37,0 10 for blind rivets M3 - M4 - M5 - M6 - M8 Ø 4,8 Ø 6,4 Ø 7,2 Ø 9,6 Ø 10,65 11 for metric hole diameters with high steps Ø 6,0 Ø 9,0 Ø 12,0 Ø 16,0 Ø 20,0 Ø 22,5 Ø 25,0 12 for metric hole diameters with high steps Ø 6,0 Ø 9,0 Ø 12,0 Ø 16,0 Ø 20,0 Ø 22,5 Ø 25,0 Ø 28,5 Ø 32,0 13 for metric hole diameters and large diameters Ø 6,0 Ø 39,0 Ø 11,0 Ø 40,0 Ø 17,0 Ø 23,0 Ø 29,0 Ø 30,0 Ø 31,0 Ø 32,0 Ø 33,0 Ø 34,0 Ø 35,0 Ø 36,0 Ø 37,0 Ø 38,0 14 for metric cable connections, core holes after DIN/EN 60423 M 6 Ø 5,3 M 8 Ø 7,0 M 10 Ø 9,0 M 12 Ø 10,5 M 16 Ø 14,5 M 20 Ø 18,5 M 25 Ø 23,5 M 32 Ø 30,5 15 for metric cable connections, through holes after DIN/EN 50262 M 6 Ø 6,5 M 8 Ø 8,5 M 10 Ø 10,5 M 12 Ø 12,5 M 16 Ø 16,5 M 20 Ø 20,5 M 25 Ø 25,5 M 32 Ø 32,5 16 for metric cable connections, core holes after DIN/EN 60423 M 6 Ø 5,3 M 8 Ø 7,0 M 10 Ø 9,0 M 12 Ø 10,5 M 16 Ø 14,5 M 20 Ø 18,5 M 25 Ø 23,5 M 32 Ø 30,5 M 40 Ø 38,5 17 for metric cable connections, through holes after DIN/EN 50262 M 6 Ø 6,5 M 8 Ø 8,5 M 10 Ø 10,5 M 12 Ø 12,5 M 16 Ø 16,5 M 20 Ø 20,5 M 25 Ø 25,5 M 32 Ø 32,5 M 40 Ø 40,5 18 for metric cable connections / for steel conduit threads, through holes M 6 Ø 6,5 M 8 Ø 8,5 M 10 Ø 10,5 M 12 / PG 7 Ø 12,7 PG 9 Ø 15,2 M 16 Ø 16,2 PG 11 Ø 18,6 M 20 / PG 13,5 Ø 20,4 PG 16 Ø 22,5 M 25 Ø 25,5 PG 21 Ø 28,3 M 32 Ø 32,5