35CP12-15-2-010-Y-G-00

35CP SENSATA | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 3

Technical content

Features

Applications

• Enhanced accuracy over wide operating range.
• Housing options are compatible with most media
• EMC protection compliance with EN 61326
• Broad operating temp. range (-30°C to +100°C )
• Exceptional shake and vibration tolerance
• Overvoltage and reverse polarity protection
• Small size and simple installation The 35CP series is ideal for general industrial applications where long-term reliability & accuracy is a must.This series provides proven reliability at a competitive price. Sensata Technologies has been a leading global supplier of pressure sensors & switches for over 50 years.
• Compressors & Water Pumps
• Hydraulics & Pneumatics
• Agriculture & Construction Equipment
• Transportation & Off Road Vehicles
• Engine Controls & Monitors
• Alternative Energy Management
• Process Control & Automation
• Medical Operating Pressure Range 0 ~ 5…… 50bar Accuracy ±1.0%F.S.(Linear, Hysteresis, Repeatability, Calibration) @25°C Total Error Band Voltage output: ±2.0% (-30°C ~100°C); Current Output: ±2.5% (-20°C ~ +85°C) Operating Temperature Range -30°C ~ +100°C (Typical) Storage Temperature -40°C ~ +85°C (Typical) Proof Pressure 1.5X ~ 3X (Max. Operating Pressure Range) Burst Pressure 2X ~ 5X (Max. Operating Pressure Range) Pressure Life Cycle 1~5M Full Span Cycles (Depends on Max. Operating Pressure Range) Vibration (IEC 60068-2-6) 10g (55~2000Hz) Drop (IEC 60068-2-32) 1.0m Output Signal 0.5 ~ 4.5VDC Ratiomatic (5VDC power supply), 4 ~ 20mA (8 ~ 30VDC power supply) Response Time <10 ms Over Voltage 20VDC ( Voltage Output), 40VDC (Current Output) Reverse Voltage -14VDC (Voltage Output), -40VDC (Current Output) Short Circuit Protection Yes EMC (EN 61326-1) Pass EMC (EN 61326-2-3) Pass ESD (IEC 61000-4-2) ±8 kV (Air); ±4 kV (Contact) Certification RoHS REACH CE UL

www.sensata.com Page 2 Copyright © 2024 Sensata Technologies Inc. Dimensions in mm [Inch] DIMENSIONS 35CP Series: Stainless Steel Port 35CP Series: Brass Port 35CP Series: Copper I-Tube 35CP Series: Copper L-Tube www.sensata.com Page 2 Copyright © 2024 Sensata Technologies Inc. Dimensions in mm [Inch] DIMENSIONS 35CP Series: Stainless Steel Port 35CP Series: Brass Port 产品型号、生产日期和产地编码: 示例：2012年7月03日 35CP82-01 P 12 CZ 03 中国常州(CHANGZHOU CHINA) 年份的最后两位(LAST TWO DIGITS OF YEAR) 月份编号 森萨塔产品编号 日(DAYS OF MONTH) 6.0±0.1 6.0±0.1 B 8.0±0.3 27.0±0.2 2.4±0.1 4.5±0.2 6.0±0.1 2 38.5±1.0 GND Vcc Vout SENSOR ECU (CONTROLLER) +5VDCVcc Vout GND A/D 10KΩ DETAIL B SCALE 4 : 1 35CP82-01: SENSATA P.N. PRODUCTION DATE & LOCATION CODE Blue Label 35CP82-01: SENSATA P.N PRODUCTION DATE $ LOCATION CODE 4.电气连接图 (ELECTRIC INSTALLATION) Vout/Vcc*100= 4*P+10.0 Vout: 输出电压 (OUTPUT VOLTAGE) [VDC] Vcc : 供电电压 (SUPPLY VOLTAGE) [VDC] P : 输入压力 (INPUT PRESSURE) [barG] 3.输出特性 (OUTPUT CHARACTERISTISCS) 1.精度特性 (ACCURACY) 1.1 综合精度(INITIAL ACCURACY) ±1.5%FS 1.2 全误差带(TOTAL ERROR BAND) ±2.5%FS 注：综合精度指在101.3KPaA，5V供电电压时，工作温度范围内的精度偏差。全误 差带是全寿命、全温度和全压力范围内的产品精度。 NOTE: SYNTHESIS ACCURACY IS THE ACCURACY DEVIATION IN WHOLE OPERATING TEMPERATURE RANGE WHEN PRESSURE IS 101.3KPaA AND THE POWER SUPPLY IS 5V. TOTAL ERROR BAND IS ACCURAY IN WHOLE TEMPERATURE AND PRESSRE RANGE DURING SERVICE LIFE. 2.性能规格 (SPECIFICATIONS) 2.1 供电电压(SUPPLY VOLTAGE) 2.2 供电电流(SUPPLY CURRENT) 2.3 压力介质(PRESSURE MEDIUM) 2.4 压力范围(PRESSURE RANGE) 2.5 耐压压力(PROOF PRESSURE) 2.6 破坏压力(BURST PRESSURE) 2.7 工作温度（Working Tempertature） 2.8 输出电压(OUTPUT VOLTAGE) 2.9 绝缘阻抗(ISULATION RESISTANCE) 2.10 电气强度(ELECTRIC STRENGTH) 2.11 过电压(OVER VOLTAGE) 2.12 反向电压(REVERSE VOLTAGE) IP LEVEL) 5.0±0.5 VDC 10mA MAX R410a, R134a, R404a, R407c, R507 0~20barG 40barG 60barG -30 ~ +120 °C 0.5 ~ 4.5V 100Mohm(500VDC) 1800V AC, 1S, <0.75mA(LEAK CURRENT) 20V -14V IP66 35CP82-01 P12CZ03 该接插件与矢崎RK03FB匹配 THE CONNECTOR MATING WITH YAZAKI RK03FB ECO NUMBER DATE APPROVEDDESCRIPTIONREVZONE B 32 4 5 6 7 8 9 10 1211 12111098765431 2 A H G F E D C B H G F E D C B A ECO-265475 28-NOV-2018 CX HU

18 CHUANGXIN ROAD

NEITHER THIS PRINT NOR THE INFORMATION CONTAINED HEREON IS TO BE USED AGAINST THE INTERESTS OF SENSATA TECHNOLOGIES OR AGAINST THE INTERESTS OF ANY OF ITS AFFILIATED COMPANIES OR WHOLLY OWNED SUBSIDIARIES. SCALEDATE DATE DATE DATE ENGINEER BA2 METHOD ALL RIGHT RESERVED SHEET SIZE NUMBERAPPROVED APPROVED TITLE DRAWN

1 OF 1

1:1 THIRD ANGLE PROJECTION INTERPRET DIMENSIONING AND TOLERANCING PER ASME Y14.5-2009. UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. 17-AUG-2017 17-AUG-2017 CHANGE SHORT LABEL TO LONG LABEL; TW 产品型号、生产日期和产地编码: 示例： 2012年7月03日 35CP82-54 P 12 CZ 03 中国常州(CHANGZHOU CHINA) 年份的最后两位(LAST TWO DIGITS OF YEAR) 月份编号(MONTH CODE) 森萨塔产品编号(SENSATA PN) 日(DAYS OF MONTH) 注意(CAUTION) SEE NOTE 4 SEE NOTE 1 激光焊 LASER WELDING 压力管(SS304) PRESSURE PORT 对配件 SEE NOTE 2. 钎焊 BRAZING 套管(蓝色) SLEEVE(BLUE) 35CP82-54 P12CZ03 识别标记 RECOGNITION DOT 69.5±1.5 36 6 15.50 6.35±0.1 35.0±1.5 4.5±0.2 12.2 6.0±0.1 90°±5° R10.0 8.0±0.5 26.85±0.10 90°±5° GND Vcc Vout ENVELOPE 2.1 供电电压(SUPPLY VOLTAGE) 2.2 供电电流(SUPPLY CURRENT) 2.3 压力介质(PRESSURE MEDIUM) 2.4 压力范围(PRESSURE RANGE) 2.5 耐压压力(PROOF PRESSURE) 2.6 破坏压力(BURST PRESSURE) 2.7 工作温度(OPERATING TEMP. RANGE) 2.8 介质温度(MEDIUM TEMP. RANGE) 2.9 输出电压(OUTPUT VOLTAGE) 2.10 绝缘阻抗(INSULATION RESISTANCE) 2.11 电气强度(DIELECTRIC STRENGTH) 2.12 耐过电压(OVER VOLTAGE) 2.13 防护等级(PROTECTION CLASS) 2.14 外部负载(EXTERNAL LOADING)

2.15 RoHS & REACH COMPLIANCE

3.输出特性 (OUTPUT CHARACTERISTISCS) 1.精度特性 (ACCURACY) 1.1 基本精度(BASIC ACCURACY) ±1.0%FS (25 °C) 1.2 全误差带(TOTAL ERROR BAND) ±2.0%FS (-30～100 °C) 注： 基本精度指包括非线性、迟滞、短期重复性在内的室温精度偏差; 全误差带是全工作温度和全压力量程内的产品精度。 REMARK: BASIC ACCURACY INCLUDES NON-LINEAR, HYSTERISIS & SHORT TERM REPEATABLITY ACCURACY AT ROOM TEMP. TOTAL ERROR BAND IS ACCURAY IN WHOLE OPERATING TEMP & PRESSURE RANGE. 2. 对配件为PACKARD 12065287 或等同件. DESIGNED FOR MATING WITH PACKARD CONNECTOR 12065287 OR EQUIVALENTfl 3. 外观检验按照(APPEARANCE INSPECTION ACCORDING TO): "IS APT GENERAL STANDARD OF APPEARANCE(2)". 在高温高湿等存储条件下，铜管表面容易氧化变色，此为正常现象，不影响本产品功能。 UNDER HIGH TEMPERATURE OR HIGH HUMIDITY STORAGE CONDITIONS, THE SURFACE OF COPPER TUBE IS EASILY OXIDIZED AND DISCOLORED, WHICH IS A NORMAL PHENOMENON AND DOES NOT AFFECT THE FUNCTION OF THE PRODUCT. 4. 注意: 钎焊铜管时，压力管底部的温度需要小于120℃.. CAUTION: WHEN BRAZING THE COPPER TUBE, THE TEMPERATURE AT PORT BOTTOM SHOULD BE LOWER THAN 120.. NOTE: 1. 产品编码PRODUCT CODE : 35CP82-54  SENSATA PRODUCT NUMBER P12CZ03  PRODUCTION DATE & LOCATION CODE 2.性能规格 (SPECIFICATIONS) 5ＶＤＣ±0.25VDC <10mA R410A 0BarG～15BarG (SEALED GAGE)

30 BarG

75 BarG

-30°C~100 °C -40°C~120 °C(SHORT TERM @101°C~120°C) 0.5VDC~4.5VDC(Vcc: 5VDC) >100 MΩ(500 VDC) 1800 VAC,1SEC (LEAKAGE≤0.75mA)

40 VDC

≥10 ｋΩ YES (符合) Vout / Vcc x 100 = 5.3333 x P + 10 Vout : OUTPUT VOLTAGE Vcc : SUPPLY VOLTAGE P : INPUT PRESSURE IN BarG NOTE: 0 BarG = 101.325 KPaA MONTH 01 02 03 04 05 06 07 08 09 10 11 12 CODE B D F H K M P R T V X Z ECO NUMBER DATE APPROVED INITIAL RELEASE FOR PRODUCTION; JL DESCRIPTIONREVZONE A 32 4 5 6 7 8 9 10 1211 12111098765431 2 A H G F E D C B H G F E D C B A 25-AUG-2023 S. ZHAI J. LIU S. ZHAI 22-AUG-2023 E. JIANG LINEAR ANGULAR TOLERANCES NEITHER THIS PRINT NOR THE INFORMATION CONTAINED HEREON IS TO BE USED AGAINST THE INTERESTS OF SENSATA TECHNOLOGIES OR AGAINST THE INTERESTS OF ANY OF ITS AFFILIATED COMPANIES OR WHOLLY OWNED SUBSIDIARIES. SCALEDATE DATE DATE DATE ENGINEER AA2 METHOD ALL RIGHT RESERVED SHEET SIZE NUMBERAPPROVED APPROVED TITLE DRAWN 3:1 THIRD ANGLE PROJECTION INTERPRET DIMENSIONING AND TOLERANCING PER ASME Y14.5-2009. UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.22-AUG-2023 22-AUG-2023 35CP82-54-ENV ENVELOPE DRAWING 0 UP TO 6: 0.1 OVER 6 UP TO 30: 0.2 3 OVER 30 UP TO 120: 0.3 OVER 120 UP TO -: 0.5 ECO-568174 产品型号、生产日期和产地编码: 示例： 2012年7月03日 35CP82-54 P 12 CZ 03 中国常州(CHANGZHOU CHINA) 年份的最后两位(LAST TWO DIGITS OF YEAR) 月份编号(MONTH CODE) 森萨塔产品编号(SENSATA PN) 日(DAYS OF MONTH) 注意(CAUTION) SEE NOTE 4 SEE NOTE 1 激光焊 LASER WELDING 压力管(SS304) PRESSURE PORT 对配件 SEE NOTE 2. 钎焊 BRAZING 套管(蓝色) SLEEVE(BLUE) 35CP82-54 P12CZ03 识别标记 RECOGNITION DOT 69.5±1.5 36 6 15.50 6.35±0.1 35.0±1.5 4.5±0.2 12.2 6.0±0.1 90°±5° R10.0 8.0±0.5 26.85±0.10 90°±5° GND Vcc Vout ENVELOPE 2.1 供电电压(SUPPLY VOLTAGE) 2.2 供电电流(SUPPLY CURRENT) 2.3 压力介质(PRESSURE MEDIUM) 2.4 压力范围(PRESSURE RANGE) 2.5 耐压压力(PROOF PRESSURE) 2.6 破坏压力(BURST PRESSURE) 2.7 工作温度(OPERATING TEMP. RANGE) 2.8 介质温度(MEDIUM TEMP. RANGE) 2.9 输出电压(OUTPUT VOLTAGE) 2.10 绝缘阻抗(INSULATION RESISTANCE) 2.11 电气强度(DIELECTRIC STRENGTH) 2.12 耐过电压(OVER VOLTAGE) 2.13 防护等级(PROTECTION CLASS) 2.14 外部负载(EXTERNAL LOADING) 3.输出特性 (OUTPUT CHARACTERISTISCS) 1.精度特性 (ACCURACY) 1.1 基本精度(BASIC ACCURACY) ±1.0%FS (25 °C) 1.2 全误差带(TOTAL ERROR BAND) ±2.0%FS (-30～100 °C) 注： 基本精度指包括非线性、迟滞、短期重复性在内的室温精度偏差; 全误差带是全工作温度和全压力量程内的产品精度。 REMARK: BASIC ACCURACY INCLUDES NON-LINEAR, HYSTERISIS & SHORT TERM REPEATABLITY ACCURACY AT ROOM TEMP. TOTAL ERROR BAND IS ACCURAY IN WHOLE OPERATING TEMP & PRESSURE RANGE. 2. 对配件为PACKARD 12065287 或等同件. DESIGNED FOR MATING WITH PACKARD CONNECTOR 12065287 OR EQUIVALENTfl 3. 外观检验按照(APPEARANCE INSPECTION ACCORDING TO): "IS APT GENERAL STANDARD OF APPEARANCE(2)". 在高温高湿等存储条件下，铜管表面容易氧化变色，此为正常现象，不影响本产品功能。 UNDER HIGH TEMPERATURE OR HIGH HUMIDITY STORAGE CONDITIONS, THE SURFACE OF COPPER TUBE IS EASILY OXIDIZED AND DISCOLORED, WHICH IS A NORMAL PHENOMENON AND DOES NOT AFFECT THE FUNCTION OF THE PRODUCT. 4. 注意: 钎焊铜管时，压力管底部的温度需要小于120℃.. CAUTION: WHEN BRAZING THE COPPER TUBE, THE TEMPERATURE AT PORT BOTTOM SHOULD BE LOWER THAN 120.. NOTE: 1. 产品编码PRODUCT CODE : 35CP82-54  SENSATA PRODUCT NUMBER P12CZ03  PRODUCTION DATE & LOCATION CODE 2.性能规格 (SPECIFICATIONS) 5ＶＤＣ±0.25VDC <10mA R410A 0BarG～15BarG (SEALED GAGE) -30°C~100 °C -40°C~120 °C(SHORT TERM @101°C~120°C) 0.5VDC~4.5VDC(Vcc: 5VDC) >100 MΩ(500 VDC) 1800 VAC,1SEC (LEAKAGE≤0.75mA) ≥10 ｋΩ YES (符合) Vout / Vcc x 100 = 5.3333 x P + 10 Vout : OUTPUT VOLTAGE Vcc : SUPPLY VOLTAGE P : INPUT PRESSURE IN BarG NOTE: 0 BarG = 101.325 KPaA MONTH 01 02 03 04 05 06 07 08 09 10 11 12 CODE B D F H K M P R T V X Z ECO NUMBER DATE APPROVED INITIAL RELEASE FOR PRODUCTION; JL DESCRIPTIONREVZONE A 32 4 5 6 7 8 9 10 1211 12111098765431 2 A H G F E D C B H G F E D C B A 25-AUG-2023 S. ZHAI J. LIU S. ZHAI 22-AUG-2023 E. JIANG LINEAR ANGULAR TOLERANCES NEITHER THIS PRINT NOR THE INFORMATION CONTAINED HEREON IS TO BE USED AGAINST THE INTERESTS OF SENSATA TECHNOLOGIES OR AGAINST THE INTERESTS OF ANY OF ITS AFFILIATED COMPANIES OR WHOLLY OWNED SUBSIDIARIES. SCALEDATE DATE DATE DATE ENGINEER AA2 METHOD ALL RIGHT RESERVED SHEET SIZE NUMBERAPPROVED APPROVED TITLE DRAWN 3:1 THIRD ANGLE PROJECTION INTERPRET DIMENSIONING AND TOLERANCING PER ASME Y14.5-2009. UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.22-AUG-2023 22-AUG-2023 35CP82-54-ENV ENVELOPE DRAWING 0 UP TO 6: 0.1 OVER 6 UP TO 30: 0.2 3 OVER 30 UP TO 120: 0.3 OVER 120 UP TO -: 0.5 ECO-568174

+1 (800) 350 2727 sensors@sensata.com switches@sensata.com Europe, Middle East & Africa +359 (2) 809 1826 pressure-info.eu@sensata.com Asia Pacific sales.isasia@list.sensata.com China +86 (21) 2306 1500 Japan +81 (45) 277 7117 Korea +82 (31) 601 2004 India +91 (80) 67920890 Rest of Asia +886 (2) 27602006 ext 2808 Page 3 CONTACT US Sensata Technologies, Inc. (“Sensata”) data sheets are solely intended to assist designers (“Buyers”) who are developing systems that incorporate Sensata products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible for using its independent analysis, evaluation and judgment in designing Buyer’s systems and products. Sensata data sheets have been created using standard laboratory conditions and engineering practices. Sensata has not conducted any testing other than that specifically described in the published documentation for a particular data sheet. Sensata may make corrections, enhancements, improvements and other changes to its data sheets or components without notice. Buyers are authorized to use Sensata data sheets with the Sensata component(s) identified in each particular data sheet. HOWEVER, NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATA SHEETS ARE PROVIDED “AS IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATA SHEETS OR USE OF THE DATA SHEETS, EXPRESS, IMPLIED OR STATUTORY , INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY , FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO SENSATA DATA SHEETS OR USE THEREOF. All products are sold subject to Sensata’s terms and conditions of sale supplied at www.sensata.com SENSATA ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY AND SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS, AND ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS-RELATED INFORMATION OR SUPPORT THAT MAY BE PROVIDED BY SENSATA. Mailing Address: Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA. www.sensata.com Copyright © 2024 Sensata Technologies, Inc.Rev:06/11/24 ORDERING OPTIONS Example : 35CP11-162010YS00M1HC Family 35CP: Series Number Accuracy 1: ±1%FS 2: ± 0.5%FS Electrical Isolation 1: Normal 2: Isolated Pressure Fitting 16: G 1/4 Male 15: 7/16-20UNF-2B Female Electrical Connector 2: Packard Metri-Pack Operating Pressure Range 0-1Obar(010),0-50bar(050) Output / Input Y: 4-20mA / 10-32Vdc X: 0.5-4.5Vdc / 5.0 ± 0.5Vdc Reference Pressure G: Guage S: Sealed Guage Harness Length 00: 0.0 Meter 01: 0.1 Meter Operating Temperature Range M: -20-85°C H: -20-120°C Port Material 1: SS304 Sealing Material H: HNBR E: EPDM Media Compatibility C: Water, Humidity Air 35CP 1 1 - 16 - 2 - 010 - Y - S - 00 - M - 1 - H - C