359A EMCORE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Features

„ Delays Up to 1000 microseconds „ 200 KM „ Small Size „ Flat RF Amplitude Response and Phase 359A Series 1310 & 1550 nm Standard and Ultra Fiber Optic Delay Line Modules Product Size Max Delay Max. Length 359A - Standard* 1 RU 110 µs 24 km 359A - Ultra* 1 RU 200 µs 40 km 359A - Standard* 3 RU 350 µs 72 km 359A - Ultra* 3 RU 580 µs 118 km 359A - Standard* 5 RU 600 µs 120 km 359A - Ultra* 5 RU 1000 µs 200 km Delay Length Specifications *Standard uses 250 micron buffer, Ultra uses 200 micron buffer Optical Specifications Parameter Typical Units Attenuation @ 1550 nm < 0.21 dB/km Attenuation @ 1310 nm < 0.34 dB/km IOR @ 1550 nm 1.468 IOR @ 1310 nm 1.467 Zero Dispersion Wavelength 1312 ± 10 Zero Dispersion Slope < 0.090 ps/nm^2 km Typical Dispersion Slope 0.087 ps/nm^2 km Typical Total Dispersion @ 1550 nm 16.2 ps/nm-km

MICROWAVEDATASHEET | NOVEMBER 2014 © 2014 EMCORE Corporation | REV 2014.11 satcom-sales@emcore.com www.emcore.com Information contained herein is deemed to be reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specifications at any time without notice. +1 626-293-3400 Mechanical Specifications Description Value Units Body Dimensions 1 RU 3 RU 5 RU in (mm) Faceplate Dimensions 1 RU 3 RU 5 RU in (mm) Storage Temperature -60 to +85 °C Operating Temperature -40 to +85 °C

Ordering Information

“A” Rack Unit Size “WW” Delay in µS “XXXXXX” Connector Type “YY” Optional Features* “ZZ” A = Standard or Ultra Delay 001000 = 10 µs Delay 010000 = 100 µs Delay 100000 = 1000 µs Delay SA = SC/APC FA = FC/APC LA = LC/APC EA = E2000/APC P = Pigtail Leads B = Bulkhead PM = Midspan Breakout - Pigtail BM = Midspan Breakout - Bulkhead „ When ordering replace “WW” with one of the Rack Unit Size Options „ When ordering replace “XXXXXX” with one of the Delay Options „ When ordering replace “YY” with one of the Connector Type Options „ When ordering replace “Z”Z with one of the Optional Features Midspan Breakouts - For some applications, particularly coils greater than 50 km in length for 1550 nm applications, higher signal levels and more configurability is required. For these cases, midspan breakouts can be placed at every 50 km (about every 245 µs) interval of the 359A Series Delay and Dispersion Compensation Modules to allow the insertion of optical amplification (EDFA). Pigtail Leads - If preferred, the standard bulkhead connector input and output of the 359A Series Delay and Dispersion Compensation Modules can be replaced with a one meter long pigtail with a male connector on the end. 359A Series 1310 & 1550 nm Standard and Ultra Fiber Optic Delay Line Modules