3590 BOURNS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
Features
■ Bushing mount ■ Optional AR pin feature ■ Plastic or metal shaft and bushings ■ Wirewound ■ Solder lugs or PC pins ■ Sealable (Full body seal) ■ Designed for use in HMI applications
Electrical Characteristics
Dielectric Withstanding Voltage (MIL-STD-202, Method 301) Power Rating (Voltage Limited By Power Dissipation or 450 VAC, Whichever is Less) Environmental Characteristics Temperature Coefficient Over Storage Temperature Range Moisture Resistance (MIL-STD-202, Method 103, Condition B) IP Rating Mechanical Characteristics 1.1 N-cm (1.5 oz.-in.) maximum (sealed) 170-200 N-cm (15-18 in.-lb.) (metal) Soldering Condition rosin cored wire; 370 °C (700 °F) max. for 3 seconds for 5 seconds tolerance, linearity tolerance, wiring diagram, and date code. Recommended Part Numbers Resistance Resolution (Printed Circuit) (Solder Lug) (Solder Lug) (Ω)( % ) 3590P-2-102L 3590S-2-102L 3590S-1-102L 1,000 .029 3590P-2-202L 3590S-2-202L 3590S-1-202L 2,000 .023 3590P-2-502L 3590S-2-502L 3590S-1-502L 5,000 .025 3590P-2-103L 3590S-2-103L 3590S-1-103L 10,000 .020 3590P-2-203L 3590S-2-203L 3590S-1-203L 20,000 .019 3590P-2-503L 3590S-2-503L 3590S-1-503L 50,000 .013 3590P-2-104L 3590S-2-104L 3590S-1-104L 100,000 .009 1 3 BUSHING DIAMETER (SEE PART NUMBERS) SHAFT DIAMETER (SEE PART NUMBERS) CCW CW CW STANDOFFS 12.70 (.500) MOUNTING SURFACE 15.54 (.612) RECOMMENDED PC BOARD MOUNTING HOLE LOCATIONS FMS 5.08 ± .38 (.200 ± .015) 6.99 ± .38 (.275 ± .015) 5.08 ± .38 (.200 ± .015) 10.31 + .00/- .13 (.406+.000/-.005) .25 (.010) 1.19 (.047) .81 ± .25 (.032 ± .010) (METAL VERSIONS) 7.92 (.312) .81 (.032) 20.62 ± .81 (.812 ± .032) 18.6 ± .4 (.732 ± .015) 12.2 (.48) 11.81 (.465) DIA.22 ± .38 (.875 ±.015) DIA. HOLE DIAMETER 2.08 (.082) 5.08 (.200) 5.08 (.200) 6.99 (.275) TOLERANCES: EXCEPT WHERE NOTED FRACTIONS: ±1/64 MMDIMENSIONS: (IN.) (PLASTIC VERSIONS) R SHAFT & BUSHING CONFIGURATIONS (Bushing - DxL, Shaft - D) (-1) Plastic Bushing (3/8 ” x 5/16 ”) and Shaft (.2480 + .001, - .002) (-2) Metal Bushing (3/8 x 5/16 ) and Shaft (.2497 + .0000, - .0009) (-3) Sealed, Plastic Bushing (3/8 ” x 5/16 ”) and Shaft (.2480 + .001, - .002) (-4) Sealed, Metal Bushing (3/8 ” x 5/16 ”) and Shaft (.2497 + .0000, - .0009) (-5) Metric, Plastic Bushing (9 mm x 7.94 mm) and Shaft (6 mm + 0, - .076 mm) (-6) Metric, Metal Bushing (9 mm x 7.94 mm) and Shaft (6 mm + 0, - .023 mm) (-7) Metric, Sealed, Plastic Bushing (9 mm x 7.94 mm) and Shaft (6 mm + 0, - .076 mm) (-8) Metric, Sealed, Metal Bushing (9 mm x 7.94 mm) and Shaft (6 mm + 0, - .023 mm) BOLDFACE LISTINGS ARE IN STOCK AND READILY AVAILABLE THROUGH DISTRIBUTION. FOR OTHER OPTIONS CONSULT FACTORY. TERMINALS: L = RoHS COMPLIANT BLANK = STANDARD REV. 06/06 NOTE: For Anti-rotation pin add 91 after configuration dash number. Example: -2 becomes -291 to add AR pin. *RoHS COMPLIANTVERSIONS AVAILABLE