3590S-6-102L BOURNS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Features

■ Bushing mount ■ Optional AR pin feature ■ Plastic or metal shaft and bushings ■ Wirewound ■ Solder lugs or PC pins ■ Sealable (Full body seal) ■ Designed for use in HMI applications ■ RoHS compliant* 3590 - Precision Potentiometer Specifi cations are subject to change without notice. Customers should verify actual device performance in their specifi c applications. *RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Electrical Characteristics1 Dielectric Withstanding Voltage (MIL-STD-202, Method 301) Power Rating (Voltage Limited By Power Dissipation or 450 VAC, Whichever is Less) Environmental Characteristics1 Moisture Resistance (MIL-STD-202, Method 103, Condition B) IP Rating Mechanical Characteristics1 1.1 N-cm (1.5 oz.-in.) maximum (sealed) 90-113 N-cm (8-10 in.-lb.) (metal) Soldering Condition NOTE: For Anti-rotation pin add 91 after confi guration dash number. Example: -2 becomes -291 to add AR pin. 1At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted. 2Consult manufacturer for complete specifi cation details for resistances below 1k ohms. BOLDFACE LISTINGS ARE IN STOCK AND READILY AVAILABLE THROUGH DISTRIBUTION. FOR OTHER OPTIONS CONSULT FACTORY. ROHS IDENTIFIER: L = COMPLIANT Recommended Part Numbers (Printed Circuit) (Solder Lug) (Solder Lug) Resistance ( Ω) Resolution (%) 3590P-2-102L 3590S-2-102L 3590S-1-102L 1,000 .029 3590P-2-202L 3590S-2-202L 3590S-1-202L 2,000 .023 3590P-2-502L 3590S-2-502L 3590S-1-502L 5,000 .025 3590P-2-103L 3590S-2-103L 3590S-1-103L 10,000 .020 3590P-2-203L 3590S-2-203L 3590S-1-203L 20,000 .019 3590P-2-503L 3590S-2-503L 3590S-1-503L 50,000 .013 3590P-2-104L 3590S-2-104L 3590S-1-104L 100,000 .009 *RoHS COMPLIANT

12.19 ± 0.51 (.480 ± .020) SOLDER LUG TERMINAL PC PIN TERMINAL THICKNESS1.63 ± 0.38 (.064 ± .015) .305 ± .003 (.012 ± .0001) 0.86 (.034) 3 PLCS. 3.30 ± 0.38 (.130 ± .015) 2.54 (.100) 3 PLCS. 12.19 ± 0.51 (.480 ± .020) 3590 - Precision Potentiometer Panel Thickness Dimensions (For Bushing Mount Only) PANEL POT LOCKWASHER HEX NUT 2.46 - 3.81 (.097 - .150) 1.60 +.08/-.03 (.063 +.003/-.001) 10.44 ± .07 (.411 ± .003) DIA. DIA. ADDITIONAL HOLE FOR ANTI-ROTATION PIN Anti-rotation pin hole is shown at six o'clock position for reference only. The actual location is determined by the customer's application. Refer to the front view of the potentiometer to see the location of the optional A/R pin. Panel thickness and hole diameters are recommended for best fit. However, customers may adjust the dimensions to suit their specific application. 7.42 (.292)R Product Dimensions Specifi cations are subject to change without notice. Customers should verify actual device performance in their specifi c applications. REV. 06/12 1 3 BUSHING DIAMETER (SEE PART NUMBERS) SHAFT DIAMETER (SEE PART NUMBERS) 12.70 (.500) MOUNTING SURFACE 15.54 (.612) 5.08 ± .38 (.200 ± .015) 6.99 ± .38 (.275 ± .015) 5.08 ± .38 (.200 ± .015) 10.31 + .00/- .13 (.406+.000/-.005) .25 (.010) 1.19 (.047) 7.92 (.312) .81 (.032) 20.62 ± .81 (.812 ± .032) 18.6 ± .4 (.732 ± .015) 12.2 (.48) 11.81 (.465) DIA.22.22 ± .38 (.875 ±.015) DIA. R MAX. 12.70 ±0.25 (.500 ± .010) MOUNTING SURFACE 15.54 (.612) 12.2 (.480) 11.81 (.465) DIA. 22.22 ± .38 (.875 ±.015) DIA. R MAX. BUSHING DIA. (SEE PART NUMBERS) 3/8-32 UNEF .76 ± .25 .030 ± .010 SHAFT DIA. (SEE PART NUMBERS) 5.08 ± .38 (.200 ± .015) 6.99 ± .38 (.275 ± .015) 10.31 +.00/-.10 (.406 +.000/-.004) R 5.08 ± .38 (.200 ± .015) .25 (.010) 7.93 (.312) .81 (.032) 20.63 ± .81 (.812 ± .032) .81 ± .25 (.032 ± .010) 18.59 ± .38 (.732 ± .015) -2, -4, -6, -8 Confi gurations-1, -3, -5, -7 Confi gurations Recommended PCB Layout FMSHOLE DIAMETER 2.08 (.082) 5.08 (.200) 5.08 (.200) 6.99 (.275) Schematic CCW CW CW TOLERANCES: EXCEPT WHERE NOTED FRACTIONS: ±1/64 MMDIMENSIONS: (IN.) Shaft & Bushing Confi gurations (Bushing - DxL, Shaft - D): (-1) Plastic Bushing (3/8 ” x 5/16 ”) and Shaft (.2480 + .001, - .002) (-2) Metal Bushing (3/8 ” x 5/16 ”) and Shaft (.2497 + .0000, - .0009) (-3) Sealed, Plastic Bushing (3/8 ” x 5/16 ”) and Shaft (.2480 + .001, - .002) (-4) Sealed, Metal Bushing (3/8 ” x 5/16 ”) and Shaft (.2497 + .0000, - .0009) (-5) Metric, Plastic Bushing (9 mm x 7.94 mm) and Shaft (6 mm + 0, - .076 mm) (-6) Metric, Metal Bushing (9 mm x 7.94 mm) and Shaft (6 mm + 0, - .023 mm) (-7) Metric, Sealed, Plastic Bushing (9 mm x 7.94 mm) and Shaft (6 mm + 0, - .076 mm) (-8) Metric, Sealed, Metal Bushing (9 mm x 7.94 mm) and Shaft (6 mm + 0, - .023 mm) Terminal Styles “P” Terminal Style “S” Terminal Style