3584JM

3584 BURR-BROWN | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

International Airport Industrial Park • Mailing Address: PO Box 11400 • Tucson, AZ 85734 • Street Address: 6730 S. Tucson Blvd. • Tucson, AZ 85706 Tel: (520) 746-1111 • Twx: 910-952-1111 • Cable: BBRCORP • Telex: 066-6491 • FAX: (520) 889-1510 • Immediate Product Info: (800) 548-6132 3584 High Voltage, High Speed OPERATIONAL AMPLIFIER

APPLICATIONS

l PROGRAMABLE POWER SUPPLY l PIEZO-ELECTRIC TRANSDUCER DRIVER l ELECTROSTATIC TRANSDUCER DRIVER l CRT DEFLECTION

FEATURES

l WIDE POWER SUPPLY VOLTAGE: ±70V to ±150V l GAIN-BANDWIDTH PRODUCT: 50MHz l SLEW RATE: 150V/ µs l FET INPUT: IB = 20pA max l THERMAL SHUT-DOWN PROTECTION l HERMETIC TO-3 PACKAGE, ISOLATED CASE

DESCRIPTION

The 3584 is a high voltage, high speed hybrid opera- tional amplifier designed for a wide variety of programmable power supply and transducer driver applications. The 3584 operates over a wide power supply range (±70V to ±150V) and provides outputs up to 15mA. Laser-trimmed FET input circuitry provides low offset voltage (3mV max) and low input bias current (20pA max). Thermal shut-down circuitry protects internal circuitry from excessive power dissipation. The 3584 provides a gain-bandwidth product of 20MHz min (50MHz typical). External frequency compensa- tion (series R/C) allows the user to optimize the bandwidth and slew rate for a particular application. Specified temperature range is 0°C to +70°C. The 3584’s hermetic 8-pin TO-3 package is electrically isolated from all internal circuitry. Output Offset Trim 3 4 2 Compensation –In +In © 1978 Burr-Brown Corporation PDS-376B Printed in U.S.A. October, 1993 SBOS131

PARAMETER CONDITIONS MIN TYP MAX UNITS OFFSET VOLTAGE Input Offset Voltage ±3m V vs Temperature Specified Temperature Range ±25 µV/°C vs Power Supply 20 µV/V vs Time 50 µV/month INPUT BIAS CURRENT (1) Input Bias Current V CM = 0V –20 pA vs Temperature Doubles Every 10°C vs Power Supply 0.2 pA/V Input Offset Current V CM = 0V ±20 pA vs Temperature Doubles Every 10°C vs Power Supply 0.2 pA/V NOISE Voltage, 0.01Hz to 10Hz 5 µVp-p 10Hz to 1kHz 1.7 µVrms Current, 0.01Hz to 10Hz 0.3 pAp-p INPUT VOLTAGE RANGE Maximum Safe Differential Input (V+) + |V–| Maximum Safe Common-Mode Input V– to V+ Common-Mode Input Range Linear Operation V S – 10 V Common-Mode Rejection 110 dB INPUT IMPEDANCE Differential 1011||10 Ω || pF Common-Mode 1011 Ω || pF OPEN-LOOP GAIN Open-Loop Voltage Gain No Load, DC 120 dB Open-Loop Voltage Gain Rated Load, DC 100 dB FREQUENCY RESPONSE Unity-Gain Bandwidth Small-Signal 7 MHz Gain-Bandwidth Product f = 1kHz, G = 100 20 MHz Full-Power Bandwidth G = 100 135 kHz Slew Rate G = 100 150 V/ µs Settling Time: 0.1% G = 100 12 µs OUTPUT Voltage Output VS - 5 V Current Output ±15 mA Short Circuit Current ±25 mA Load Capacitance (Maximum) 10 nF POWER SUPPLY Operating Voltage Range ±70 ±150 V Quiescent Current I O = 0 ±6.5 mA TEMPERATURE RANGE Specification 0 +70 °C Operating –55 +125 °C Storage –55 +150 °C The information provided herein is believed to be reliable; however, BURR-BROWN assumes no responsibility for inaccuracies or omissions. BURR-BROWN assumes no responsibility for the use of this information, and all use of such information shall be entirely at the user’s own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. BURR-BROWN does not authorize or warrant any BURR-BROWN product for use in life support devices and/or systems. SPECIFICATIONS ELECTRICAL TCASE = +25°C, VS = ±150V, unless otherwise noted. NOTE: (1) Inputs may be damaged by input slew rates exceeding 1000V/µs. Inputs can be protected from signals exceeding 1000V/µs by limiting input current to 150mA with external series resistors (pins 5 and 6).

CONNECTION DIAGRAM ORDERING INFORMATION TEMPERATURE MODEL PACKAGE RANGE 3584JM 8-Pin TO-3 0 °C to +70°C TYPICAL PERFORMANCE CURVES TCASE = +25°C, VS = ±150V, unless otherwise noted. Top View +V CC –VCC Compensation Output +In Offset Trim to +VCC 4 Optional Socket: Burr-Brown Model 0804MC –In 100kΩ Offset Trim Optional Offset Adjust R C C C PACKAGE DRAWING MODEL PACKAGE NUMBER (1) 3584JM 8-Pin TO-3 030 NOTE: (1) For detailed drawing and dimension table, please see end of data sheet, or Appendix D of Burr-Brown IC Data Book.

PACKAGE INFORMATION

Frequency (Hz) OUTPUT VOLTAGE vs FREQUENCY Output Voltage (±Vp-p) 100k 1M10k 10M 150 120 Compensation: 200Ω and 0.1µF 2kΩ and 500pF 20Ω and 50pF 40 50 60 80 90 100 Power Supply (% of max) 0.5 SLEW RATE vs SUPPLY VOLTAGE AT FULL LOAD Normalized Slew Rate 1.0 0.9 0.8 0.7 0.6 25°C to 85°C (Case) –25°C (Case) Compensation: 200Ω and 0.01µF External Compensation Impedance (Ω ) SLEW RATE vs COMPENSATION Slew Rate (V/µs) 2k200 20k 160 120 Frequency (Hz) –20 OPEN-LOOP FREQUENCY RESPONSE FULL LOAD Voltage Gain (dB) 120 100 1 10k 10M10 100 1k 100k 1M Compensation: 200Ω and 0.1µF 2kΩ and 500pF 20Ω and 50pF

TYPICAL PERFORMANCE CURVES (CONT) TCASE = +25°C, VS = ±150V, unless otherwise noted. OPEN-LOOP GAIN vs SUPPLY VOLTAGE AT MAX LOAD Power Supply (% of max) Δ Open-Loop Gain (dB) 40 100 50 90 60 70 80 25°C (Case) –25°C (Case) +85°C (Case) POWER DISSIPATION Temperature (°C) Internal Power Dissipation (W) 0 25 125 50 75 100 JC = 12°C/W JA = 42°C/W Ambient θ θ Case SAFETY OPERATING AREA (Secondary Breakdown) Output Voltage Output Current –30 –150 150–100 100 –50 0 50 –10 –20 DC Internal Current Limit 5ms 5ms DC NOISE vs SOURCE RESISTANCE Source Resistance (Ω ) Total Input Noise (µVp-p, µVrms) 103 104 108105 106 107 1000 100 Noise of Source Resistor (p-p) 0.01Hz to 10kHz (rms) 10Hz to 10kHz (rms) 10Hz to 1kHz Amplifier Noise CURRENT LIMIT vs TEMPERATURE Case Temperature (°C) Normalized Current Limit (%) –40 –50 –25 125 25 50 100 –10 –20 –30 07 5 1 10 100 10k 100k 1M Frequency (Hz) COMMON-MODE REJECTION CMR (dB) 120 100 Compensation: 200Ω and 0.01µF

Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue any product or service without notice, and advise customers to obtain the latest version of relevant information to verify, before placing orders, that information being relied on is current and complete. All products are sold subject to the terms and conditions of sale supplied at the time of order acknowledgment, including those pertaining to warranty, patent infringement, and limitation of liability. TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except those mandated by government requirements. Customers are responsible for their applications using TI components. In order to minimize risks associated with the customer’s applications, adequate design and operating safeguards must be provided by the customer to minimize inherent or procedural hazards. TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right of TI covering or relating to any combination, machine, or process in which such semiconductor products or services might be or are used. TI’s publication of information regarding any third party’s products or services does not constitute TI’s approval, warranty or endorsement thereof. Copyright  2000, Texas Instruments Incorporated