3535-O AMP | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Features

  • DC bus voltage 12-35 VDC motor supply (includ- ing ripple)
  • Switch selectable motor current from 0.4–3.5 amps/phase
  • Switch selectable full or half step
  • Automatic 50% idle current reduction
  • Optically isolated 5 VDC inputs, step, direction and enable
  • Enable input to turn off current to the motor.
  • On-board oscillator generates step pulses and accel/decel ramps
  • On-board trimpot or external speed adjustment
  • 122 watts of usable power
  • Screw terminal connectors
  • M OSFET, dual H-bridge, inaudible PWM amplifier
  • 3 state, pulse width modulated current control, switching at 20–30 KHz.
  • Drives 4, 6 or 8 lead size 11, 14, 17 or 23 step motors
  • CE compliant

Description

The 3535O step motor driver is a full or half step drive, step phase sequencer with MOSFET three state switching amplifiers and optoisolated circuits. This drive has a built in ramping pulse generator (oscillator) with adjustable speed, acceleration and deceleration. Oscillator speed range is 400–5,000 Hz. Speed can be set from on-board trimpot or ex- ternal pot. A jumper allows you to select the internal oscillator. In oscillator mode, the pulse input becomes a run/ stop signal: when this signal is set high, the motor accelerates to a preset speed and slews. Lowering the input signal causes the drive to decelerate to rest. The amplifier regulates motor current by chopping at a constant, inaudible frequency. Phase current is selected from 32 levels by a DIP switch.

3535 O Step Motor Drive with Oscillator

2.50" 3.75" 0.125" 3.00" 0.25" 4.00" 0.15" 4x Ø.125 3.70" 1.50" 0.25" .875" 2x Ø.125 MECHANICAL OUTLINE Amplifier step direction ext speed pot Step Sequencer Oscillator STEP/SLEW JUMPER current setting full step/ half step step dir accel decel speed adj to motor enable Optical Isolator Optical Isolator 12-35 VDC Optical Isolator 6 5 4 3 2 BLOCK DIAGRAM Recommended motors for the 3535 O drive: HT11-012 5014-842 HT17-068 HT23-394 HT11-013 HT17-071 HT23-397 HT17-075 HT23-400

404 Westridge Dr. • Watsonville, CA 95076 831/761-6555 • 800/525-1609 • FAX 831/761-6544 www.appliedmotionproducts.com STEPPER DRIVES

3535 O Torque Curves

Motor Connection: 4 Lead Bipolar Drive Setting: Full Resolution • 1.0 A/Phase Dynamic Torque (oz-in) rev/sec 05 1 0 15 20 25 30 35 400 35 V HT11-013 MOTOR Motor Connection: 4 Lead Bipolar Drive Setting: Full Resolution • 1.0 A/Phase Dynamic Torque (oz-in) rev/sec 05 1 0 15 20 25 30 35 400 35 V 5014-842 MOTOR Motor Connection: Parallel Drive Setting: Full Resolution • 1.0 A/Phase Dynamic Torque (oz-in) rev/sec 05 1 0 15 20 25 30 35 400 35 V 24 V HT17-068 MOTOR Motor Connection: Parallel Drive Setting: Full Resolution • 1.3 A/Phase Dynamic Torque (oz-in) rev/sec 05 1 0 15 20 25 30 35 400 35 V 24 V HT17-071 MOTOR Motor Connection: Parallel Drive Setting: Full Resolution • 1.7 A/Phase Dynamic Torque (oz-in) rev/sec 05 1 0 15 20 25 30 35 400 35 V 24 V HT17-075 MOTOR Motor Connection: Parallel Drive Setting: Full Resolution • 1.7 A/Phase Dynamic Torque (oz-in) rev/sec 05 1 0 15 20 25 30 35 400 35 V 24 V HT23-394 MOTOR Motor Connection: Parallel Drive Setting: Full Resolution • 2.8 A/Phase Dynamic Torque (oz-in) rev/sec 05 1 0 15 20 25 30 35 400 35 V 24 V HT23-397 MOTOR Motor Connection: Parallel Drive Setting: Full Resolution • 2.8 A/Phase Dynamic Torque (oz-in) rev/sec 05 1 0 15 20 25 30 35 400 120 150 35 V 24 V HT23-400 MOTOR Motor Connection: Parallel Drive Setting: Full Resolution • 2.8 A/Phase Dynamic Torque (oz-in) rev/sec 05 1 0 15 20 25 30 35 400 100 150 200 250 35 V 24 V