3502RA

T3F SWITCH | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 4

Technical content

• Number of insert contact or pins must be specified to complete part number. ◊ Available on special order only; contact Switchcraft for price and delivery. 1 Non-reflective gray finish, gold-plated pins. Q-G ® CORD PLUG CONNECTORS AND RECEPTACLES Part Number Part Number Insert Contacts ◊T3F ◊T3FL 3 ◊T3FM ◊T3FLM 3 ◊T4F ◊T4FL 4 ◊T4FM ◊T4FLM 4 T(*)FStraight female cord plug with DPDT (2-C) locking on-off switch; standard latchlock. T(*)FMStraight female cord plug with SPDT (1-C) momentary on-off switch; standard latchlock. Slide switches rated 500 mA, 125V (AC or DC). Mounting screws are supplied. T(*)F AND T(*)FM CORD PLUG WITH ON-OFF SWITCH D(*)M, D(*)F AND D(*)FD RECEPTACLES Nickel Black Finish Finish Silver Gold Detent QGP Series 1 Pins D3M D3MB D3MBAU — QGP363 3 D4M D4MB D4MBAU — — 4 D5M D5MB D5MBAU — — 5 D6M D6MB D6MBAU — — 6 D7M D7MB D7MBAU — — 7 D3F D3FB D3FBAU D3FD QGP362 3 D4F D4FB D4FBAU ◊D3FDB — 4 D5F D5FB D5FBAU — — 5 D6F D6FB D6FBAU ◊D6FDB — 6 D7F D7FB D7FBAU — — 7 Q-G CORD PLUG CONNECTORS AND RECEPTACLESQ-G CORD PLUG CONNECTORS AND RECEPTACLES Studio quality black and gold Q-G® receptacle with black housing and gold contacts is designed for low/stable contact resistance and withstands corrosion where highest quality is required for recording and broadcast studio equipment, consoles, and other applications. D(*)M SERIES – Male receptacle for panel or chassis mounting. Special rectangular flange permits close spacing on crowded panels, has two .136" (3.45mm) diameter countersunk holes for #5-40 flat head mounting screws (not supplied). Mounts from front of panel or chassis in .766" (19.45) diameter hole. Satin nickel finish (Series D*M) or black finish (Series D*MB, or D*MBAU). D(*)F SERIES – Female receptacle for panel or chassis mounting. Flange has two .136" (3.45 mm) diameter countersunk holes for #5-40 flat head mounting screws (not supplied). Mounts from front of panel or chassis in .953" (24.21 mm) diameter hole. Series D(*)F has standard latchlock; Series D(*)FD has FAS-DISCONNECT detent. Satin nickel finish (Series D*F and D*FD) and “Black-Velvet” finish (Series D*FBAU). SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630 CONNECTORS & RECEPTACLES FAX: 773 792-2129 CONNECTORS & RECEPTACLES DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) * Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630 121 JACKS AND PLUGS FAX: 773 792-2129 JACKS AND PLUGS DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) SUBMINIATURE PHONE JACKSSUBMINIATURE PHONE JACKS SUBMINIATURE PHONE JACKS, TR2A AND TR1PC Extremely small, rugged, shunted Micro-Jax® 2-conductor jack is 1/4 the size of a standard phone jack and weighs less than 1/20 ounce. Can be wired for open or closed circuit operation. Internally keyed insulators interlock all parts and tip springs grip mating plugs positively. Mates with Switchcraft Micro-Plug ® phone plugs. Jacks mount through .190" diameter hole in chassis/panels up to .093" thick. For insulated mounting, a .281" diameter hole and .050" maximum panel thickness applies. Order insulating washer separately. Number P1617 (flat phenolic washer) and Number P1618(swedged fiber washer). Number TR1PC: 2-conductor closed circuit jack with PC terminals. Open frame and enclosed versions available. Mates with Switchcraft ® Micro Plug® numbers 850, 855, and 880. SUBMINIATURE ENCLOSED PHONE JACKS Micro-D Jax® 2-conductor jacks have insulated box construction and subminiature size. Number MDPC2A: 2-conductor closed circuit jack with PC terminals. Mounts to single-, double-sided or multilayer boards either singly or in rows as close as .344" centers (+/- .01 inches). Bushing is .10" inside diameter. Number MDSL2A: Same as MDPC2A except, 1. solder lugs, 2. bushing is #10-48 threaded (nut and washer supplied), and 3. mount ing centers are .35" or .313". When mounted on .313" centers, sleeves or adjacent jacks may be in intimate contact. Mounts through a .203" diameter hole in chassis/panels up to .063" thick. SUBMINIATURE RIGHT-ANGLE PHONE JACKS 2-conductor jacks have molded housing which protects all internal parts. Panel/chassis or PC boards mounting in rows, if desired, on .351" centers. PC terminals need only .382" behind-panel clearance. Number MDPC2ARA: PC terminals mount/terminate directly to PC or multilayer boards. Bushing clears a .156" diameter panel hole. Number MDSL2ARA: Right-angle solder lugs and #10-48 threaded bushing for chassis/panel mount. Mounts in .203" diameter hole in chassis/panels up to .063" thick. SPECIFICATIONS - MICRO-JAX ® ELECTRICAL: Contact Resistance:.10 ohms maximum (spring to plug). Shunt Resistance:.10 ohms maximum. Dielectric Withstanding Voltage:250 V AC. Shunt Tension:60 grams minimum. MATERIAL: Mounting Bushing: Nickel-plated copper alloy. Insulating Spacers:Rigid plastic. Springs:Nickel-plated copper alloy. Integral contacts are plated. Tip, Shunt and Sleeve Terminals:Silver-plated copper alloy. Hardware:Supplied with one,P15331 nickel-plated copper alloy hex nut, and one S29571 nickel-plated copper alloy flat washer. MATERIAL - TR1PC Threaded Bushing:Nickel-plated copper alloy. Tip Spring:Copper alloy. Sleeve/Ground Terminal:Copper alloy tin-lead with nickel underplate. MECHANICAL - TR1PC: Life:10,000 insertion/withdrawal cycles, minimum. Insertion/Withdrawal Forces:11 ounces insertion, 11 ounce minimum withdrawal. ENVIRONMENTAL - TR1PC: Thermal Range:-55°C to +85°C (non-operating); -20°C to +65°C (operating). Thermal Shock:Per MIL-STD-202, method 107. Humidity:Per MIL-STD-202, method 106. Salt Spray:Per MIL-STD-202, method 101. SPECIFICATIONS - MICRO-D JAX MECHANICAL: Life:10,000 insertion/withdrawal cycles minimum. Insertion/Withdrawal Forces:11 ounce insertion, 11 ounce minimum withdrawal. ELECTRICAL: Contact Resistance:.010 ohms maximum (initial), .020 ohms maximum (after humidity, durability exposure), .10 ohms maximum (after salt spray). Insulation Resistance:10,000 MΩminimum (initial), 1,000 MΩminimum (after humidity, durability exposure). Dielectric Withstanding Voltage:500 V AC maximum. Contact Rating:.125 A, 125 V AC. ENVIRONMENTAL: Thermal Range:-55°C to +85°C (non-operating); -20°C to +65°C (operating). Thermal Shock: Per MIL-STD-202, method 107. Humidity:Per MIL-STD-202, method 106. Salt Spray:Per MIL-STD-202, method 101. MATERIAL: Housing: Glass reinforced plastic.Insulation:Rigid plastic. Mounting Bushing (Micro-D):Nickel-plated copper alloy. Mounting Bracket (Right-Angle Micro-D): Nickel-plated copper alloy. Tip Spring:Silver-plated copper alloy. Shunt Terminal:Silver-plated copper alloy. Sleeve Terminal (Micro-D):Steel, tin-plated. Sleeve Terminal (Right-Angle Micro-D):Silver-plated copper alloy. Hardware (Micro-D):Same as Micro-Jax (MDSL2A). Hardware (Right-Angle Micro-D):Hex nut, nickel-plated copper alloy, Number P15331 ;flat washer, nickel-plated copper alloy S29571;not supplied with MDPC2A. All are 2-Conductor (closed circuit). Note 1.: See Jack Schematics page 79 and 80. Note 2.: See Plugs Section for mating information. .101" SUBMINIATURE PHONE JACKS TR2A TR1PC MDPC2A MDSL2A MDSL2ARA MDPC2ARA Part Jack Typical Part Jack Typical No. Schem. 1 Mating Plug2 No. Schem. 1 Mating Plug2 TR2A MDSL2A TR1PC } III 850 MDPC2ARA } III 850 MDPC2A MDSL2ARA * Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630 123 JACKS AND PLUGS FAX: 773 792-2129 JACKS AND PLUGS DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) PHONO JACKSPHONO JACKS Part Number Description BPJR01 Rear mount, black insulator BPJR01AU Rear mount, black insulator, gold plated BPJR02 Rear mount, red insulator BPJR02AU Rear mount, red insulator, gold plated BPJR03 Rear mount, white insulator BPJR03AU Rear mount, white insulator, gold plated BPJR04 Rear mount, yellow insulator BPJR04AU Rear mount, yellow insulator, gold plated BPJR05 Rear mount, blue insulator BPJR05AU Rear mount, blue insulator, gold plated BPJR06 Rear mount, green insulator BPJR06AU Rear mount, green insulator, gold plated 3501F Rear mount, rigid plastic mounting flange 3501FR Rear mount, natural insulator For insulated mounting, order S1028 and S1029 insulating washers BPJF01 Front mount, black insulator BPJF01AU Front mount, black insulator, gold plated BPJF02 Front mount, red insulator BPJF02AU Front mount, red insulator, gold plated BPJF03 Front mount, white insulator BPJF03AU Front mount, white insulator, gold plated BPJF04 Front mount, yellow insulator BPJF04AU Front mount, yellow insulator, gold plated Part Number Description BPJF05 Front mount, blue insulator BPJF05AU Front mount, blue insulator, gold plated BPJF06 Front mount, green insulator BPJF06AU Front mount, green insulator, gold plated 3501FP Front Mount, natural insulator 3505F RF version, uses low-loss nylon insulation For insulated mounting, order S2207 and S1564 insulating washers BPJJ01 Feed through, black insulator BPJJ01AU Feed through, black insulator, gold plated BPJJ02 Feed through, red insulator BPJJ02AU Feed through, red insulator, gold plated BPJJ03 Feed through, white insulator BPJJ03AU Feed through, white insulator, gold plated BPJJ04 Feed through, yellow insulator BPJJ04AU Feed through, yellow insulator, gold plated BPJJ05 Feed through, blue insulator BPJJ05AU Feed through, blue insulator, gold plated BPJJ06 Feed through, green insulator BPJJ06AU Feed through, green insulator, gold plated

3503 Extension jack, shielded handle

3514PC Vertical PC mount, nickel plated steel bushing 3515PC Vertical PC mount, ceramic bushing 3517PC Horizontal PC mount, nickel plated steel bushing BULKHEAD PHONO JACKS FEATURES AND BENEFITS

• Front or rear mount configurations
• Durable plated machined brass construction
• All mounting hardware is included

APPLICATIONS

• Audio
• Video
• General Purpose Electronics OPTIONS
• Front or rear mount solder type receptacles
• Jack to jack bulkhead configuration
• Insulator colors
• Gold or nickel plating SPECIFICATIONS Material and Platings Housing: Nickel or Gold-plated Brass Contact:Nickel-plated Brass Insulator:ABS Hardware: Nickel-plated Brass. Switchcraft introduces a complete line of bulkheadmount phono (RCA) jacks to meet the most critical audio, audio/video, and general-purpose electronic applications. These jacks are offered in front and rear mount solder type as well as jack to jack bulkhead configurations. These jacks are available with black, white, blue, green, red, and yellow insulators and nickel or gold plated bodies. All mounting hardware is included. Housing: Nickel or gold plated, copper alloy (3514PC, 3515PC, 3517PC: Nickel plated, steel) Terminals:Nickel plated, copper alloy (3515PC: Tin plated, copper alloy) Bushing: Nickel-plated, copper alloy (3515PC: Ceramic) Insulators:Thermoplastic (3517PC: Ceramic and glass filled thermoplastic) 3517PC BPJR01 BPJF01 BPJJ01 3505F 3503 3501F 3501FP 3501FR 3514PC 3515PC (See next page for drawings.) * Please visit the product pages on our website for the most up-to-date product information

SWITCHCRAFT, INC. 5555 N. Elston Ave. • Chicago, IL 60630 161 JACKS AND PLUGS FAX: 773 792-2129 DIMENSIONS ARE FOR REFERENCE ONLY Inch (mm) PHONO PLUGSPHONO PLUGS PHONO PLUGS (continued) Part Description Typical Number Pin Handle Notes Mating Jack 3502A Nickel Nickel BP Series 3502AAU Gold Nickel BP Series 3502ABAU Gold Black BP Series 3502RA Nickel Nickel Right angle BP Series 3502RABAU Gold Black Right angle BP Series 3502RAAU Gold Nickel Right angle BP Series

35581 Nickel Plastic Red handle BP Series

35582 Nickel Plastic Black handle BP Series

35585 Nickel Plastic White handle BP Series

3502 Nickel Nickel BP Series

3501MC Nickel Same as 3501M except with cable clamp BP Series 3504M Nickel Same as 3507 less cable clamp and handle 3505F

3507 Nickel Nickel For RF applications 3505F

330F1 Nickel 2 inline jacks to 1 male plug, 4" gray shielded cable BP Series 330F2 Nickel1 inline jack, 1 male plug to 1 male plug, 4" gray shielded cable BP Series 3507 3502RA 3502A 3501M & 3504M35581, 33582, 33585 3502 3501MC JACKS AND PLUGS * Please visit the product pages on our website for the most up-to-date product information