3428-1303 3M | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Electronic Solutions Division Interconnect Solutions http://www.3Mconnectors.com 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Three-Wall Header .100” × .100” Latch/Ejector, Straight and Right Angle 3000 Series

  • Military (with 3M’s 3518 or N3518 polarizing key) and center bump polarization
  • Low profile
  • Optional ejector latches
  • Mounting holes for securing header to board
  • Three wall shroud provides design flexibility
  • Solder tail and wrap tail options
  • Optional polarizing posts available
  • Optional high temperature insulator suitable for “no lead” soldering operations
  • High temperature option is suitable for reflow soldering using “paste in hole” techniques
  • See the Regulatory Information Appendix (RIA) in the “RoHS compliance” section of www.3Mconnectors.com for compliance information Date Modified: May 21, 2012 TS-0771-F Sheet 1 of 5 Physical Insulator: Material: Glass Filled Polyester (PBT) Glass Filled Polyester (PCT) - High Temp Option Flammability: UL 94V-0 Color: Gray (PBT), Black (PCT) Contact: Material: Copper Alloy Plating: Underplating: 100 μ” [ 2.54 μm ] Nickel - Overall Wiping Area: 30 μ” [ 0.76 μm ] Gold Solder Tails: 200 μ” [ 5.08 μm ] Tin Lead or Matte Tin (See Ordering Information) Marking: 3M Logo, Part Identification Number and Orientation Triangle Electrical Current Rating: 5.00 A, 1 Contact Powered

3.00 A, 6 Contacts Powered

1.75 A, All Contacts Powered

Rating Conditions: EIA-364-070 Method 2, 30°C maximum temperature rise, 20% derated. Reference appropriate 3M Product Specification for detailed current derating curves. Insulation Resistance: >1 × 109 Ω at 500 VDC Withstanding Voltage: 1000 VRMS at Sea Level Environmental Temperature Rating: -55°C to +105°C Process Rating: High Temp PCT insulator version: 260°C, per J-STD-020C, single pass PBT insulator version: 191°C, maximum insulator temperature, solder wave process only Moisture Sensitivity Level: 1 (per J-STD-020C) High Temp. (PCT) versions only UL File No.: E68080

Electronic Solutions Division Interconnect Solutions http://www.3Mconnectors.com 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Three-Wall Header .100” × .100” Latch/Ejector, Straight and Right Angle 3000 Series TS-0771-F Sheet 2 of 5 .25 6.4 .31 7.9 .28 7.1 D .100 2.54 REF. B POSITION #1 .15 3.8 .020 0.51 .100 2.54 REF. .13 3.3 2X O .100 [2.54] SEE NOTE #2 .573 ± .010 [ 14.55 ] -X2XX Header with Short Ejector/Latch for 3M Sockets without Strain Relief -X3XX Header with Long Ejector/Latch for 3M Sockets with Strain Relief .424 ± .010 [ 10.77 ] .08 [2.0] .97 Ref [24.6] .37 Ref [9.4] .46 Ref [11.7]

1.07 Ref

[27.2] .08 [2.0] F Typ Section A-A (Straight) E ± .010 .30 [7.6] .24 [6.1] .025 ± .002 Sq Typ [ 0.64 ] CL “Y” .025 ± .002 Sq Typ [ 0.64 ] Position 1 Orientation Triangle .21 [5.3] .24 [6.1] .30 [7.6] F Typ E ± .010 .049 Ref .100 Ref [2.54] 2X Ø .100 [2.54] (See Note 2) A C .16 [4.1] .197 [5.00] .20 [5.1] Notch C (See Table 1 & Note 1) Notch B (See Table 1) Notch A (See Table 1 & Note1) B B Section B-B .68 [17.3] .35 [8.9] .020 [0.51] A A CL “Y” (Right Angle) .12 [3.0] -X0XX Header without Latchs A .68 [17.3]

Electronic Solutions Division Interconnect Solutions http://www.3Mconnectors.com 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Three-Wall Header .100” × .100” Latch/Ejector, Straight and Right Angle 3000 Series TS-0771-F Sheet 3 of 5 Table 1 Pin Qty 3M Part Number Dimensions Polarizing NotchesA B C D Inch (mm) ± .005± .1 ± .01 Tolerance Unless Noted .0 .00 .000 Inch [ ] Dimensions for Reference only Table 2 3M Part Number Suffix Contact Tail Dimension E Pin Cross Section Dimension G Dimension F Diagonals Corner Radii -1XX2 -2XX2 Solder Tail for .062 (1.57) Thick PC Board .112 (2.84) .0245 ± .0005 (0.622) .028 ± .001 (0.71) .0075 Ref (0.191) 0.035 ± .003 (0.89) (See Note 3) -1X03 -2X03 Solder Tail for (3.18) Thick PC Board .155 (3.94) .0245 ± .0005 (0.622) .028 ± .001 (0.71) .0075 Ref Notes: 1. Notches A & C will accomodate 3M Polarizing Keys (3M Part #3518 or N3518). 2. Accepts Rear and Front mounting hardware: Rear Entry: #4-24 thread cutting screw, 3M Part #3341-5, .116 [2.95] dia mounting hole Front Entry: (Prior to installation of latch on Straight Versions) #2-56 bolt and nut, 3M Part #3341-6, .106 [2.69] dia mounting hole. See illustrations on page 5. Kink is located .05” below bottom surface of plastic. External radius of kink toward part centerline Ø.106 [2.69] or Ø.116 [2.95] (See Note 2) G Dim Position 1 .100 ± .003 [2.54] .100 ± .003 [2.54] .060 [1.52] .300 [7.62] Side to Side Stackability B Recommended Mounting Hole Pattern (Straight) .352 [8.94] CL“Y” CL .41 [10.4] Max to Edge of PCB for Daisy Chain Ø.106 [2.69] or Ø.116 [2.95] (See Note 2) G Dim .029 [0.74] .100 ± .003 [2.54] Position 1 .232 [5.89] C Recommended Mounting Hole Pattern (Right Angle) .100 ± .003 [2.54] “Y”

Electronic Solutions Division Interconnect Solutions http://www.3Mconnectors.com 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Three-Wall Header .100” × .100” Latch/Ejector, Straight and Right Angle 3000 Series TS-0771-F Sheet 4 of 5 Part Customization This spec sheet details our standard offering. 3M has several capabilities that can provide a part tailored to your specific needs. Ask your 3M sales representative or customer service for more details. Use of snap-in style latch/ejectors in either short (N3XXX X5XX) or long (N3XXX-X6XX) styles, installed or shipped separately (the -5 & -6 snap-in latches are dimensional and functional equivalents to the -2 & -3 roll pin latches) which are also available separately with roll pins included. Refer to chart below. If ordering snap-in or roll pin style latches separately, please use the below chart Short Latch Long Latch Latch Style Color Standard Temperature (PBT) 3505-2 3505-3 Roll Pin Gray High Temperature (PCT) N3505-2B N3505-3B Roll Pin Black High Temperature (PBT) 3505-30 3505-31 Snap-In Gray High Temperature (PPA) N3505-30B N3505- 31B Snap-In Black

  • Selective pin removal (ATA or other compatability)
  • Wire wrap tails styles Kinked Tail (K2 option) positions: 2500 & 3000 Series Shrouded Header Total Num- ber of Pins Number of Tails Kinked Positions Kinked 10 4 3 4 7 8 14 4 3 4 11 12 16 4 3 4 13 14 20 4 3 4 17 18 24 4 3 4 21 22 26 4 3 4 23 24 30 4 5 6 25 26 34 4 7 8 27 28 36 4 7 8 27 28 40 4 7 8 33 34 50 4 7 8 43 44 60 4 11 12 49 50 64 4 11 12 53 54 Kinked Tail Detail: Kink is located .05” below bottom surface of plastic. External radius of kink toward part centerline.

Ordering Information

N = High Temp Black (PCT)/(RB Plating Req’d) Blank = Std. Temp Gray (PBT) /(Blank or UB Pltg. Req’d.) 3M Part Number (See Table 1) Latch/Ejector System 0 = No Latch/Ejector 2 = Short Roll PinLatch/Ejectors 3 = Long Roll Pin Latch/Ejectors Shroud and Pin Configuration 1 = 3 Wall, Right Angle Solder Tail 2 = 3 Wall, Straight Solder Tail Tail 02 = Solder Tail for .062 [1.57] Thick Board K2= Kinked Solder Tails for .062 [1.57] Thick Board 03 = Solder Tails for .094 to .125 [2.39 to 3.18] Thick Board RB = 30 μ” Gold with Matte Tin Tails (App. E1 & C1 Apply) Blank or UB = 30 μ” Gold with Sn/Pb Tails (App. E3 & C2 Apply)

Electronic Solutions Division Interconnect Solutions http://www.3Mconnectors.com 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ Three-Wall Header .100” × .100” Latch/Ejector, Straight and Right Angle 3000 Series TS-0771-F Sheet 5 of 5 .321 [8.15] .100 Dia [2.54] Polarizing Post Note: Insert Post into one mounting hardware hole on bottom of header. Set post to protrude .115” [2.92] 3 201 -3 P B T G ra y 3 201 -4 L C P B la c k Polarizing Keys .15 [3.8] .09 [2.3] A Breakaway Tab .34 Ref [8.6] Note: #2216 B/A Scotchweld can be used to adhere keys. Dim A N3518 LCP Black .02 3518 PBT Gray .02 Mounting Hardware .31 [7.9] .50 [12.7] Panhead Thread Cutting Screw: #4-24 X 5/16”□ Type: USA Std BT, Federal BG Hex Head Bolt, Nut and Washer Bolt - #2-56 X 1/2”□ 3341-5 (Installed from bottom of board) 3341-6 (Must be inserted prior to latch on vertical headers) 3341-5 & 6 Material - Stainless Steel

All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. Please recycle. Printed in USA. © 3M 2012. All rights reserved. RIA-2217B-E 3M Electronics Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 U.S.A. 1-800-225-5373 www.3Mconnectors.com 3M is a trademark of 3M Company.