3382_12 BOURNS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Features

■ Surface mount and through-hole versions ■ 12 mm Square / Dustproof ■ One million rotational cycles ■ Thin profi le ■ RoHS compliant*

Applications

■ Volume control on audio equipment ■ Motion controllers ■ Dishwasher control systems ■ Automotive temperature range 3382 - 12 mm Rotary Position Sensor *RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specifi cations are subject to change without notice. Customers should verify actual device performance in their specifi c applications.

Electrical Characteristics

Insulation Resistance @ 500 VDC Dielectric Strength Environmental Characteristics Power Rating (16 volts max.) Operating Temperature Range Temperature Coeffi cient ....±500 ppm/°C Load Life @ 50 °C Rated Power TRS ±20 % TRS ±20 %; VRS ±10 % Physical Characteristics Mechanical Angle ....Continuous rotation and date code Standard Packaging Product Dimensions DIMENSIONS: MM (INCHES) 1 3 CW CLOCKWISE CCW

2 WIPER

TOLERANCES: ±0.30 UNLESS OTHERWISE NOTED ±(.012) 3382G 3382H Recommended Land Pattern Rotor Dimensions How To Order

3382 G - 1 - 103 G

G = SMD with 8.5 mm Locator Pin Spacing H = Through-hole with 5 mm x 7.5 mm Locator Pin Spacing Standard Product Indicator -1 = 4 mm Shaft Diameter -2 = 3.5 mm Shaft Diameter Resistance Code Packaging Designator G = 1000 pcs./13 ” Reel (G Style) Blank = 50 pcs./Tube (H Style) Standard Resistance Table Resistance Resistance (Ohms) Code 2,500 252 5,000 502 10,000 103 25,000 253 50,000 503 100,000 104 *RoHS COMPLIANT

Specifi cations are subject to change without notice. Customers should verify actual device performance in their specifi c applications. 3382 - 12 mm Rotary Position Sensor Processing Information Process Description Materials Temperature Time Interval 1. Apply solder paste to test board • Sn/Ag/Cu Alloy water Room temperature (8 - 10 mil thick) soluble or no clean solder paste

  • Single sided epoxy glass (G10) (UL approved)
  • PC board approx. 4x4x.06 in. 2. Place test units onto board 6 units/board 3. Ramp up Convection oven 2.5 °C ±0.5 °/second 4. Preheat 150 °C to 190 °C 90 ±30 seconds 5. Time above liquidus 220 °C 60-90 seconds 6. Peak temperature 260 °C +0 °/-5 ° 10-20 sec. within 5 °C of peak 7. Ramp down Room temperature 3 °C ±0.5 °C/second 300 255 TEMPERATURE (°C) 220 190 150 0 50 100 150 TIME (SECONDS) 200 250

16.0 (0.6) EMBOSSED CARRIER 0.3 (0.0) HEAT SEALED 1.5 (0.1)DIA. 2.1 (0.1) 2.4 (0.1) 1.75 (0.069) 0.9 (0.0) 11.5 (0.5) 24.0 (0.9) 14.9 (0.6) REF. 16.0 (0.6) REF. 4.0 (0.2) 8.0 (0.3) 11.00 (0.433)REF. 11.53 (0.454)REF. 330.2 ± 5.1 (13.0 ± 0.2) 13.0 ± 0.5 (0.5 ± 0.0) 1.8 ± 0.3 (0.1 ± 0.0) 18.7 ± 0.8 (0.7 ± 0.0) 99.1 ± 1.0 (3.9 ± 0.0) 16.5 ± 2.0 / -.000 REEL TAPE EQUAL SPACED 3 PLCS. DIA. DIA. DIA. 103G-1 TAIWAN 237T 103G-1 TAIWAN 237T REV. 06/12 Specifi cations are subject to change without notice. Customers should verify actual device performance in their specifi c applications. 3382 - 12 mm Rotary Position Sensor Packaging Specifi cations DIMENSIONS: MM (INCHES)