337RZS016M

226RZS050M ILLINOISCAPACITOR | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

3757 W. Touhy Ave., Lincolnwood, IL 60712 • (847) 675-1760 • Fax (847) 673-2850 • www.illcap.com I High Ripple Current I Low Impedance I Low ESL and ESR I 100 kHz Operating Frequency Range I Capacitance Range 22 µF to 2,200 µF I Voltage Range 6.3 WVDC to 63 WVDC I Solvent Tolerant End Seals Standard

FEATURES

+105°C High Frequency Radial Lead Aluminum Electrolytic Capacitors Operating Temperature Range SPECIFICATIONS Capacitance Tolerance SPECIAL ORDER OPTIONS

• Special tolerances: ±10% (K), -10% + 30% (Q) • Tape and Reel • Tape Ammo Pack • Cut, Formed, Cut and Formed and Snap In Leads
• Epoxy end seal • Mylar Polyester Sleeve -55°C to +105°C ± 20% at 120Hz, 20°C Shelf Life ≤ 20% initial readings ≤ 250% of initial specified value ≤ 200% of initial specified value Load Life 2,000 hours + 105°C with rated voltage For Switching Power Supplies Impedance Ratio WVDC Leakage Current 2 minutesTime .01 CV or 3 µA whichever is greater WVDC ≤ 63 WVDC Dissipation Factor 120Hz, 20°C tan δ WVDC 6.3 10 16 25 35 50 63 ≤ 20% of initial measured value ≤ 200% of initial specified value ≤ initial specified value Capacitance change Dissipation factor Leakage current Capacitance change Dissipation factor Leakage current 1,000 hours at +105°C with no voltage applied. Note: For above D.F . specifications, add .02 for every 1,000 µF above 1,000 µF (See pages 33 thru 37) 6.3 10 16 25 35 50 63 Aluminum Electrolytic

3757 W. Touhy Ave., Lincolnwood, IL 60712 • (847) 675-1760 • Fax (847) 673-2850 • www.illcap.com L RZS +105°C High Frequency Radial Lead Aluminum Electrolytic Capacitors PHYSICAL DIMENSIONS (32) (20) (13) 6.3 (8) 470 330 1,000 (44) PVC SLEEVE d L L L L L L L L L 19.0 MIN L15.0 MIN (µF) 100 220 2,200 L (63) (79) 10x12.5 10x16 10x12.5 10x16 10x12.5 10x16 10x20 10x12.5 10x16 10x20 12.5x20 12.5x25 10x12.5 10x16 12.5x20 12.5x25 16x25 16x31.5 10x16 10x20 12.5x25 16x25 16x31.5 16x35.5 10x20 12.5x20 16x25 16x35.5 12.5x25 16x25 16x31.5 16x25 16x31.5 16x35.5 NOTE: Case Vent is standard on all diameter ≥8.0mm LEAD INFORMATION VS. CASE DIAMETER Convert to inches, divide by 25.4 DxL(mm) L≤16 L 1 = L + 1.5 mm Max. L>16 L 1 = L + 2.0 mm Max. D1 = D + B Max. D =12.5 and L>25, d=0.8 S 1 = S ± 0.5 mm WVDC (SV) L

3757 W. Touhy Ave., Lincolnwood, IL 60712 • (847) 675-1760 • Fax (847) 673-2850 • www.illcap.com .55 RZS +105°C High Frequency Radial Lead Aluminum Electrolytic Capacitors STANDARD PART LISTING 220 63 227RZS063M 0.377 1080 .14/.08 330 6.3 337RZS6R3M 1.005 360 .35/.27 330 16 337RZS016M 0.502 520 .21/.18 330 25 337RZS025M 0.402 700 .12/.1 330 35 337RZS035M 0.352 840 .09/.07 330 50 337RZS050M 0.301 1030 .09/.05 330 63 337RZS063M 0.251 1270 .08/.06 470 6.3 477RZS6R3M 0.705 490 .26/.23 470 16 477RZS016M 0.353 700 .12/.11 470 35 477RZS035M 0.247 1090 .08/.05 470 50 477RZS050M 0.212 1350 .06/.05 1,000 10 108RZS010M 0.249 900 .11/.11 1,000 16 108RZS016M 0.166 1150 .09/.09 1,000 25 108RZS025M 0.133 1320 .06/.06 2,200 6.3 228RZS6R3M 0.151 1090 .07/.07 2,200 10 228RZS010M 0.113 1520 .05/.05 2,200 16 228RZS016M 0.075 1780 .05/.05 22 50 226RZS050M 4.52 150 1.35/.6 22 63 226RZS063M 3.768 200 1.35/.6 33 35 336RZS035M 3.517 180 .9/.53 33 63 336RZS063M 2.512 240 .9/.5 47 35 476RZS035M 2.469 210 .8/.53 47 50 476RZS050M 2.116 260 .8/.5 47 63 476RZS063M 1.764 310 .8/.5 100 16 107RZS016M 1.658 240 .54/.45 100 25 107RZS025M 1.326 310 .36/.27 100 35 107RZS035M 1.161 370 .35/.23 100 50 107RZS050M 0.995 450 .3/.1 100 63 107RZS063M 0.829 540 .3/.1 220 6.3 227RZS6R3M 1.507 250 .48/.45 220 16 227RZS016M 0.754 400 .29/.26 220 25 227RZS025M 0.603 540 .15/.14 220 35 227RZS035M 0.528 650 .15/.1 220 50 227RZS050M 0.452 820 .14/.08 PART NUMBER Maximum ESR Ω +2 0 ° C , 120Hz Capacitance (µF) Maximum RMS Ripple Current (mA) 100kHz,+105°C WVDC Impedance Ω 20°C 10k/100kHz Ripple Current Multiplier NOTE: When operated at temperatures below +105°C or at frequencies below 10kHz-100kHz, RMS Ripple current may be varied according to the multiplier values listed below. Peak Voltage not to exceed rated DC voltage. Caution: The surface temperature of the Capacitor shall not rise more than 10°C above the ambient temperature and shall never exceed +105°C. Ripple Current Multipliers 6.3-16 25-35 50-63 120 400 1K 100K .54 .43 .39 .73 .71 .95 .88 .86 1.0 1.0 1.0 1.0 +105°C 1.0 1.0 1.0 +85°C 2.20 2.20 2.20 +70°C 2.83 2.83 2.83 Frequency(Hz) Temperature(°C) (WVDC) 1.0 1.0 60 10K .57 .70 10x12.5 10x16 10x12.5 10x16 10x12.5 10x16 10x20 10x12.5 10x16 10x20 12.5x20 12.5x25 10x12.5 10x16 12.5x20 12.5x25 16x25 Dimensions DxL (mm) 16x31.5 10x16 10x20 12.5x25 16x25 16x31.5 16x35.5 10x20 12.5x20 16x25 16x35.5 12.5x25 16x25 16x31.5 16x25 16x31.5 16x35.5 Capacitance (µF) WVDC PART NUMBER Maximum ESR Ω +2 0 ° C , 120Hz Maximum RMS Ripple Current (mA) 100kHz,+105°C Impedance Ω 20°C 10k/100kHz Dimensions DxL (mm) Aluminum Electrolytic