DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
■ Conductive plastic ■ Linear tapers ■ Audio tapers available ■ PC board and bushing mount ■ Plastic bushing and plastic shaft ■ Withstands typical industrial washing processes ■ RoHS compliant* version available 3360 - 6 mm Square Sealed Panel Control *RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specifi cations are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specifi c applications.
Electrical Characteristics
Total Resistance Tolerance Absolute Minimum Resistance Effective Electrical Angle ..240 ° nominal Contact Resistance Variation (whichever is greater) Dielectric Withstanding Voltage (MIL-STD-202 – Method 301) Insulation Resistance Power Rating @ 70 °C (Derate to 0 at 125 °C Voltage Limited By Power Dissipation or 200 VAC, Whichever is Less) Theoretical Resolution Environmental Characteristics Operating Temperature Range Storage Temperature Range Temperature Coeffi cient Over Storage Temperature Range Total Resistance Shift .... ±2 % maximum Total Resistance Shift ... ±2 % maximum Total Resistance Shift Rotational Life (No Load) .. 50,000 Cycles Total Resistance Shift Contact Resistance Variation whichever is greater Method 103, Condition B Total Resistance Shift *RoHS COMPLIANTVERSIONS AVAILABLE How To Order
3360 Y - 1 - 103 LF
Single Cup: C = In-line Straight Terminals Side Exit P = 5.08 mm x 2.54 mm Triangular Pattern Rear Exit Y = 5.08 mm x 5.08 mm Triangular Pattern Rear Exit Bushing Designator 1 = Standard Resistance Code Terminations LF = 100 % Tin-plated (RoHS compliant) Blank = 90 % Tin / 10 % Lead-plated (Standard) Standard Resistance Table Resistance Resistance (Ohms) Code 1,000 102 2,000 202 5,000 502 10,000 103 20,000 203 50,000 503 100,000 104 200,000 204 500,000 504 1,000,000 105 Physical Characteristics Torque Starting Running Mounting (Torque on Bushing) [plastic bushing] Soldering Condition Recommended hand soldering using Sn95/Ag5 no clean solder, 0.025 wire diameter. model number, product code, terminal style, resistance code and date code Hardware (purchased separately) Popular distribution resistance values listed in boldface. Special resistances available.
3360 Y 503
*RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specifi cations are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specifi c applications. 3360 - 6 mm Square Sealed Panel Control Product Dimensions DIMENSIONS: MM (INCHES) REV. 02/13 COMMON DIMENSIONS 3360C 3360P 3360Y 3.35 (.131) 5.59 ± .25 (.220 ± .010) ACROSS FLATS 3.20 ± .25 (.126 ± .010) .38 (.015) MIN. STANDOFF 2.54 ± .25 (.100 ± .010) 2.54 ± .25 (.100 ± .010) 6.35 ± .025 (.250 ± .010) MOUNTING DIA. 2.36 ± .050 (.093 ± .002) DIA. 6.35 (.250) 5.44 (.214) MIN. FULL THREAD 12.70 ± .64 (.500 ± .025) 1/4-32 UNEF-2A THREADED PLASTIC BUSHING .33 (.013) MIN. STANDOFF 3.91 ± .38 (.154 ± .015) 4.70 ± .38 (.185 ± .015) .64 ± .10 (.030 ± .010)DEEPX ADJUSTMENT SLOT 6.71 ± .25 (.264 ± .010) 6.78 ± .25 (.266 ± .010) 5.97 ± .89 (.235 ± .035) .46 ± .05 (.018 ± .002) SOLDER PLATED COPPER PINS DIA. 123 .33 (.013) MIN. STANDOFF 5.97 ± .89 (.235 ± .035) 2.54 ± .38 (.100 ± .015) 3.58 ± .38 (.141 ± .015) TYP. 2.54 ± .25 (.100 ± .010) 2.54 ± .25 (.100 ± .010) 1CCW CW WIPER CLOCKWISE 5.97 ± .89 (.235 ± .035) 5.08 ± .25 (.200 ± .010) .97 ± .38 (.100 ± .010) 2.54 ± .25 (.100 ± .010)