3314Z-1-102E

3314Z-1-102E BOURNS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

Features

■ Surface Mount / Single Turn / Cermet Industrial / Sealed ■ Compatible with surface mount manufacturing processes ■ Compatible with popular vacuum pick-and-place equipment ■ J-hook, gull-wing and pinned confi gurations ■ Side adjust available ■ Meets EIA/EIAJ/IPC/VECI SMD standard trimmer designs ■ RoHS compliant* - see processing information on lead free surface mount trimmers ■ For trimmer applications/processing guidelines, click here 3314 - 4 mm Square Trimpot ® Trimming Potentiometer *RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specifi cations are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specifi c applications.

Electrical Characteristics

(see standard resistance table) (tighter tolerance available) (whichever is greater) Contact Resistance Variation 100 megohms min. Dielectric Strength Environmental Characteristics Power Rating (300 volts max. for Style G, J & H; 50 volts max. for Style R) Temperature Range ... -55 °C to +125 °C Temperature Coeffi cient ... ±100 ppm/°C 10 cycles, 240 hours TRS ±2 %; IR 10 megohms Load Life ....(@ 70 °C Rated Power 1000 Hours) TRS ±3 % TRS ±3 % TRS ±2 %; VRS ±1 % Physical Characteristics Pushover Strength (S & Z Style) resistance code and date code Standard Packaging Product Dimensions Standard Resistance Table Resistance Resistance (Ohms) Code 10 100 20 200 50 500 100 101 200 201 500 501 1,000 102 2,000 202 5,000 502 10,000 103 20,000 203 50,000 503 100,000 104 200,000 204 250,000 254 500,000 504 1,000,000 105 2,000,000 205 TOLERANCES: ± 0.25 EXCEPT WHERE NOTED (.010) DIMENSIONS: MM (INCHES) Popular distribution values listed in boldface. Special resistances available. *RoHS COMPLIANT

Specifi cations are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specifi c applications. 3314 - 4 mm Square Trimpot ® Trimming Potentiometer Product Dimensions 3 1 0.20 (.008) 3314H-1 0.80 (.031) 6.30 (.248) 5.00 ± 0.10 (.197 ± .004) 4.00 (.157) 4.50 (.177) 4.50 (.177) 2.55 (.100) 2.55 (.100) 2.55 (.100) TYP. TYP. 0.6 ± 0.1 (.024 ± .004) 3 PLCS. 5.00 (.197) 5.00 (.197) DIA. TYP. OUTSIDE WHEN PINS ARE PARALLEL 6.20 (.244) 5.00 (.197) 1.30 ± 0.10 (.051 ± .004) 0.80 ± 0.10 (.031 ± .004) 2 PLCS. 2.35 (.092) 3314R-1 5.00 (.197) 4.50 (.177) 3 1 2 6.20 (.244) 0.20 (.008) 0.51 ± 0.13 (.020 ± .005) TYP. TYP. R 0.13 (.005) 2.3 (.090) 1.3 (.051) 2 PLCS. 5.5 (.216) 2.0 (.079) 1.3 (.051) 2 PLCS. 3.2 (.126) THRU. 0.51 ± 0.13 (.020 ± .005) TYP. MAX. TYP. DIA. 2.55 (.100) RECOMMENDED PCB LAYOUT (J, G Styles) TAPE 3.5 ± 0.10 (.138 ± .004) 0.25 ± 0.10 (.010 ± .004) 5.52 ± 0.05 (.217 ± .002) DIA. 4.00 ± 0.10 (.157 ± .004) 2.00 ± 0.05 (.079 ± .002) 1.75 ± 0.10 (4.72 ± .012) 5.26 ± 0.10 (.207 ± .004) 6.48 ± 0.10 (.255 ± .004) 6 ° ± 2 ° DIA. (R Style) TAPE 177.8 ± 2.03 (7.00 ± .080) 13.0 ± 0.51 (.512 ± .020) DIA. 1.50 (.059) 20.2 (.795) 18.4 (.724) 50.00 (1.969) 12.4 + 2.01/ -.000 (MEASURED AT HUB) REEL 2.74 ± 0.10 (.108 ± .004) .30 (.012) 5.50 ± 0.5 (.217 ± .020) 4.00 ± 0.10 (.157 ± .004) 2.00 ± 0.05 (.079 ± .020) 8.00 ± 0.20 (.315 ± .008) 1.75 ± 0.10 (.069 ± .004) 12.00 ± 0.30 (.472 ± .012) 5.26 ± 0.10 (.207 ± .004) 5.26 ± 0.10 (.207 ± .004) 6.45 ± 0.10 (.254 ± .004) * Embossed Tape Designator "E" ** Embossed Tape Designator "G" (See How To Order chart for further information.) Meets EIA specification 481. MAX. DIA.* MIN. DIA. MIN. MAX. (MEASURED AT HUB) 330.2 ± 2.0 (G) (J) EQUAL SPACED 3 PLCS.MIN. 177.8 ± 2.03 (7.00 ± .080) 13.0 ± 0.51 (.512 ± .020) DIA. 1.50 (.059) 20.2 (.795) 18.4 (.724) 50.00 (1.969) 12.4 + 2.01/ -.000 (MEASURED AT HUB) REEL * Embossed Tape Designator "E" ** Embossed Tape Designator "G" (See How To Order chart for further information.) Meets EIA specification 481. DIA.* MIN. DIA. MIN. MAX. (MEASURED AT HUB) 330.2 ± 2.0 EQUAL SPACED 3 PLCS.MIN. DIA. DIA. Packaging Specifi cations - J, G and R Styles TOLERANCES: ± 0.25 EXCEPT WHERE NOTED (.010) DIMENSIONS: MM (INCHES) 1 3 CW CLOCKWISE CCW

2 WIPER

Specifi cations are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specifi c applications. 3314 - 4 mm Square Trimpot ® Trimming Potentiometer Product Dimensions ROTOR POSITIONED AS SHOWN WITHIN ± 22 ° OF CENTERLINE OF TERMINAL 2 ORIENTATION FEATURE ROTOR POSITIONED AS SHOWN WITHIN ± 22 ° OF CENTERLINE OF TERMINAL 2 ROTOR POSITIONED AS SHOWN WITHIN ± 22 ° OF CENTERLINE OF TERMINAL 2 ROTOR POSITIONED AS SHOWN WITHIN ± 22 ° OF CENTERLINE OF TERMINAL 2 1 2 3 3314S-1 (Bourns Marking, Straight Slot) 3314S Common Dimensions 1.42 (.056)REF. 0.61 (.024)5.01 (.197) 3.5 (0.138) 1.27 (0.05) 2.54 (0.10) 1.05 (0.041) 1.42 ± 0.13 (0.056 ± 0.005) 1.2 (0.047) 4.5 (0.177) 4.95 ± 0.13 (0.193 ± 0.005) 5.61 (0.221) 5.81 ± 0.13 (0.229 ± 0.005) 3.13 (0.123) 1.15 (0.045) 5.8 (.228) 1.75 (0.069) 1.75 (0.069) 1.6 (0.063) RECOMMENDED PCB LAYOUT 1.15 (0.045) 1.2 (0.047) 1.1 (0.043) 1 2 3 3314S-2 (Bourns Marking, Cross Slot) 1 2 3 3314S-4 (Reverse Marking, Cross Slot) 1 2 3 3314S-3 (Reverse Marking, Straight Slot) (S Style) 16.00 ± 0.3 (.630 ± 0.012) 1.5 + 0.1/-0.0 (0.59 +.004/-0.0) R TYP.0.5 (.020) DIA. MIN. DIA. 1.5 (.059) 12.00 ± 0.10 (.472 ± .004) 7.50 ± 0.10 (.295 ± .004) TAPE 1.75 ± 0.10 (.069 ± .004) 5.5 (.217) 8.3 (.327) 0.50 ± 0.05 (.020 ± .002) 0.50 (.020) 1.78 (0.70) 3.30 (0.130) 177.8 ± 2.03 (7.00 ± .080) 13.0 ± 0.51 (.512 ± .020) DIA. 1.50 (.059) 20.2 (.795) 22.4 (.882) 50.00 (1.969) 16.4 + 2.0/ -.000 (MEASURED AT HUB) REEL * Embossed Tape Designator "E" ** Embossed Tape Designator "G" (See How To Order chart for further information.) Meets EIA specification 481. DIA.* MIN. DIA. MIN. MAX. (MEASURED AT HUB) 330.2 ± 2.0 EQUAL SPACED 3 PLCS.MIN. 2.00 ± 0.10 (.079 ± .004) 4.00 ± 0.10 (.157 ± .004) 5.30 ± 0.10 (.209 ± .004) 7.30 (.287) Packaging Specifi cations TOLERANCES: ± 0.30 EXCEPT WHERE NOTED (.012) DIMENSIONS: MM (INCHES) 1 3 CW CLOCKWISE CCW

Specifi cations are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specifi c applications. 3314 - 4 mm Square Trimpot ® Trimming Potentiometer Product Dimensions Packaging Specifi cations ROTOR POSITIONED AS SHOWN WITHIN ± 22 ° OF CENTERLINE OF TERMINAL 2 ROTOR POSITIONED AS SHOWN WITHIN ± 22 ° OF CENTERLINE OF TERMINAL 2 1 2 3 2.54 (0.10) 1.27 (0.50) 1.19 (0.047) 1.29 (0.051) 0.61 (.024) 3.18 (.125) 5.01 (.197) 3.32 (0.131) 0.96 (.038) 5.56 (0.219) 2.54 (0.10) 1.3 (0.051) 3.48 (.137) 2.01 (.079) 2.01 (.079)2.01 (.079) RECOMMENDED PCB LAYOUT 0.26 (.010) 0.21 (.008) 5.76 (0.227) 3.08 (0.121) 3314Z-1-(RC) E (Cross Slot) ROTOR POSITIONED AS SHOWN WITHIN ± 22 ° OF CENTERLINE OF TERMINAL 2 1 2 3 3314Z-4-(RC) E (Reverse Marking, Cross Slot) 1 2 3 3314Z-GA4-(RC) E (Straight Slot) ROTOR POSITIONED AS SHOWN WITHIN ± 22 ° OF CENTERLINE OF TERMINAL 2 1 2 3 3314Z-3 (Reverse Marking, Straight Slot) 3314Z Common Dimensions 16.00 (.630) 1.50 + 0.10/-0.0 (0.59 +.004/-.0) DIA. MIN. DIA. 1.50 (.059) 12.00 (.472) 7.5 (.295) TAPE 1.75 (.069) 2.00 ± 0.10 (.079 ± .004) 5.50 ± 0.10 (.217 ± .004) 5.50 ± 0.10 (.217 ± .004) 4.00 ± 0.10 (.157 ± .004) 5 ° MAX. MAX.0.40 (.016) (Z Style) 177.8 ± 2.03 (7.00 ± .080) 13.0 ± 0.51 (.512 ± .020) DIA. 1.50 (.059) 20.2 (.795) 22.4 (.882) 50.00 (1.969) 16.4 + 2.0/ -.000 (MEASURED AT HUB) REEL * Embossed Tape Designator "E" ** Embossed Tape Designator "G" (See How To Order chart for further information.) Meets EIA specification 481. DIA.* MIN. DIA. MIN. MAX. (MEASURED AT HUB) 330.2 ± 2.0 5.59 ± 0.10 (.220 ± .004) EQUAL SPACED 3 PLCS.MIN. TOLERANCES: ± 0.25 EXCEPT WHERE NOTED (.010) DIMENSIONS: MM (INCHES) 1 3 CW CLOCKWISE CCW REV. 05/13

Click to View Pricing, Inventory, Delivery & Lifecycle Information: Bourns: 3314H-1-104 3314H-1-101 3314H-1-105 3314H-1-102 3314H-1-103 3314J-1-754E 3314H-1-504 3314H-1-501 3314H-1-500 3314H-1-503 3314H-1-502 3314G-1-254E 3314Z-GA4-203E 3314Z-GA4-205E 3314Z-GA4-201E 3314Z-GA4-103E 3314Z-GA4-101E 3314G-1-504E 3314G-2-503E 3314J-2-503G 3314R-2-503G 3314J-2-501E 3314J-2-503E 3314G-2-501E 3314R-2-503E 3314J-2-253E 3314J-2-502E 3314J-2-500E 3314G-2-504E 3314G-2- 502E 3314J-2-504G 3314G-2-500E 3314J-2-504E 3314J-1-223E 3314G-1-504G 3314J-1-504E 3314R-1-502E 3314Z-1-502G 3314J-1-502E 3314J-1-502G 3314Z-1-502E 3314J-1-500E 3314J-1-504G 3314Z-1-504E 3314G-1- 500E 3314S-1-502E 3314R-1-500E 3314R-1-504E 3314G-1-502E 3314Z-1-500E 3314J-1-503E 3314Z-1-503G 3314J-1-503G 3314Z-1-503E 3314R-1-503E 3314G-1-205E 3314J-1-201G 3314Z-1-201E 3314J-1-201E 3314S-1- 201E 3314R-1-201E 3314Z-1-205E 3314G-1-201E 3314G-1-201G 3314J-1-205E 3314J-1-104E 3314G-1-100E 3314S-1-104E 3314J-1-100E 3314R-1-104E 3314J-1-104G 3314Z-1-104E 3314G-1-104E 3314G-1-104G 3314Z-1- 100E 3314H-1-202 3314H-1-204 3314H-1-203 3314H-1-201 3314Z-10-201E 3314Z-10-500E 3314G-1-203G 3314J-3-102E 3314J-3-201E 3314J-3-202E 3314J-3-502E 3314R-1-223E 3314R-2-502E 3314S-1-100E 3314S-1- 105E 3314S-1-200E 3314S-1-204E 3314S-1-205E 3314S-1-254E 3314S-1-500E 3314S-1-504E 3314S-2-100E 3314S-2-101E 3314S-2-102E 3314S-2-103E