330-8674-020

121583-0000 ITT | Alldatasheet

Document overview

• Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

www.ittcannon.com Dimensions shown in mm Specifications and dimensions subject to change Cannon APD / DIN 72585 Connectors Technical Data, 37-way* Electrical Data Voltage 48 VDC max. Current Carrying Capacity: max. 12 A at 85°C / 105 °C short time, for wire size 1,5 mmΩ(for a limited no. of contacts) max. 2 A at 120°C or 5 A, for wire size 1,5 mmΩ (for a limited no. of contacts) Contact Resistance Initially: max. 5 mΩ After climatic tests: max 10 MΩ Test Voltage

1.000 VAC

1.000 MΩ Mechanical Data Sealing acc. to IEC 60529 and DIN 40050 IP 67: 0,1 bar / 30 minutes IP 69K. Jet water 85°C Operating Temperature Range -40°C / 125°C Shock 50g / 11ms half sine IEC 60512 Vibration Sine wave 70-2.000 Hz, 18/20g 100 hours / axis, 50% of test time at 120°C (test conditions) DIN 72585 Durability

20 Mating cycles

close: max 4 Nm open: min 1 Nm; max 4 Nm Contact Retention Force min 80 N Mechanical Robustness Static, lateral load: 150N / 10s Dynamic impact, ball drop 2 Joules, Cable drop 1m height EN ISO 8092 Humidity, cyclic: Industrial Atmosphere Condensed water / SO2; 3 cycles Standards and Specifications (in accordance with DIN 72585) Environmental Resistance against Fluids: Diesel DIN EN 590 Diesel + test fuel FAM2 Motor oil SAE30 Motor oil DIN 51 5111 Gearbox oil, different types e.g. SAE 80W90 Brake Fluid DIN ISO 4925 Cleaning agent Salt Spray Test: 48h DIN 50021 Materials Connector housing PA66 O-Ring FKM Contacts Copper alloy, tinned, gold-plated Coupling nut PA * Contact layout is not specified by DIN 72585 APD 37-way is a highly reliable, cost effective multi-pin connector with signal contacts (multi-layout power / signal on demand). It offers wire to wire and wire to board connection solutions. According to DIN 72585, the connector is dedicated for harsh environmental usage. Various customer specific designs (e.g. different coding) are possible.

www.ittcannon.com Dimensions shown in mm Specifications and dimensions subject to change Cannon APD / DIN 72585 Connectors Plug, 37-way 37-way Order No. Designation Code Color 121583-0058 APD-1BS37 black (RAL 9005) Socket Crimp-Contacts, Individual wire-seal, Wire filler, Flange gasket, see page 27. Accessories, see page 41 and 42. View on Mating Face Note: Additional coding on demand. Packaging unit 100 pcs. Coding 37-way layout ø50.8 ø49.4 34.2 Derating Curve For a single contact under load. 1. Cable Size: 1,5 mm2 2. Cable Size: 0,75 mm2 3. Cable Size: 0,35 mm2

www.ittcannon.com Dimensions shown in mm Specifications and dimensions subject to change Cannon APD / DIN 72585 Connectors Flange Receptacle, 37-way ø40 ø44.3 Flange Receptacle, 37-way Order No. Designation Code Color 249-8619-017 APD-1AP37 black (RAL 9005) Pin Crimp-Contacts, Individual wire-seal, Wire filler, Flange gasket, see page 27. Accessories, see page 41 and 42. View on Mating Face Note: Additional coding on demand. Packaging unit 100 pcs. Coding 37-way layout Panel Cut Out Flange for all Flange Receptacles ø40 ø44.3 37±0.1 41.5±0.05 ø34.5

www.ittcannon.com Dimensions shown in mm Specifications and dimensions subject to change Cannon APD / DIN 72585 Connectors 37-/ 51-way Contacts 1,2 - 1,6 mm Red 10RD3940 273-8506-010 1,4 - 2,0 mm Grey 10GR3940 273-8506-008 1,9 - 2,1 mm Yellow 10YE3940 273-8506-009 1,4 - 2,0 mm White 10WH3940 273-8506-011 Dust cap for APD 37-way (plug) 025-8636-037 Dust cap for APD 37-way (receptacle) 025-8636-053 Socket Contacts Contacts (stamped & formed) Plating Crimp Range Designation Part Number 0,35 - 0,75 mm2 APK-SA16A07-002-C 121668-0220 0,75 - 1,50 mm2 APK-SA16A15-002-C 121668-0222 0,35 - 0,75 mm2 APK-SA16G07-002-C 121668-0266 0,75 - 1,50 mm2 APK-SA16G15-002-C 121668-0268 0,35 - 0,75 mm2 APK-PA16A07-002-C 121668-0254 0,75 - 1,50 mm2 APK-PA16A15-002-C 121668-0255 0,35 - 0,75 mm2 APK-PA16G07-002-C 121668-0265 0,75 - 1,50 mm2 APK-PA16G15-002-C 121668-0267 0,30 - 0,60 mm2 APK-PA16A06-E 330-8674-020 0,50 - 1,00 mm2 APK-PA16G10-E 330-8674-025 0,35 - 0,75 mm2 APK-SA16A07-002 121668-0221 0,75 - 1,50 mm2 APK-SA16A15-002 121668-0202 0,35 - 0,75 mm2 APK-SA16G07-002 121668-0270 0,75 - 1,50 mm2 APK-SA16G15-002 121668-0272 0,35 - 0,75 mm2 APK-PA16A07-002 121668-0252 0,75 - 1,50 mm2 APK-PA16A15-002 121668-0253 0,35 - 0,75 mm2 APK-PA16G07-002 121668-0269 0,75 - 1,50 mm2 APK-PA16G15-002 121668-0271 tin gold (0,8 µm) tin gold (0,8 µm) tin gold (0,8 µm) tin gold (0,8 µm) tin gold (0,8 µm) Pin Contacts Pin Contacts Socket Contacts Pin Contacts Press-In Contacts (machined) Contacts (stamped & formed) For APD 51-way Secondary Lock Version For APD 37-way and 51-way Standard Version

Description

• Low contact resistance (max. 5mΩ) for maximum signal integrity
• Current carrying capacity: 12A max.
• Press-in contacts for PCB mounting
• Plating with special material available by request
• Machined press-in contacts. (other machined contacts available by request)