32K601-271L5 ROSENBERGER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
SMA BULKHEAD JACK 32K601-271L5 Rosenberger Hochfrequenztechnik GmbH & Co. KG Tel.: +49 8684 18-0 Page P.O.Box 1260 D-84526 Tittmoning Germany www.rosenberger.de email: info@rosenberger.de 1 / 2 RF_35/12.04/3.0 All dimensions are in mm; tolerances according to ISO 2768 m-H Interface According to IEC 60169-15; EN 122110; MIL-STD-348 Documents Assembly instruction 32 A4 or 32 A21 Panel piercing B 56 Material and plating Connector parts Material Plating Center contact CuBe AuroDur®, gold plated Outer contact CuBe or equiv. AuroDur®, gold plated Dielectric PTFE Gasket Silicone
SMA BULKHEAD JACK 32K601-271L5 Rosenberger Hochfrequenztechnik GmbH & Co. KG Tel.: +49 8684 18-0 Page P.O.Box 1260 D-84526 Tittmoning Germany www.rosenberger.de email: info@rosenberger.de 2 / 2 RF_35/12.04/3.0 f(GHz) Electrical data Impedance 50 Ω Frequency DC to 18 GHz VSWR ≥ 30 dB @ DC to 8 GHz ≥ 25 dB @ 8 to 12 GHz ≥ 19 dB @ 12 to 18 GHz Insertion loss ≤ 0.03 x dB Insulation resistance ≥ 5 x10 3 MΩ Center contact resistance ≤ 3 m Ω Outer contact resistance ≤ 2 m Ω Test voltage 1000 V rms Working voltage 480 V rms Power handling (at 20 °C, sea level, VSWR 1.0) ≤ 200 W @ 2 GHz RF-leakage ≥ 100 dB up to 1 GHz - Limitations are possible due to the used cable type - Mechanical data Mating cycles min. 500 Coupling test torque max. 1.7 Nm Recommended torque 0.8 Nm to 1.1 Nm Environmental data Temperature range -65°C to +165°C Thermal shock MIL-STD-202, Meth. 107, Cond. B Corrosion MIL-STD-202, Meth. 101, Cond. B Vibration MIL-STD-202, Meth. 204, Cond. D Shock MIL-STD-202, Meth. 213, Cond. I Moisture resistance MIL-STD-202, Meth. 106 RoHS compliant Tooling N/A Suitable cables UT 85, RG 405 Weight Weight 4.50 g/pce Draft Date Approved Date Rev. Engineering change n umber Name Date While the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warr anty on our part and no statement herein shall be construed as recommend ation to infringe existing patents. In the effort t o improve our products, we reserve the right to make changes judged to be necessary.