32DS122-K00L5 ROSENBERGER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Rosenberger Hochfrequenztechnik GmbH & Co. KG P.O.Box 1260 D-84526 Tittmoning Germany www.rosenberger.de Tel. : +49 8684 18-0 Email : info@rosenberger.de Page RF_35/05.10/6.0 Dieses Dokument ist urheberre chtlich geschützt ● This document is protected by copyright ● Rosenberger Hochfrequenztechnik GmbH & Co. KG All dimensions are in mm; tolerances according to ISO 2768 m-H Interface According to IEC 60169-15, EN 122110, MIL-STD-348 Documents N/A Material and plating Connector parts Material Plating Center contact CuBe AuroDur®, gold plated Outer contact Brass AuroDur®, gold plated Dielectric PTFE Coupling nut Stainless steel Passivated Gasket Silicone
Rosenberger Hochfrequenztechnik GmbH & Co. KG P.O.Box 1260 D-84526 Tittmoning Germany www.rosenberger.de Tel. : +49 8684 18-0 Email : info@rosenberger.de Page RF_35/05.10/6.0 Dieses Dokument ist urheberre chtlich geschützt ● This document is protected by copyright ● Rosenberger Hochfrequenztechnik GmbH & Co. KG Electrical data Impedance 50 Ω Frequency 9 KHz to 8 GHz Return loss ≥ 25 dB, 9 KHz to 1 GHz ≥ 18 dB, 1 GHz to 4 GHz ≥ 15 dB, 4 GHz to 8 GHz Insertion loss ≤ 1.10 dB, 9 KHz to 8 GHz Insulation resistance ≥ 5 G Ω Center contact resistance ≤ 3.0 m Ω Outer contact resistance ≤ 2.0 m Ω Working voltage 50 Vdc max. Capacity 2.25 µF Block type Center contact only Mechanical data Mating cycles ≥ 500 Coupling nut retention ≥ 180 N Center contact captivation: axial ≥ 20 N radial ≥ 1 Ncm Coupling test torque 1.70 Nm Recommended torque 0.80 Nm to 1.10 Nm Environmental data Temperature range -45 °C to +85 °C Thermal shock MIL-STD-202, Method 107, Condition B Corrosion MIL-STD-202, Method 101, Condition B Vibration MIL-STD-202, Method 204, Condition D Shock MIL-STD-202, Method 213, Condition I Moisture resistance MIL-STD-202, Method 106 RoHS compliant Tooling N/A Suitable cables N/A Weight Weight 16.6 g/pce Draft Date Approved Date Rev. Engineering change n umber Name Date Martin Moder 15/10/10 J_Krautenbacher 15.07.16 d00 15-1629 I_Wallner 15.07.16 While the information has been carefully compiled to the best of our knowledge, nothing is intended as repre sentation or warranty on our part and no statement herein shall be construed as recommendation to infringe existing patents. In the effort to improve our products, we reserve the right to make changes judged to be necessary.