323-0801-8 40

U.FL HIROSE | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 12

Technical content

U.FL Series 2018.6ᶆ 1.9 (MAX 2.0) 2.3 (MAX 2.4) 2.4 (MAX 2.5) 3 (MAX 3.2) U.FL-LP(V)-040HF U.FL-LP-062HF U.FL-LP-088HF U.FL-LP-040HF U.FL-LP-066HF U.FL-LP-068HF E.FL-LP-040 E.FL-LP-066 U.FL E.FL Plug Plug Plug Plug Plug Dia 0.81 Dia 0.81 Dia 0.95 Dia 1.37 Dia 1.32 Dia 1.13 U.FL-LP-040HF U.FL-LP-066HF U.FL-LP-068HF U.FL-R-SMT-1 U.FL-R-SMT-1 U.FL-R-SMT-1 U.FL-R-SMT-1 U.FL-R-SMT-1 U.FL-LP(V)-040HF U.FL-LP-062HF U.FL-LP-088HF ■Features 1. Nominal mated height of 1.9 or 2.3mm, 2.4mm 2. Small mounting area The receptacle occupies an area of 7.7mm2. 3. Light weight Receptacle : 15.7mg 4. Supports high frequency up to 6GHz To meet the frequency requirements of a wide variety of miniature devices, the connectors offer high frequency performance from DC to 6GHz, with 5. Automatic board placement Packaged on tape-and-reel the receptacles can be placed with vacuum nozzles of the automatic placement equipment. 6. Plugs are terminated with ultra-fine coaxial (fluorinated resin insulated) cable Standard ultra-fine coaxial cable of 0.81mm diameter (single braid shielding) is used for the plug termination, assuring secure and stable connections. 7. Simple connector mating / unmating Use of available extraction tool assures correct disconnection of the plug and receptacle. 8. Verification of the fully mated condition Tactile click sensation confirms fully mated condition, assuring complete electrical and mechanical connection. 9. Halogen-free*(Receptacle,plug(HF type)) *As defined by IEC61249-2-21 Br-900 ppm maximum, Cl-900 ppm maximum, Cl+Br combined-1,500 ppm maximum Mated height comparison (with E.FL series)

• Space Factor of Mated Connector Up to 6GHz Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height Fig.1 Fig.2 In cases where the application will demand a high level of reliability, such as automotive, please contact a company representative for further information.

U.FL Series●Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height Note 1 : Cable type connectors were measured with SMA conversion adapters attached to both ends of the harness product of a suitable 100cm cable. Note 2 : Board type connectors were mounted to a 50 ø glass epoxy board and measurements were conducted with SMA conversion adapters attached. ■Product Specifications Ratings Nominal characteristic impedance Frequency range 50ø DC to 6GHz Operating temperature range Operating humidity -40˚C to +90˚C 90%RH max. Storage temperature range Storage humidity -30˚C to +70˚C 90%RH max. Item Specification Conditions 1. Contact resistance Center : 20mø max. Outer : 10mø max. 10mA max. 2. Insulation resistance 500Mø min. 100V DC 3. Withstanding voltage No flashover or insulation breakdown. 200V AC / 1 minute Part No. Up to 3GHz 3 to 6GHz 5. Durability (mating / un-mating, with corresponding plug) Contact resistance Center : 25mø max. Outer : 15mø max. 30 cycles 6. Vibration No electrical discontinuity of 1µs min. No damage, cracks or parts dislocation. Frequency : 10 to 100Hz, single amplitude of 1.5mm, acceleration of 59m/s2, for 5 cycles in the direction of each of the 3 axis. 7. Shock Acceleration of 735m/s 2, 11ms duration, sine half- wave waveform, 3 cycles in each of 3 axes. 8. Humidity (Steady state) No damage, cracks or parts dislocation. Insulation resistance 10Mø min.(humidity high) Insulation resistance 500Mø min.(dry) 96 hours at temperature of 40ç and humidity of 95%. 9. Temperature cycle No damage, cracks or parts dislocation. Contact resistance : 25mø max. (Center) 15mø max. (Outer) Temperature : -40˚C/+5 to +35˚C/+90˚C/+5 to +35˚C Time : 30min. / 3min. / 30min. / 3min. 5 cycles 10. Salt spray No excessive corrosion 5% salt water solution, 48 hours *V.S.W.R. Measurement System ■Material / Finish

• Plug-right angle Part Material Finish/Remarks Shell Phosphor bronze Silver plated Insulator PBT, Color : Gray UL94HB (LP (V) -040HF) LCP, Color : Milky-white UL94V-0(040HF,066HF, 068HF, 062HF, 088HF) Female center contact Phosphor bronze Gold plated
• Receptacle Part Material Finish/Remarks Shell Phosphor bronze Silver plated Insulator LCP, Color : Milky-white UL94V-0 Male center contact Brass Gold plated

U.FL Series●Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height ■Receptacles GND GND SIG 2.6 0.6 1.25 0.35 1.2Max(Note) (3.1) 2.6 1.8 GND GND U.FL-R-SMT-1 SIG 1.05±0.05 1±0.05 1±0.05 2.2±0.05 4±0.05 1.9±0.05 No conductive traces in this area B Recommended PCB Mounting Pattern Part No. HRS No. Packaging Weight / EA U.FL-R-SMT-1(01) 331-0472-2 01 100 pcs/pack 15.7/mgU.FL-R-SMT-1(60) 331-0472-2 60 4,000 pcs/reel U.FL-R-SMT-1(80) 331-0472-2 80 10,000 pcs/reel Note : This area may be covered by insulating material. Embossed Carrier Tape Dimensions(IEC 60286-3 compliant) Embossed Carrier Tape Dimensions U.FL-R-SMT-1(60): 8mm pitch U.FL-R-SMT-1(80): 4mm pitch Reel Dimensions Ø1.5 1.755.5 Center contact Ø1.5 5.5 1.75 2 4 Center contact Unreeling direction П330 13.5 П13 П21 A MaterialɿPS(Black) A(SCALE FREE)

U.FL Series●Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height ■Cable Assembly (Plug)

• Cable Guide Dia.0.81mm Coaxial Cable 7/0.05 SA (AWG#36) Dia.0.4mm FEP Single Shield TA Dia.0.81mm FEP 5.4dB/m 8.0dB/m Dia.1.13mm Coaxial Cable 068 7/0.08 SA (AWG#32) Dia.0.68mm FEP Single Shield TA Dia.1.13mm FEP 3.73dB/m 5.44dB/m Dia.1.32mm Coaxial Cable 066 7/0.08 SA (AWG#32) Dia.0.66mm FEP Double Shield TA Dia.1.32mm FEP 3.8dB/m 5.6dB/m Dia.0.95mm Coaxial Cable 062 7/0.071 SA (AWG#33) Dia.0.62mm FEP Tape, single Shield TA Dia.0.95mm FEP 3.1dB/m 4.4dB/m Dia.1.37mm Coaxial Cable Dia.1.37mm Coaxial Cable (data as provided by cable suppliers, for reference only) * SA : Silver plated annealed copper wire, TA : Tin plated annealed copper wire 088 088 7/0.102 SA (AWG#30) 7/0.102 SA (AWG#30) Dia.0.88mm FEP Dia.0.88mm FEP/PTEE Single Shield TA Tape, Single Shield TA Dia.1.37mm FEP Dia.1.37mm FEP 2.8dB/m 2.5dB/m 4.3dB/m 3.4dB/m

Description

Conductor* Dielectric Diameter Outer Conductor* Jacket Diameter Flame Retardant Grade Nominal attenuation At 3GHz 31.85 3.4 2.81.5 2.81.8 1.93 31.93 [Plugs can be ordered only as terminated cable assemblies.] Part No. Size U.FL-LP-040HF U.FL-LP-066HF U.FL-LP-068HF U.FL-LP(V)-040HF(06) U.FL-LP-062HF(06) U.FL-LP-088HF(06) Mated Height 2.5mm Max. (2.4mm Nom.) 2.5mm Max. (2.4mm Nom.) 2.0mm Max. (1.9mm Nom.) 2.4mm Max. (2.3mm Nom.) 2.4mm Max. (2.3mm Nom.) Applicable cable Dia. 0.81mm Dia. 1.13mm and Dia. 1.32mm Weight (mg) 54 59 35 45.5 72 Environmental compliant Halogen-free, RoHS2 compliant VW-1 At 6GHz

U.FL Series●Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height How To Specify Cable Assembly [Double-ended cable assembly] [Single-ended cable assembly] U.FL

• Product Number Structure
• Standard tolerances for (L) L L

Ordering information

L ʮʯ -- - - ADouble- Ended U.FL LP HF6 04N TV L ʮʯ -- - - ASingle- Ended Used plug : U.FL-LP(V)-040HF(06) U.FL-LP-040HF(Dia.0.81mm) U.FL 2LP HF6 068N T L ʮʯ -- - - ADouble- Ended U.FL LP HF6 068N T L ʮʯ -- - - ASingle- Ended Used plug : U.FL-LP-068HF(Dia.1.13mm) U.FL 2LP HF6 066N L ʮʯ --- - ADouble- Ended U.FL LP HF6 066N L ʮʯ --- - ASingle- Ended Used plug : U.FL-LP-066HF(Dia.1.32mm) U.FL 2LP HF6 062N D L ʮʯ -- - - ADouble- Ended U.FL LP HF6 062N D L ʮʯ -- - - ASingle- Ended Used plug : U.FL-LP-062HF(06)(Dia.0.95mm) U.FL 2LP HF6 088N T L ʮʯ -- - - ADouble- Ended U.FL LP HF6 088N T L ʮʯ -- - - ASingle- Ended Used plug : U.FL-LP-088HF(06)(Dia.1.37mm) q Series name U.FL, UFL w Assembly type LP : Single ended LPV : Plug(V) Single ended 2, 2LP : Double ended 2LPV plug(V) Double ended e Environmental compliant HF6 : Halogen-free r Cable type 04N : Dia.0.81mm Ultra-fine coaxial cable t Cable color 1 : White, 2 : Black y Cable outer conductor TV : Tin plated braided wire u Total length(mm) Length(L) q Series name U.FL, UFL w Assembly type LP : Single ended 2, 2LP : Double ended e Environmental compliant HF6 : Halogen-free r Cable type 068Y : Dia.1.13mm Ultra-fine coaxial cable068N : t Cable color 1 : Gray, 2 : Black y Cable outer conductor T : Tin plated braided wire u Total length(mm) Length(L) q Series name U.FL, UFL w Assembly type LP : Single ended 2, 2LP : Double ended e Environmental compliant HF6 : Halogen-free r Cable type 066N : Dia.1.32mm Ultra-fine coaxial cable t Cable color 1 : Gray, 2 : Black y Total length(mm) Length(L) q Series name U.FL, UFL w Assembly type LP : Single ended 2, 2LP : Double ended e Environmental compliant HF6 : Halogen-free r Cable type 062N : Dia.0.95mm Ultra-fine coaxial cable t Cable color 1 : Gray, 2 : Black y Cable outer conductor D : Copper tape + Tin plated braided wire u Total length(mm) Length(L) q Series name U.FL, UFL w Assembly type LP : Single ended 2, 2LP : Double ended e Environmental compliant HF6 : Halogen-free r Cable type 088Y : Dia.1.37mm Ultra-fine coaxial cable088N : t Cable color 1 : Gray, 2 : Black y Cable outer conductor T : Tin plated braided wire PD : Copper tape + Tin plated braided wire u Total length(mm) Length(L) (L)(mm) Standard Tolera(mm) *L=35 to 200 ±4 L=200 to 500 ±8 L=500 to 1000 ±12 L=Longer than 1000 ±1.5% of (L) Note : Minimum available length(L) is 35mm

U.FL Series●Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height ■Conversion Adapters

• SMA Conversion Adapter (Mating portion: U.FL side jack - SMA side plug) Note : The U.FL side mating portions has a lower lock retention force than the regular product, therefore, cannot be used for purposes other than performance measurements. ■Receptacle to Inspection This receptacle is used for inspecting the continuity, withstand voltage, and other aspects of the harness product. Note : Part No. U.FL-LP-N-2 for U.FL-LP-040HF/066HF/088HF/068HF. Plug Extraction Tool This tool is used for extraction from a mating condition. Plug Insertion Tool This tool is for mating U.FL series plug into receptacle.
• SMA Conversion Adapter (Mating portion: U.FL side plug - SMA side jack) Note : The U.FL side mating portions has a lower lock retention force than the regular product, therefore, cannot be used for purposes other than performance measurements.
• SMA Conversion Adapter (Mating portion: U.FL side plug - SMA side jack) Note : This connector is used by compressing the mated portion of U.FL side onto the U.FL-R-SMT -1 portion. (10.7) 8HEX 14.05 Ø6.35 1/4-36UNS-2A 6 5.6 (4.05) (18.6) 1/4-36UNS-2A 6 5.5(4) 12.9 5 7HEX M5∞0.5 (7.9) (4.4) U.FL MARKING U.FL U.FL/V Ø15 (90) 52.1 (12.9) JAPAN For distinction with W.FL-LP-IN. 8 Ø10 Part No. HRS No. HRMP-U.FLJ(40) 311-0300-2 40 Part No. HRS No. HRMJ-U.FLP(40) 311-0301-5 40 Part No. HRS No. HRMJ-U.FLP-ST1(40) 311-0385-5 40 Part No. HRS No. Part No. HRS No. U.FL-LP-N-2 331-0494-5 U.FL-LP(V)-N-2 331-0493-2 Part No. HRS No. U.FL-LP-IN 331-0334-9

U.FL Series●Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height Usage Precautions 1. Plugs (1) Mating / unmating (2) Pull forces on the cable after connectors are mated. (3) Precautions 1) To disconnect connectors, insert the end portion of U.FL-LP-N-2 and U.FL-LP(V)-N-2 under the connector flanges and pull off vertically, in the direction of the connector mating axis. 2) To mate the connectors, the mating axes of both connectors must be aligned and the connectors can be mated. The "click" will confirm fully mated connection.Do not attempt to insert on an extreme angle. After the connectors are mating, do not apply a load to the cable in excess of the values indicated in the diagram below. Do NOT forcefully twist or deform wires. (1) Recommended reflow temperature profile (3) Recommended metal mask thickness (4) Reflow cycles 0.1 to 0.12mm 2 times (2) Recommended manual soldering 2. Receptacles q The temperature of the printed circuit board surface temperature at the points of contact with the terminals. w Reflow soldering should be performed at a printed circuit surface temperature of 250°C max. e In individual applications the actual temperature may vary, depending on the solder paste type, volume / thickness and board size / thickness. Consuly your solder paste and equipment manufacturer for specific recommendations. (1) Operating environment The connectors are not designed to operate in the following environments :  Exposed to a excessive amounts of fine particles and dust  Regions and places having a high density of sulfur dioxide, hydrogen sulfide, nitrogen dioxide or other corrosive gasses.  Environments having large rapid variations in temperature. (2) Storage conditions - Receptacle Store in the Hirose Electric packaging. Temperature : -10 to +40ç, Humidity : 85% max. Use within 6 months of delivery. Receptacles for which the storage period has elapsed must be tested for solderability to the PC board mounting surface. 3. Operating environment and storage conditions Extraction Tool U.FL-R-SMT-1 U.FL Cable Assembly 100 120 140 160 180 200 220 240 260 [ç] Preheat (130 to 180ç) 230ç 220ç 50 seconds max. 120 seconds max. 60 seconds max. Time 250 ç max. for 10 seconds 1N max (U.FL-LP(V)-040HF, U.FL-LP-062HF) 2N max (U.FL-LP-040HF, U.FL-LP-066HF, U.FL-LP-068HF, U.FL-LP-088HF) 1N max (U.FL-LP(V)-040HF, U.FL-LP-062HF) 2N max (U.FL-LP-040HF, U.FL-LP-066HF, U.FL-LP-068HF, U.FL-LP-088HF) 3N max (U.FL-LP(V)-040HF, U.FL-LP-062HF) 4N max (U.FL-LP-040HF, U.FL-LP-066HF, U.FL-LP-068HF, U.FL-LP-088HF) U.FL-LP Cable Assembly U.FL-R-SMT-1 Manual soldering : 350˚C for 5 seconds

U.FL Series●Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height 1/4-36UNS-2A 8HEX 4.5 8 ■SMA cable type SMA Straight Plug Straight Jack Panel mount Jack (Four Screws) Panel mount Jack (Two Screws) Panel mount Jack (Bulkhead) 8HEX 1/4-36UNS-2B 4∞Ø2.6 12.7 8.649.55 1.7 1/4-36UNS-2A Ø6.4 8HEX 5.85 5.9 +0.1 Ø6.4 +0.1 111.5 Ø10 1/4-36UNS-2A Part No. HRS No. Applicable cable HRM-200-040PBN(40) 323-0790-3 40 Dia. 0.81 type HRM-200-066PBN(40) 323-0791-6 40 Dia. 1.13, Dia.1.32 type HRM-200-088PBN(40) 323-0800-5 40 Dia. 1.37 type Part No. HRS No. Applicable cable HRM-200-040JBN(40) 323-0792-9 40 Dia. 0.81 type HRM-200-066JBN(40) 323-0793-1 40 Dia. 1.13, Dia.1.32 type HRM-200-088JBN(40) 323-0801-8 40 Dia. 1.37 type Part No. HRS No. Applicable cable HRM-200-040PJ4BN(40) 323-0795-7 40 Dia. 0.81 type HRM-200-066PJ4BN(40) 323-0796-0 40 Dia. 1.13, Dia.1.32 type HRM-200-088PJ4BN(40) 323-0803-3 40 Dia. 1.37 type 89.55 1.7 1/4-36UNS-2A Ø6.4 2ʷØ2.6 Part No. HRS No. Applicable cable HRM-200-040PJ2BN(40) 323-0794-4 40 Dia. 0.81 type HRM-200-066PJ2BN(40) 323-0788-1 40 Dia. 1.13, Dia.1.32 type HRM-200-088PJ2BN(40) 323-0802-0 40 Dia. 1.37 type Part No. HRS No. Applicable cable HRM-200-040BPJBN(40) 323-0797-2 40 Dia. 0.81 type HRM-200-066BPJBN(40) 323-0798-5 40 Dia. 1.13, Dia.1.32 type HRM-200-088BPJBN(40) 323-0804-6 40 Dia. 1.37 type

U.FL Series●Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height Reverse polarity SMA Straight Jack Panel mount Jack (Four Screws) Panel mount Jack (Two Screws) Panel mount Jack (Bulkhead) Part No. HRS No. Applicable cable SMA(R)-200-040JBN 323-0926-3 Dia. 0.81 type SMA(R)-200-066JBN 323-0931-3 Dia. 1.13, Dia.1.32 type SMA(R)-200-088JBN 323-0904-0 Dia. 1.37 type Part No. HRS No. Applicable cable SMA(R)-200-040BPJBN 323-0927-6 Dia. 0.81 type SMA(R)-200-066BPJBN 323-0902-5 Dia. 1.13, Dia.1.32 type SMA(R)-200-088BPJBN 323-0901-2 Dia. 1.37 type 4.5 8 1/4-36UNS-2A

8 HEX

Part No. HRS No. Applicable cable SMA(R)-200-040PJ4BN 323-0928-9 Dia. 0.81 type SMA(R)-200-066PJ4BN 323-0932-6 Dia. 1.13, Dia.1.32 type SMA(R)-200-088PJ4BN 323-0934-1 Dia. 1.37 type 1/4-36UNS-2A 1.7 9.55 8.64 12.7 4∞Ø2.6 Part No. HRS No. Applicable cable SMA(R)-200-040PJ2BN 323-0929-1 Dia. 0.81 type SMA(R)-200-066PJ2BN 323-0933-9 Dia. 1.13, Dia.1.32 type SMA(R)-200-088PJ2BN 323-0935-4 Dia. 1.37 type 1/4-36UNS-2A 1.7 9.55 8 12.2 2∞Ø2.6 +0.1 05.9 +0.1 0 Ø6.4 ˔Panel cut-out 1/4-36UNS-2A 17 8 HEX 1.5 11 5.85 Ø10

U.FL Series●Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height L mm L mm L mm L mm L mm Note : Minimum available length(L) is 50mm P : Plug J : Jack PJ : Panel mount Jack (Four Screws) PJ2 : Panel mount Jack (Two Screws) BPJ : Panel mount Jack (Bulkhead) ■How To Specify Cable Assembly HRM q P w e ʮ˞ʯ2ʮ˞ʯ r L t -- - - AUFLHF6 q Series name HRM : SMA type SMAR : Reverse polarity SMA w Connector type P : Plug J : Jack PJ : Panel mount Jack(Four screws) PJ2 : Panel mount Jack(Two screws) BPJ : Panel mount Jack(Bulkhead) e Cable type 04 : Dia. 0.81mm Coaxial cable 066 : Dia. 1.32mm Coaxial cable 068 : Dia. 1.13mm Coaxial cable 088 : Dia. 1.37mm Coaxial cable r Cable color 04 2 : Black 066 068 088 2 : Black t Total length(mm) Length(L)

U.FL Series●Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height 4∞Ø2.6 17.9 9.55 12.7 8.64 1.7 1/4-36UNS-2A 17.9 9.55 1.7 1/4-36UNS-2A 12.2 2∞Ø2.6 17.9 8 HEX 11 5.851.5 1/4-36UNS-2A Ø10 5.9+0.1 Ø6.4 +0.1 0 ˔Panel cut-out 1/4-36UNS-2A 5.08 12.7 9.7 6.4 5.08±0.05 4∞Ø1.5 +0.1 0 5.08±0.05 ˔Panel cut-out ■SMA conversion adapter SMA Panel mount adapter (Four Screws) Panel mount adapter (Two Screws) Panel mount adapter (Bulkhead) PCB mount adapter Part No. HRS No. HRMJ-U.FLJ-PA4 311-0465-2 Part No. HRS No. HRMJ-U.FLJ-PA2 311-0467-8 Part No. HRS No. HRMJ-U.FLJ-BPA-4 311-0463-7 Part No. HRS No. Finish HRMJ-U.FLJ-PC 311-0411-3 Nickel plated HRMJ-U.FLJ-PC(01) 311-0411-3 01 Gold plated

U.FL Series●Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height 17.9 1/4-36UNS-2A 12.7 9.55 8.64 1.7 4∞Ø2.6 2∞Ø2.6 17.9 1/4-36UNS-2A 9.55 1.7 12.2 17.9 1/4-36UNS-2A 9.551.5 5.85 5.9+0.1 Ø6.4 +0.1 Ø10 ˔Mounting pattern Reverse polarity SMA Panel mount adapter (Four Screws) Panel mount adapter (Two Screws) Panel mount adapter (Bulkhead) Part No. HRS No. SMA(R)J-U.FLJ-PA4 311-0466-5 Part No. HRS No. SMA(R)J-U.FLJ-PA2 311-0468-0 Part No. HRS No. SMA(R)J-U.FLJ-BPA-4 311-0464-0 The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use. The contents of this catalog are current as of date of 06/2018. Contents are subject to change without notice for the purpose of improvements. 2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN TEL: +81-45-620-3526 Fax: +81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com Powered by TCPDF (www.tcpdf.org)