MW6IC2420N NXP | Alldatasheet

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 12

Technical content

Features

  • Characterized with Series Equivalent Large- -Signal Impedance Parameters and Common Source Scattering Parameters
  • On- -Chip Matching (50 Ohm Input, DC Blocked, >3 Ohm Output)
  • Integrated Quiescent Current Temperature Compensation with Enable/Disable Function(1)
  • Integrated ESD Protection
  • 225°C Capable Plastic Package
  • RoHS Compliant
  • In Tape and Reel. R1 Suffix = 500 Units, 44 mm Tape Width, 13 inch Reel

Figure 1. Functional Block Diagram Figure 2. Pin Connections the source terminal for the transistors.

  1. Refer to AN1977,Quiescent Current Thermal Tracking Circuit in the RF Integrated Circuit Familyand to AN1987,Quiescent Current Control

for the RF Integrated Circuit Device Family. Go to http://www.freescale.com/rf. Select Documentation/Application Notes - - AN1977 or AN1987.

2450 MHz, 20 W, 28 V

© Freescale Semiconductor, Inc., 2007- -2010.All rights reserved.

Table 1. Maximum Ratings Table 2. Thermal Characteristics Table 3. ESD Protection Characteristics Table 4. Moisture Sensitivity Level Table 5. Electrical Characteristics(TA =2 5°C unless otherwise noted) PAR = 8.5 dB @ 0.01% Probability on CCDF.

  1. Continuous use at maximum temperature will affect MTTF.
  2. MTTF calculator available at http://www.freescale.com/rf. Select Software & Tools/Development Tools/Calculators to access

MTTF calculators by product. Select Documentation/Application Notes - - AN1955.

Table 5. Electrical Characteristics(TA =2 5°C unless otherwise noted)(continued) Table 6. Electrical Characteristics(TA =2 5°C unless otherwise noted)

  1. Refer to AN1977,Quiescent Current Thermal Tracking Circuit in the RF Integrated Circuit Familyand to AN1987,Quiescent Current Control

for the RF Integrated Circuit Device Family. Go to http://www.freescale.com/rf. Select Documentation/Application Notes - - AN1977 or AN1987.

Figure 3. MW6IC2420NBR1 Test Circuit Schematic — 2450 MHz Table 7. MW6IC2420NBR1 Test Circuit Component Designations and Values

Figure 4. MW6IC2420NBR1 Test Circuit Component Layout — 2450 MHz

Figure 5. Power Gain and Power Added Efficiency

32 V 30 V

Figure 6. Power Gain and Power Added Figure 7. Power Gain and Power Added Figure 8. MTTF versus Junction Temperature is operated at VDD =2 8V d c ,Pout = 20 W Avg., and PAE = 27%.

Figure 9. Series Equivalent Source and Load Impedance

Refer to the following documents to aid your design process. Application Notes

  • AN1907: Solder Reflow Attach Method for High Power RF Devices in Plastic Packages
  • AN1955: Thermal Measurement Methodology of RF Power Amplifiers
  • AN1977: Quiescent Current Thermal Tracking Circuit in the RF Integrated Circuit Family
  • AN1987: Quiescent Current Control for the RF Integrated Circuit Device Family
  • AN3263: Bolt Down Mounting Method for High Power RF Transistors and RFICs in Over- -Molded Plastic Packages Engineering Bulletins
  • EB212: Using Data Sheet Impedances for RF LDMOS Devices

REVISION HISTORY

The following table summarizes revisions to this document. Revision Date Description 0 Mar. 2007 • Initial Release of Data Sheet 1 Apr. 2008 • Changed 220°C to 225°C in Capable Plastic Package bullet, p. 1

  • Added Footnote 1 to Quiescent Current Temperature bullet under Features section and to callout in Fig. 1, Functional Block Diagram, p. 1
  • Added Case Operating Temperature limit to the Maximum Ratings table and set limit to 150°C, p. 2
  • Operating Junction Temperature increased from 200°C to 225°C in Maximum Ratings table and related “Continuous use at maximum temperature will affect MTTF” footnote added, p. 2
  • Replaced Case Outline 1329- -09, Issue L, with 1329- -09, Issue M, p. 8- -10. Added pin numbers 1 through 17. 2 Feb. 2009 • Changed Storage Temperature Range in Max Ratings table from - -65 to +200 to - -65 to +150 for standardization across products, p. 2
  • Modified data sheet to reflect RF Test Reduction described in Product and Process Change Notification number, PCN13232, p. 2 3 Dec. 2010 • Corrected data sheet to reflect RF Test Reduction described in Product and Process Change Notification number, PCN13232, and Product Discontinuance Notification number, PCN14260, adding applicable overlay, p. 1, 2 LIFETIME BUY LAST ORDER 1 JUL 11 LAST SHIP 30 JUN 12

Information in this document is provided solely to enablesystem and software implementers to use Freescale Semiconductor products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits or integrated circuits based on the information in this document. Freescale Semiconductor reserves the right to make changes without further notice to any products herein. Freescale Semiconductor makes no warranty, representation or guarantee regarding the suitability of its productsfor any particular purpose, nor does Freescale Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and allliability, including without limitation consequential or incidental damages. “Typical” parameters that may be provided in Freescale Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals”, must be validated for each customer application by customer’s technical experts. Freescale Semiconductor does not convey any license under its patent rights nor the rights of others. Freescale Semiconductor products are not designed, intended, or authorized for use as components insystems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Freescale Semiconductor product could create a situation where personal injury or death may occur. Should Buyer purchase or use Freescale Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold Freescale Semiconductor and its officers, employees, subsidiaries, affiliates, and distributorsharmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Freescale Semiconductor was negligent regarding the design or manufacture of the part. Freescalet and the Freescale logo are trademarks of Freescale Semiconductor, Inc. All other product or service names are the property of their respective owners. © Freescale Semiconductor, Inc. 2007- -2010. All rights reserved. How to Reach Us: Home Page: www.freescale.com Web Support: http://www.freescale.com/support USA/Europe or Locations Not Listed: Freescale Semiconductor, Inc. Technical Information Center, EL516

2100 East Elliot Road

Tempe, Arizona 85284 www.freescale.com/support Europe, Middle East, and Africa: Freescale Halbleiter Deutschland GmbH Technical Information Center Schatzbogen 7

81829 Muenchen, Germany

+44 1296 380 456 (English) +46 8 52200080 (English) +49 89 92103 559 (German) + 3 316 93 54 84 8( F r e n c h ) www.freescale.com/support Japan: Freescale Semiconductor Japan Ltd. Headquarters ARCO Tower 15F 1- -8- -1, Shimo- -Meguro, Meguro- -ku, Tokyo 153- -0064 Japan 0120 191014 or +81 3 5437 9125 support.japan@freescale.com Asia/Pacific: Freescale Semiconductor China Ltd. Exchange Building 23F No. 118 Jianguo Road Chaoyang District Beijing 100022 China +86 10 5879 8000 support.asia@freescale.com For Literature Requests Only: Freescale Semiconductor Literature Distribution Center LDCForFreescaleSemiconductor@hibbertgroup.com Document Number: MW6IC2420N Rev. 3, 12/2010