3216TD EATON | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Time-delay Chip™ surface mount fuse
- Time-delay, surface mount fuse
- RoHS compliant, lead-free and halogen-free
- High inrush withstand capability
- Wire-in-Air performance
- Compatible with leaded and lead-free reflow and wave solder Pb HALOGEN HFFREE Agency information Soldering method
- cURus Recognition File number: E19180
- Wave immersion: 260°C, 10 Sec. max.
- Infrared reflow: 260°C, 30 Sec. max.
- Hand solder: 350°C, 3 Sec. max. Environmental data
- Operating temperature range: -55 °C to +125 °C with proper derating
- Vibration: MIL-STD-202, Method 204 Condition D
- Solderability: ANSI/J-STD-002C, Test B Ordering
- Specify packaging and product code (i.e., TR/3216TD1-R) Electrical Characteristic s % of Amp Rating Opening Time 100% 4 Hours Minimum 200% 1 Sec. Minimum, 120 Sec . Maximum 300% 0.05 Sec . Minimum, 3 Sec. Maximum 800% 0.002 Sec . Minimum, 0.05 Sec . Maximum Speci/f_ications Current Interrupting Typical Typical Typical Product Code Rating Voltage Rating Rating (Amps)* Resistance Melt I 2t† Voltage Amps Va ac c Vdc AC C DC DC Drop (mV)‡ 3216TD6.3-R 6.3 32 32 3 35 5 35 0.006 10.54 56 3216TD7-R 7 32 32 3 35 5 35 0.006 12.03 64 3216TD8-R 8 32 32 3 35 5 35 0.0055 16.03 65 3216TD10-R 10 32 32 3 35 5 35 0.0045 42.71 72 3216TD12-R 12 32 32 3 35 5 35 0.00425 45.56 79 * AC Interrupting Rating (Measured at rated voltage with a unity power factor); DC Interrupting Rating (Measured at rated voltage,time constant of less than 50 microseconds,battery source) DC Cold Resistance (Measured at 10% of rated current) † T ypical Melting2 I t (Measured with a battery bank at rated DC voltage,10x-rated current at 1 microsecond,not to exceed IR. Above 7A uses 70 micron thickness copper layer test board of IEC 60127-3 Others uses 35 micron thickness copper layer . ‡ T ypical Voltage Drop (Measured at rated current after temperature stabilizes) Device designed to carry rated current for four hours minimum. An operating current of 80% or less of rated current is recommended, with further derating required at elevated ambient temperatu (Ω)
1000 Eaton Boulevard
Cleveland, OH 44122 United States www.eaton.com/electronics © 2017 Eaton All Rights Reserved Printed in USA Publication No. 4321 BU-SB10214 May 2017 Eaton is a registered trademark. All other trademarks are property of their respective owners. Life Support Policy: Eaton does not authorize the use of any of its products for use in life support devices or systems without the express written approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. Eaton reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Eaton also reserves the right to change or update, without notice, any technical information contained in this bulletin. 3216TD Time-delay Chip™ surface mount fuse Technical Data 4321 Effective May 2017 Recommended Pad Layout - mm (in) Dimensions - mm (in) Drawing Not to Scale Time-Current Curves Current In Amps Time In Seconds Packaging Packaging Code Pre/f_ix Description TR 2500 fuses on 12mm tape-and-reel on a 180mm reel per EIA-481-A & IEC286-3