3216FF EATON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

  • UL Recognition Guide JDYX2 & File E19180.
  • CSA Component Acceptance: 053787 C 000 & Class No: 1422 30. Ordering
  • Specify packaging and product code (i.e., TR/3216FF250-R) 3216FF Fast-acting Chip™ surface mount fuse
  • AEC-Q200 qualified (250 mA to 7 A)
  • Fast-acting surface mount fuse
  • Ratings up to 30 amps
  • Excellent temperature and cycling characteristics
  • Compatible with reflow and wave solder Agency information Pb HALOGEN HFFREE Environmental data
  • Thermal Shock: MIL-STD-202, Method 107, Test Condition B (-65 °C to +125 °C)
  • Vibration: MIL-STD-202, Method 204, Test Condition C (55 Hz - 2 kHz, 10 G)
  • Moisture Resistance: MIL-STD-202, Method 106,10 day cycle
  • Solderability: ANSI/J-STD-002, Test B
  • Additional resistance to solder heat test: MIL- STD-202G Method 210F Condition A
  • Operating Temperature: -55 ºC to +125 ºC
  • AEC-Q200 qualified (250 mA to 7 A)
  • cURus Recognition File: E19180, Guide JDYX2/ JDYX8 Soldering method
  • Wave Immersion: 260 °C, 10 sec max.
  • Infrared Reflow: 260 °C, 30 sec max.

Electrical Characteristics

Amp Rating % of Amp Rating Opening Time 250mA - 30A 100% 4 Hrs. Min. 1.25A - 3A 200% 60 Sec. Max. 250mA - 3A 250% 5 Sec. Max. 4A - 7A 350% 1 Sec. Max. 10A - 30A 350% 5 Sec. Max. Speci/f_ications Part Volt Ratings Interrupting Rating* Typical DC Cold (amps) AC/DC Resistance (Ω) Typical Melt Typical Voltage Agency Approvals Number Vac Vdc I2t (A2S) DC* Drop (V)† UR CSA cURus 3216FF250-R 32 63 50 3.5000 0.00038 1.40 X X 3216FF375-R 32 63 50 1.7500 0.00077 0.73 X X 3216FF500-R 32 63 50 0.9800 0.00190 0.66 X X 3216FF750-R 32 63 50 0.5400 0.0053 0.63 X X 3216FF1-R 32 63 50 0.2190 0.030 0.20 X X 3216FF1.25-R 32 63 50 0.1700 0.046 0.18 X X 3216FF1.5-R 32 63 50 0.1190 0.093 0.18 X X 3216FF2-R 32 63 50 0.0660 0.126 0.16 X X 3216FF2.5-R 32 63 50 0.0460 0.260 0.14 X X 3216FF3-R 32 63 50 0.0360 0.275 0.13 X X 3216FF4-R 32 32 50 0.0180 0.337 0.11 X X 3216FF4.5-R 32 32 50 0.0160 0.405 0.10 X X 3216FF5-R 32 32 50 0.0140 0.534 0.09 X X 3216FF6.5-R 32 32 50 0.0086 2.294 0.076 X X 3216FF7-R 32 32 50 0.0070 3.623 0.078 X X 3216FF10-R 24 150 0.0045 2.0 0.062 X X 3216FF12-R 24 150 0.0039 7.0 0.070 X X 3216FF15-R 24 150 0.0031 25.5 0.066 X X 3216FF20-R 24 150 0.0018 48.6 0.060 X X 3216FF25-R 24 250 0.0014 32.0 0.057 X X 3216FF30-R 24 300 0.0012 43.0 0.068 X X *AC Interrupting Rating measured at rated voltage with a unity power factor; DC Interrupting Rating measured at rated voltage, time constant of less than 50 microseconds, battery source Typical DC Cold Resistance measured at 10% of rated current *Typical Melting I2t measured with a battery bank at rated DC voltage, 10x-rated current, not to exceed IR, time constant of calibrated circuit less than 50 microseconds (6.5A - 30A measured at interrupting rating) †Typical Voltage Drop measured at rated current after temperature stabilizes. It is recommended that fuses be mounted with ceramic (white) side facing up. Device designed to carry rated current for four hours minimum. An operating current of 80% or less of rated current is recommended, with further derating required at elevated ambient temperatures.

1000 Eaton Boulevard

Cleveland, OH 44122 United States www.eaton.com/electronics © 2017 Eaton All Rights Reserved Printed in USA Publication No. 3001 BU-SB11302 October 2017 Eaton is a registered trademark. All other trademarks are property of their respective owners. Life Support Policy: Eaton does not authorize the use of any of its products for use in life support devices or systems without the express written approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. Eaton reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Eaton also reserves the right to change or update, without notice, any technical information contained in this bulletin. 3216FF Fast-acting Chip™ surface mount fuse Technical Data 3001 Effective May 2017 Recommended Pad Layout - mm (in) Dimension - mm/inches Dr awing Not to Scale Time-Current Curve Current in Amps Time in Seconds 0.25A 0.375A 0.5A 0.75A 1.5A 2.5A 4.5A 5A 6.5A 10A 12A 15A 20A 25A 30A Packaging Packaging Code Pre/f_ix Description TR 3000 fuses on 8mm tape-and-reel on a 7 inch (178mm) reel per EIA Standard RS481