3202 SENSATA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

Features

  • Bushing Mount / Sleeve Bearing
  • 7/8” to 1-3/4” Diameter Bushing Mount
  • Wirewound 3, 5 and 10-Turn Precision Potentiometers 3205 / 3206 3705 3208 / 3209 3202 / 3203 3702 3605 3232 / 3233 3602 Actual Electrical Travel 1080°+4°-0° 1080° +1°-0° 1080° +4°-0° Normal Resistance Range 50 Ω to 30K 50Ω to 100K 50 Ω to 50K 100 Ω to 100K 100 Ω to 300K 50Ω to 100K 100Ω to 100K 100Ω to 300K Extended Resistance Range (1) 3Ω to 75K 5Ω to 250K 5Ω to 125K 10Ω to 250K 10Ω to 830K 5Ω to 180K 10Ω to 200K 10Ω to 600K Resistance Tolerance: Standard % ±3 Best Practical % ±1 Power Rating At 70°C, Derating to 0 At 125°C Linearity, Independent, Tolerance, Standard% Equivalent Noise Resistance (ENR) Max. (Ohms) 100 End Voltage Max. (% Of Total Applied Voltage) Within linearity tolerance Insulation Resistance At 500 VDC, Min. (Megohms) 1000 Dialectric Withstanding Voltage (Volts RMS) 1000 Max. Applied Voltage(Volts DC)(2) 1000 Temperature Coefficient Of Potentiometer, Max. % / C° ±.007 Tap Spacing Minimum 30° 13° 30° 13° 30° 13°

www.sensata.com Page 2 Copyright © 2018 Sensata Technologies, Inc. DIMENSIONS Mechanical Environmental Temperature Range (°C) Standard -55 to + 125 THEORETICAL RESOLUTION- For typical coll characteristics by model number and resistance value, see Resolution Tables. ALL MODELS are manufactured to meet or exceed applicable characteristics of MIL-R-12934. For MILITARY-APPROVED (QPL) Listings. TOLERANCES UNLESS OTHERWISE SPECIFIED: FRACTIONAL: ±1/64" DECIMAL: ±.005" ANGULAR: ±1° Dimensions are in in[mm] 3205 / 3206 3705 3208 / 3209 3202 / 3203 3702 3605 3232 / 3233 3602 Total Mechanical Travel 1080° +4°-0° 3600° +4°-0° 1080° +4°-0° 3600° +4°-0° Mechanical Life Shaft Revolutions 2 million Ganged Cups, Max. (Number) 3 2 3 2 Taps, Max., Excluding End Terminations 10 52 22 46 135 52 46 135 Moment Of Inertia, Per Cup (gm-cm2) 0.25 7 0.3 0.4 12 7 0.4 12 Pilot Diameter Runout, Max. .0015 .002 Shaft Runout, Max. .001 .002 .001 Shaft End, Max. .005 .010 .005 Stop Strenght Static (oz.-in) 128 1000 128 1000 750 100 750

Specification No.:02055-001 Rev.02/14/18 Americas +1 (800) 350 2727 sensors@sensata.com Europe, Middle East & Africa +33 (3) 88 20 8080 position-info.eu@sensata.com Asia Pacific sales.isasia@list.sensata.com China +86 (21) 2306 1500 Japan +81 (45) 277 7117 Korea +82 (31) 601 2004 India +91 (80) 67920890 Rest of Asia +886 (2) 27602006 ext 2808 Page 3 www.sensata.com CONTACT USSensata Technologies, Inc. (“Sensata”) data sheets are solely intended to assist designers (“Buyers”) who are developing systems that incorporate Sensata products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible for using its independent analysis, evaluation and judgment in designing Buyer’s systems and products. Sensata data sheets have been created using standard laboratory conditions and engineering practices. Sensata has not conducted any testing other than that specifically described in the published documentation for a particular data sheet. Sensata may make corrections, enhancements, improvements and other changes to its data sheets or components without notice. Buyers are authorized to use Sensata data sheets with the Sensata component(s) identified in each particular data sheet. HOWEVER, NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATA SHEETS ARE PROVIDED “AS IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATA SHEETS OR USE OF THE DATA SHEETS, EXPRESS, IMPLIED OR STATUTORY , INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY , FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO SENSATA DATA SHEETS OR USE THEREOF. All products are sold subject to Sensata’s terms and conditions of sale supplied at www.sensata.com SENSATA ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY AND SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS, AND ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS-RELATED INFORMATION OR SUPPORT THAT MAY BE PROVIDED BY SENSATA. Mailing Address: Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA. Copyright © 2018 Sensata Technologies, Inc. (1) All specifications listed apply to units with a total resistance within the normal resistance range. Higher or lower resistances may require some degradation of listed specifications because of resistance wire composition or size (2) Not to exceed specified power rating. Notes: TEMPERATURE (°C) % RATED POWER 130°70° 50% 120° 100% Specifications subject to change without notice. These commodities, technology or software if exported from the United States must be in accordance with the Bureau of Industry and Security, Export Administration regulations. Diversion contrary to U.S. Law is prohibited. DIM / SERVO MODEL 3202 3203 3205 3206 3208 3209 3232 3233 3602 3605 3702 3705 0.007 1.148 ± 0.007 1.925± 0.007 1.148 ± 0.007 B 11/16 ± 13/16 ± 11/16 ± 13/16 ± 11/16 ± 13/16 ± 11/16 ± 1/32 13/16 ± 1/16 C 5/16 D 0.875 1.750 E 0.281 ± 0.001 0.4062 ± 0.001 0.281 ± 0.001 0.4062 ± 0.001 0.281 ± 0.001 0.4062 ± 0.001 0.281 ± 0.001 0.4062 ± 0.001 F 0.1248 +0/- 0.0003 0.2497 +0/- 0.0003 0.1248 +0/- 0.0003 0.2497 +0/- 0.0003 0.1248 +0/- 0.0003 0.2497 +0/- 0.0003 0.1248 +0/- 0.0003 0.2497 +0/-0.0003 G 1/4-32 NEF-2A THD 3/8-32 UNEF-2A THD 1/4-32 NEF-2A THD 3/8-32 UNEF-2A THD 1/4-32 NEF-2A THD 3/8-32 UNEF-2A THD 1/4-32 NEF-2A THD 3/8-32 UNEF-2A THD H (Radius MAX) 9/16 1-5/64 J (Radius MAX) 5/8 1-1/16 K N/A 0.562 L N/A 0.125