312292

312292 MACOM | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

1. SCOPE Lh Content This specification covers the requirements for application of wire to AMP” MTA (Mass Termination Assembly) 100 connectors. These requirements are applicable to hand or automatic machine application tools. Specific wire and insulation ranges relative to the products covered in this specification are 28-22 AWG tin plated solid, concentric fused stranded and concentric stranded wire with standard PVC thermoplastic insulation having a maximum insulation outside diameter of .060 when terminated one position at a time, or .050 when mass terminating. Strandcd wirc approved by AMP Engincering per UL Style 1007 and 1061 is 24-22 AWG 7 and 19 stranded, and 28-26 AWG 7 stranded. Other wire sizes, styles, and insulation materials shall be approved by AMP Enginecring. 1.2, Reference Specification For applicable performance requirements sec AMP Spccification 108-1050. 2. NOMENCLATURE Strain Relief ee Coa ° FHI an) A | A ne — paar h =

35 Contact —

25 q -— Wire ae AOLe 38g Hous ing —_ Se wet 7, I il

20 HLL

eas Section A-A Figure | ™~ga5 ue Trademark of AMP Incorporated

2 ASN OD oh VD AMP INCORPORATED

Be oy 7 p L = ee. AMP | Harrisburg, Pa. 17105 ‘APP NO REV | Loc Deiat, eye | N4-1019 G_ Revise per ECN Mig TITLE AG-689 LC | gre CONNECTOR, MTA 100 [rere necone Lar fore | or 3 | AMP 1250-16 REV 10-85

1. INSERTION REQUIREMENTS 3.1. Wire Termination After termination, wire shall meet the requirements specified in Figure 2. . 040 Min Conductor = Vi Oo Wake ——as, BIB

4 Hy Centerline of Connector

Y ALU Figure 2 3.2, Contact Damage There shall be no evidence of physical damage or distortion to any portion of the contact after wire termination, 3.3. Housing Damage A. There shall be no cracks, breaks or other visible damage to the housing due to wire termination. B. Skiving of plastic on the inside wall of the housing cavity is permissible, provided that conditions specificd in Para 3.3.A. arc met. 3.4, Broken Strands There shall be no broken strands in the conductor after termination. 3.5. Exposed Conductor Exposed conductors shall not exceed the limits specified in Figure 3 after termination. PAGE [NO REv | Loo AMP 1251-13 REV 10-85