DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
dies in a clean, dry area. Store the tool with the handles closed to prevent objects from becoming lodged within the jaws. 8. VISUAL INSPECTION The crimping dies should be inspected on a regular basis to ensure that they have not become worn or damaged. Inspect the crimp sections for flattened, chipped, worn, or broken areas. If damage or abnormal wear is evident, the dies must be replaced. See Section 9, REPLACEMENT. 9. REPLACEMENT Customer-replaceable parts are shown in Figure 10. If the dies are damaged or worn excessively, they must be replaced. Available separately, PRO-CRIMPER III Repair Kit 679221-1 includes a replacement nut and a variety of pins, rings, screws, and springs for use on the PRO- CRIMPER II Hand Tool Frame. Order the repair kit and replaceable parts through your TE re presentative, or call 1-800-526-5142, or send a facsimile of your purchase order to 1-717-986-7605, or write to: CUSTOMER SERVICE (038-035) TYCO ELECTRONICS CORPORATION PO BOX 3608 HARRISBURG PA 17105-3608 10. REVISION SUMMARY Since the previous release of this instruction sheet, the new company logo has been applied. PART NUMBERS DIE ASSEMBLY INDENTER ANVIL 220195-1 310646-2 310647-2 Figure 10