30WQ10FNTRRPBF

30WQ10FNPBF IRF | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

SCHOTTKY RECTIFIER 3.5 Amp 30WQ10FNPbF Bulletin PD-21055 rev. B 08/06 1www.irf.com Major Ratings and Characteristics IF(AV) Rectangular 3.5 A waveform VRRM 100 V IFSM @ tp = 5 μs sine 440 A VF @ 3 Apk, TJ = 125°C 0.63 V TJ - 40 to 150 °C Characteristics Values Units Description/ Features The 30WQ10FNPbF surface mount Schottky rectifier has been designed for applications requiring low forward drop and small foot prints on PC board. Typical applications are in disk drives, switching power supplies, converters, free-wheeling diodes, battery charging, and reverse battery protection. Popular D-PAK outline Small foot print, surface mountable Low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability Lead-Free ("PbF" suffix) IF(AV) = 3.5Amp VR = 100V Case Styles D-PAK (TO-252AA) Anode 1 3 Base Cathode Anode 4, 2

Bulletin PD-21055 rev. B 08/06 2 www.irf.com Part number 30WQ10FNPbF VR Max. DC Reverse Voltage (V) VRWM Max. Working Peak Reverse Voltage (V) 100 Voltage Ratings VFM Max. Forward Voltage Drop 0.81 V @ 3A * See Fig. 1 (1) 0.96 V @ 6A

0.63 V @ 3A

0.74 V @ 6A

IRM Max. Reverse Leakage Current 1 mA T J = 25 °C * See Fig. 2 (1) 4.9 mA T J = 125 °C VF(TO) Threshold Voltage 0.48 V TJ = TJ max. rt Forward Slope Resistance 30.89 mΩ CT Typical Junction Capacitance 92 pF V R = 5VDC (test signal range 100Khz to 1Mhz) 25 °C LS Typical Series Inductance 5.0 nH Measured lead to lead 5mm from package body dv/dt Max. Voltage Rate of Change 10000 V/ μs (Rated V R) TJ = 25 °C TJ = 125 °C VR = rated VR Electrical Specifications Parameters 30WQ... Units Conditions (1) Pulse Width < 300μs, Duty Cycle < 2% TJ Max. Junction Temperature Range(*)-40 to 150 °C Tstg Max. Storage Temperature Range -40 to 150 °C RthJC Max. Thermal Resistance Junction 4.7 °C/W DC operation * See Fig. 4 to Case wt Approximate Weight 0.3 (0.01) g (oz.) Case Style D - PAK Similar to TO-252AA Marking Device 30WQ10FN Thermal-Mechanical Specifications Parameters 30WQ... Units Conditions IF(AV) Max. Average Forward Current 3.5 A 50% duty cycle @ T C = 135°C, rectangular wave form * See Fig. 5 IFSM Max. Peak One Cycle Non-Repetitive 440 5 μs Sine or 3μs Rect. pulse Surge Current * See Fig. 7 7 0 10ms Sine or 6ms Rect. pulse EAS Non-Repetitive Avalanche Energy 5.0 mJ T J = 25 °C, IAS = 1 Amp, L = 10 mH IAR Repetitive Avalanche Current 0.5 A Current decaying linearly to zero in 1 μsec Frequency limited by TJ max. VA = 1.5 x VR typical Absolute Maximum Ratings Following any rated load condition and with rated V RRM applied A Parameters 30WQ... Units Conditions < thermal runaway condition for a diode on its own heatsink(*) dPtot 1 dTj Rth( j-a)

Bulletin PD-21055 rev. B 08/06 3www.irf.com Fig. 2 - Typical Values of Reverse Current Vs. Reverse Voltage Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics Fig. 1 - Maximum Forward Voltage Drop Characteristics 0.0001 0.001 0.01 0.1 0 2 04 06 08 0 1 0 0 R R 125°C 100°C 75°C 50°C 25°C R evers e Current - I (mA) T = 150°CJ R evers e Voltage - V (V) 100 0 2 04 06 08 0 1 0 0 R TJ unction Capacitance - C (pF ) R evers e Voltage - V (V) T = 25°CJ 0.1 thJ C t , R ectangular P uls e D uration (S econds ) S ingle P uls e ( Th e rm a l Re si st a n c e ) T hermal Impedance Z (°C/W) D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 Notes: 1. Duty factor D = t / t 2. Peak T = P x Z + T 1 2 CthJCDMJ PDM 100 Instantaneous F orward Current - I (A)F FM F orward Voltage Drop - V (V) T = 150°C T = 125°C T = 25°C J J J

Bulletin PD-21055 rev. B 08/06 4 www.irf.com Fig. 5 - Maximum Allowable Case Temperature Vs. Average Forward Current Fig. 6 - Forward Power Loss Characteristics Fig. 7 - Maximum Non-Repetitive Surge Current (2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = 80% rated VR 100 1000 10 100 1000 10000 FSM p Non-R epetitive S urge Current - I (A) S quare Wave Pulse Duration - t (microsec) At Any R ated L oad Condition And With R ated V Applied Following S urge RRM 115 120 125 130 135 140 145 150 155 DC Allowable Cas e T emperature - (°C) F( A V) se e no te ( 2) S quare wave (D = 0.50) 80% R ated V appliedR Aver age F orwar d Current - I (A) 0.5 1.5 2.5 3.5 012345 DC Aver age P ower L os s - (Watts ) F( A V) RM S Li m i t D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 Aver age F orwar d Cur rent - I (A)

Bulletin PD-21055 rev. B 08/06 5www.irf.com Part Marking Information ASSEMBLED ON WW 02, 2000 LOT CODE 8024 LOGO LOT CODE ASSEMBLY RECTIFIER INTERNATIONAL X = SITE ID P = LEAD-FREE WEEK 02 YEAR 0 = 2000 DATE CODE PART NUMBERTHIS IS A 30WQ10FN 30WQ10FN Outline Table Modified JEDEC outline TO-252AA Dimensions in millimeters and (inches)

Bulletin PD-21055 rev. B 08/06 6 www.irf.com Tape & Reel Information TR FEED DIRECTION 4.1 (0.16) 3.9 (0.15) 2.1 (0.83) 1.9 (0.07) 12.1 (0.48) 1.65 (0.06) 1.85 (0.07) 1.65 (0.06) 7.4 (0.29) 2.6 (0.10) 1.5 (0.06) 7.6 (0.30) 11.9 (0.47) 1.85 (0.07) TO-252AA Tape & Reel When ordering, indicate the part number, part orientation, and the quantity. Quantities are in multiples of 2,000 pieces per reel for TR and multiples of 3,000 pieces per reel for both TRL and TRR. 13 (0.52) DIA. DIA. MAX. 22.4 (0.88) 0.35 (0.01) 16.3 (0.64) 15.7 (0.62) 2.75 (0.11) 2.55 (0.10) 0.25 (0.01) 6.8 (0.26) 7.0 (0.28) TRR FEED DIRECTION 4.1 (0.16) 3.9 (0.15) 2.1 (0.83) 1.9 (0.07) 8.1 (0.32) 1.85 (0.07) 1.65 (0.06) 1.85 (0.07) 1.65 (0.06) 7.4 (0.29) 2.6 (0.10) 1.5 (0.06) 7.6 (0.30) 7.9 (0.31) 0.35 (0.01) 16.3 (0.64) 15.7 (0.62) 2.75 (0.11) 2.55 (0.10) 0.25 (0.01) 10.4 (0.41) 10.6 (0.42) DIA. TRL FEED DIRECTION 4.1 (0.16) 3.9 (0.15) 2.1 (0.83) 1.9 (0.07) 8.1 (0.32) 1.85 (0.07) 1.65 (0.06) 1.85 (0.07) 1.65 (0.06) 7.4 (0.29) 2.6 (0.10) 1.5 (0.06) 7.6 (0.30) 7.9 (0.31) 0.35 (0.01) 16.3 (0.64) 15.7 (0.62) 2.75 (0.11) 2.55 (0.10) 0.25 (0.01) 10.4 (0.41) 10.6 (0.42) DIA. DIA. DIA. DIA. DIA.

Bulletin PD-21055 rev. B 08/06 7www.irf.com IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 08/06 Data and specifications subject to change without notice. This product has been designed and qualified for AEC Q101 Level and Lead-Free. Qualification Standards can be found on IR's Web site. Ordering Information Table

30 W Q 10 FN TRL PbF

1 - Current Rating (3.5A) W = D-Pak 3 - Schottky "Q" Series 4 - Voltage Rating (10 = 100V) 5 - FN = TO-252AA (D-Pak) 6 - y none = Tube (50 pieces) y TR = Tape & Reel y TRL = Tape & Reel (Left Oriented) y TRR = Tape & Reel (Right Oriented) 7 - y none = Standard Production y PbF = Lead-Free