30WQ04FN

30WQ04FN IRF | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

SCHOTTKY RECTIFIER 3.5 Amp 30WQ04FN Bulletin PD-20521 rev. G 03/03 1www.irf.com Major Ratings and Characteristics IF(AV) Rectangular 3.5 A waveform VRRM 40 V IFSM @ tp = 5 µs sine 500 A VF @ 3 Apk, TJ = 125°C 0.49 V TJ - 40 to 150 °C Characteristics 30WQ04FN Units Description/ Features The 30WQ04FN surface mount Schottky rectifier has been designed for applications requiring low forward drop and small foot prints on PC board. Typical applications are in disk drives, switching power supplies, converters, free-wheeling diodes, battery charging, and reverse battery protection. Popular D-PAK outline Small foot print, surface mountable Low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability 6.73 (0.26) 6.35 (0.25) 5.46 (0.21) 5.21 (0.20) 1.27 (0.05) 0.88 (0.03) 5.97 (0.23) 1 - Anode 2 - Cathode 3 - Anode 4 - Cathode 1.64 (0.02) 1.52 (0.06) 1.15 (0.04) 1.14 (0.04) 0.76 (0.03) 2.28 (0.09) 0.89 (0.03) 0.64 (0.02) 4.57 (0.18) 123 6.22 (0.24) 2.38 (0.09) 2.19 (0.08) 6.45 (0.24) 5.68 (0.22) 10.42 (0.41) 9.40 (0.37) 0.46 (0.02) 0.58 (0.02) 1.14 (0.04) 0.89 (0.03) 0.51 (0.02) MIN. 0.58 (0.02) 0.46 (0.02) MINIMUM RECOMMENDED FOOTPRINT 5.97 (0.24) 10.67 (0.42) 1.65 (0.06) 6.48 (0.26) 2.54 (0.10) 2.28 (0.09) Dimensions in millimeters and (inches) Conform to JEDEC outline D-Pak (Similar to TO-252AA) D-Pak (TO-252AA) Anode 1 3 Base Cathode Anode 4, 2

Bulletin PD-20521 rev. G 03/03 2 www.irf.com Part number 30WQ04FN VR Max. DC Reverse Voltage (V) VRWM Max. Working Peak Reverse Voltage (V) 40 Voltage Ratings VFM Max. Forward Voltage Drop 0.53 V @ 3A * See Fig. 1 (1) 0.67 V @ 6A

0.49 V @ 3A

0.62 V @ 6A

IRM Max. Reverse Leakage Current 2 mA T J = 25 °C * See Fig. 2 (1) 24 mA T J = 125 °C VF(TO) Threshold Voltage 0.34 V TJ = TJ max. rt Forward Slope Resistance 37.33 m Ω CT Typical Junction Capacitance 189 pF V R = 5VDC, (test signal range 100Khz to 1Mhz) 25 °C LS Typical Series Inductance 5.0 nH Measured lead to lead 5mm from package body dv/dt Max. Voltage Rate of Change 10000 V/µs (Rated V R) TJ = 25 °C TJ = 125 °C VR = rated VR Electrical Specifications Parameters 30WQ... Units Conditions (1) Pulse Width < 300µs, Duty Cycle < 2% TJ Max. Junction Temperature Range (*)-40 to 150 °C Tstg Max. Storage Temperature Range -40 to 150 °C RthJC Max. Thermal Resistance Junction 4.7 °C/W DC operation * See Fig. 4 to Case wt Approximate Weight 0.3 (0.01) g (oz.) Case Style D - PAK Similar to TO-252AA Thermal-Mechanical Specifications Parameters 30WQ... Units Conditions IF(AV) Max. Average Forward Current 3.5 A 50% duty cycle @ T C = 135°C, rectangular wave form * See Fig. 5 IFSM Max. Peak One Cycle Non-Repetitive 500 5µs Sine or 3µs Rect. pulse Surge Current * See Fig. 7 80 10ms Sine or 6ms Rect. pulse EAS Non-Repetitive Avalanche Energy 8.0 mJ T J = 25 °C, IAS = 1 Amp, L = 16 mH IAR Repetitive Avalanche Current 1.0 A Current decaying linearly to zero in 1 µsec Frequency limited by TJ max. VA = 1.5 x VR typical Absolute Maximum Ratings Following any rated load condition and with rated VRRM applied A Parameters 30WQ... Units Conditions < thermal runaway condition for a diode on its own heatsink (*) dPtot 1 dTj Rth( j-a)

Bulletin PD-20521 rev. G 03/03 3www.irf.com Fig. 2 - Typical Values of Reverse Current Vs. Reverse Voltage Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics Fig. 1 - Maximum Forward Voltage Drop Characteristics 100 I ns tantaneous F orward Curr ent - I (A) T = 150°C T = 125°C T = 25°C J J J F FM F orward Voltage Drop - V (V) 0.001 0.01 0.1 100 0 5 10 15 20 25 30 35 40 R R 125°C 100°C 75°C 50°C 25°C R evers e Current - I (mA) T = 150°CJ R evers e Voltage - V (V) 100 1000 0 5 10 15 20 25 30 35 40 45 T = 25°CJ R TJunction Capacitance - C (pF ) R evers e Voltage - V (V) 0.1 thJ C t , R ectangular P uls e D uration (S econds ) S ingle Pulse (T hermal R es is tance) T hermal Impedance Z (°C/ W) D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 Notes: 1. Duty factor D = t / t 2. Peak T = P x Z + T 1 2 CthJCDMJ PDM

Bulletin PD-20521 rev. G 03/03 4 www.irf.com Fig. 5 - Maximum Allowable Case Temperature Vs. Average Forward Current Fig. 6 - Forward Power Loss Characteristics Fig. 7 - Maximum Non-Repetitive Surge Current (2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = 80% rated VR 110 115 120 125 130 135 140 145 150 155 DC Allowable Cas e T emperature - (°C) F( A V ) se e no te ( 2) Average F orward Current - I (A) S quare wave (D = 0.50) 80% R ated V appliedR 0.5 1.5 2.5 DC Average P ower L os s - (Watts ) F( A V) RM S Lim it D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 Average F orward Current - I (A) 100 1000 10 100 1000 10000 FSMNon-R epetitive S urge Current - I (A) At Any R ated L oad Condition And With R ated V Applied Fo llo w in g Su rg e RRM pS quare Wave Pulse Duration - t (microsec)

Bulletin PD-20521 rev. G 03/03 5www.irf.com Tape & Reel Information TR FEED DIRECTION 4.1 (0.16) 3.9 (0.15) 2.1 (0.83) 1.9 (0.07) 12.1 (0.48) 1.65 (0.06) 1.85 (0.07) 1.65 (0.06) 7.4 (0.29) 2.6 (0.10) 1.5 (0.06) 7.6 (0.30) 11.9 (0.47) 1.85 (0.07) TO-252AA Tape & Reel When ordering, indicate the part number, part orientation, and the quantity. Quantities are in multiples of 2,000 pieces per reel for TR and multiples of 3,000 pieces per reel for both TRL and TRR. 13 (0.52) DIA. DIA. MAX. 22.4 (0.88) 0.35 (0.01) 16.3 (0.64) 15.7 (0.62) 2.75 (0.11) 2.55 (0.10) 0.25 (0.01) 6.8 (0.26) 7.0 (0.28) TRR FEED DIRECTION 4.1 (0.16) 3.9 (0.15) 2.1 (0.83) 1.9 (0.07) 8.1 (0.32) 1.85 (0.07) 1.65 (0.06) 1.85 (0.07) 1.65 (0.06) 7.4 (0.29) 2.6 (0.10) 1.5 (0.06) 7.6 (0.30) 7.9 (0.31) 0.35 (0.01) 16.3 (0.64) 15.7 (0.62) 2.75 (0.11) 2.55 (0.10) 0.25 (0.01) 10.4 (0.41) 10.6 (0.42) DIA. TRL FEED DIRECTION 4.1 (0.16) 3.9 (0.15) 2.1 (0.83) 1.9 (0.07) 8.1 (0.32) 1.85 (0.07) 1.65 (0.06) 1.85 (0.07) 1.65 (0.06) 7.4 (0.29) 2.6 (0.10) 1.5 (0.06) 7.6 (0.30) 7.9 (0.31) 0.35 (0.01) 16.3 (0.64) 15.7 (0.62) 2.75 (0.11) 2.55 (0.10) 0.25 (0.01) 10.4 (0.41) 10.6 (0.42) DIA. DIA. DIA. DIA. DIA. Marking Information EXAMPLE: THIS IS AN 30WQ04FN 5K3A 30WQ04FN 712A INTERNATIONAL RECTIFIER LOGO PART NUMBER ASSEMBLY LOT CODE 4 (K) 1 (A) 3 (A) 2 (K) DATE CODE (YWWA) Y = YEAR WW = WEEK A = LINE

Bulletin PD-20521 rev. G 03/03 6 www.irf.com 30WQ04FN * This model has been developed by * * Wizard SPICE MODEL GENERATOR (1999) * * (International Rectifier Corporation) * * contains Proprietary Information * * SPICE Model Diode is composed by a * * simple diode plus paralled VCG2T * .SUBCKT 30WQ04FN ANO CAT D1 ANO 1 DMOD (0.01614) *Define diode model .MODEL DMOD D(IS=1.1021044955238E-04A,N=1.03763733127871,BV=53V, + IBV=0.225832353615935A,RS= 0.000439008,CJO=6.29671162330771E-08, + VJ=0.169606385579256,XTI=2, EG=0.72244495735053) *Implementation of VCG2T VX 1 2 DC 0V R1 2 CAT TRES 1E-6 .MODEL TRES RES(R=1,TC1=96.5402599365199) GP1 ANO CAT VALUE={-ABS(I(VX))*(EXP((((-3.005809E-03/96.54026)*((V(2,CAT)*1E6)/(I(VX)+1E-6)- 1))+1)*6.266778E-02*ABS(V(ANO,CAT)))-1)} .ENDS 30WQ04FN Thermal Model Subcircuit .SUBCKT 30WQ04FN 5 1 CTHERM1 5 4 8.75E-04 CTHERM2 4 3 5.09E+01 CTHERM3 3 2 3.62E+02 CTHERM4 2 1 2.35E+03 RTHERM1 5 4 1.00E-07 RTHERM2 4 3 2.07E+00 RTHERM1 3 2 1.92E+00 RTHERM1 2 1 7.07E-01 .ENDS 30WQ04FN IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 03/03 Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site.