30TPS08

30TPS IRF | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

30TPS.. VT < 1.3V @ 20A ITSM = 300A VRRM 800 to 1600V Major Ratings and Characteristics IT(AV) Sinusoidal 20 A waveform IRMS 30 A VRRM / VDRM up to 1600 V ITSM 300 A V T @ 20 A, TJ = 25°C 1.3 V dv/dt 500 V/µs di/dt 150 A/µs TJ - 40 to 125 °C Characteristics 30TPS.. Units TO-247AC Description/Features The 30TPS.. SAFEIR series of silicon controlled rectifiers are specifically designed for medium power switching and phase control applications. The glass passivation technology used has reli- able operation up to 125°C junction temperature. Typical applications are in input rectification (soft start) and these products are designed to be used with International Rectifier input diodes, switches and output rectifiers which are available in identi- cal package outlines. Package Outline

30TPS.. SAFEIR Series Bulletin I2136 04/97 Voltage Ratings Part Number VRRM /VDRM , max. repetitive VRSM , maximum non repetitive IRRM /IDRM peak and off-state voltage peak reverse voltage 125°C VV m A 30TPS08 800 900 10 30TPS12 1200 1300 30TPS16 1600 1700 IT(AV) Max. Average On-state Current 20 A @ T C = 95° C, 180° conduction half sine wave IRMS Max. RMS On-state Current 30 ITSM Max. Peak One Cycle Non-Repetitive 250 10ms Sine pulse, rated VRRM applied Surge Current 300 10ms Sine pulse, no voltage reapplied I2t Max. I 2t for Fusing 310 A 2s 10ms Sine pulse, rated VRRM applied 442 10ms Sine pulse, no voltage reapplied I2√t Max. I2√t for Fusing 4420 A 2√s t = 0.1 to 10ms, no voltage reapplied VTM Max. On-state Voltage Drop 1.3 V @ 20A, T J = 25°C rt On-state Slope Resistance 12 m Ω TJ = 125°C VT(TO) Threshold Voltage 1.0 V IRM /IDM Max.Reverse and Direct 0.5 mA T J = 25 °C Leakage Current 10 T J = 125 °C IH Max. Holding Current 100 mA Anode Supply = 6V, Resistive load, Initial I T=1A IL Max. Latching Current 200 mA Anode Supply = 6V, Resistive load dv/dt Max. Rate of Rise of off-state Voltage 500V/µs di/dt Max. Rate of Rise of turned-on Current 150A/µs Absolute Maximum Ratings Parameters 30TPS.. Units Conditions VR = rated VRRM / VDRM

30TPS.. SAFEIR Series Bulletin I2136 04/97 Thermal-Mechanical Specifications TJ Max. Junction Temperature Range - 40 to 125 °C Tstg Max. Storage Temperature Range - 40 to 125 R thJC Max. Thermal Resistance Junction 0.8 °C/W DC operation to Case R thJA Max. Thermal Resistance Junction 40 to Ambient R thCS Max. Thermal Resistance Case 0.2 Mounting surface, smooth and greased to Heatsink wt Approximate Weight 6 (0.21) g (oz.) T Mounting Torque Min. 6 (5) Kg-cm Max. 12 (10) (lbf-in) Case Style TO-247AC Jedec (Modified) Parameters 30TPS.. Units Conditions Triggering PGM Max. Peak Gate Power 8.0 W PG(AV) Max. Average Gate Power 2.0 + IGM Max. Peak Positive Gate Current 1.5 A - VGM Max. Peak Negative Gate Voltage 10 V IGT Max. Required DC Gate Current 60 mA Anode supply = 6V, resistive load, T J = - 10°C to Trigger 45 Anode supply = 6V, resistive load, T J = 25°C

20 Anode supply = 6V, resistive load, T J = 125°C

VGT Max. Required DC Gate Voltage 2.5 V Anode supply = 6V, resistive load, T J = - 10°C to Trigger 2.0 Anode supply = 6V, resistive load, T J = 25°C

1.0 Anode supply = 6V, resistive load, T J = 125°C

VGD Max. DC Gate Voltage not to Trigger0.25 T J = 125°C, VDRM = rated value IGD Max. DC Gate Current not to Trigger 2.0 mA T J = 125°C, VDRM = rated value Parameters 30TPS.. Units Conditions Switching Parameters 30TPS.. Units Conditions tgt Typical Turn-on Time 0.9 µs T J = 25°C trr Typical Reverse Recovery Time 4 T J = 125°C tq Typical Turn-off Time 110

30TPS.. SAFEIR Series Bulletin I2136 04/97 Fig. 1 - Current Rating Characteristics Fig. 2 - Current Rating Characteristics Fig. 3 - On-state Power Loss Characteristics Fig. 4 - On-state Power Loss Characteristics Fig. 5 - Maximum Non-Repetitive Surge Current Fig. 6 - Maximum Non-Repetitive Surge Current 100 110 120 130 0 5 10 15 20 25 30° 60° 90° 120° 180° Maximum Allowable Case Temperature (°C) Conduction Angle Average On-state Current (A) 30TPS.. Series R (DC) = 0.8 °C/WthJC 100 110 120 130 0 5 10 15 20 25 30 35 DC 30° 60° 90° 120° 180° Average On-state Current (A) Maximum Allowable Case Temperature (°C) Conduction Period 30TPS.. Series R (DC) = 0.8 °C/WthJC 0 5 10 15 20 25 30 RMS Limit Conduction Angle Maximum Average On-state Power Loss (W) Average On-state Current (A) 180° 120° 90° 60° 30° 30TPS.. Series T = 125°C J 0 1 02 03 04 05 0 DC 180° 120° 90° 60° 30° RMS Limit Conduction Period Maximum Average On-state Power Loss (W) Average On-state Current (A) 30TPS.. Series T = 125°C J 120 140 160 180 200 220 240 260 280 1 10 100 Number Of Equal Amplitude Half Cycle Current Pulses (N) At Any Rated Loa d Condition And With Rated V Applied Following Surge.RRM Peak Half Sine Wave On-state Current (A) Initial T = 125°C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s J 30TPS.. Series 120 140 160 180 200 220 240 260 280 300 0.01 0.1 1 Peak Half Sine Wave On-state Current (A) Pulse Train Duration (s) Versus Pulse Train Duration. Control Of Conduction May Not Be Maintained. Initial T = 125°C No Voltage Reapplied Rated V ReappliedRRM J 30TPS.. Series Maximum Non Repetitive Surge Current

30TPS.. SAFEIR Series Bulletin I2136 04/97 Fig. 7 - On-state Voltage Drop Characteristics Fig. 9 - GateCharacteristics Fig. 8 - Thermal Impedance ZthJC Characteristics 100 1000 01234567 T = 25°CJ Instantaneous On-state Current (A) Instantaneous On-state Voltage (V) T = 125°CJ 30TPS.. Series 0.01 0.1 0.0001 0.001 0.01 0.1 1 Square Wave Pulse Duration (s) Steady State Value (DC Operation) Single Pulse D = 0.50 D = 0.33 D = 0.25 D = 0.17 D = 0.08 30TPS.. Series Transient Thermal Impedance Z (°C/W)thJC 0.1 100 0.001 0.01 0.1 1 10 100 (b) (a) (4) (3) (2) (1) Instantaneous Gate Current (A) Instantaneous Gate Voltage (V) TJ = 25 °C TJ = 125 °C Frequency Limited by PG(AV) TJ = -10 °C IGD VGD 30TPS.. Series tr = 1 µs, tp >= 6 µs <= 30% rated di/dt: 10 V, 65 ohms b)Recommended load line for rated di/dt: 10 V, 20 ohms tr = 0.5 µs, tp >= 6 µs a)Recommended load line for Rectangular gate pulse (1) PGM = 40 W, tp = 1 ms (2) PGM = 20 W, tp = 2 ms (3) PGM = 8 W, tp = 5 ms (4) PGM = 4 W, tp = 10 ms

30TPS.. SAFEIR Series Bulletin I2136 04/97 Outline Table Dimensions in millimeters and inches 15.90 (0 .626 ) 15.30 (0 .602 ) 14 .20 (0 .559) 14.80 (0.583) 3.70 (0.145) 4.30 (0.170) 5.30 (0.208) 5.70 (0.225) 5.50 ( 0.217) 4. 50 (0.17 7) (2 PLCS.) 3.55 (0.139) 3.65 (0.144) 2.20 (0.087) MAX. 1.00 (0.039) 1.40 (0.056) 0.40 (0.213) 0.80 (0.032) 4.70 (0.185) 5.30 (0.209) 1.5 (0.059) 2.5 (0.098) 2.40 (0.095) MA X. 10 .86 (0.427) 10. 94 ( 0.430) 20 .30 (0.800) 19 .70 (0.775) DIA. 12 3 Ordering Information T able

30 T P S 16

2 - Circuit Configuration: T = Thyristor T = TO-247 4 - Type of Silicon: S = Standard Recovery Rectifier 5 - Voltage code: Code x 100 = VRRM (G) 3 (A) 1 (K) 08 = 800V 12 = 1200V 16 = 1600V