30CTQ050SPBF

30CTQ060STRLPBF IRF | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

Bulletin PD-21018 rev. A 07/06 1www.irf.com This center tap Schottky rrectifier has been optimized for very low forward voltage drop, with moderate leakage. The proprietary barrier technology allows for reliable operation up to 150° C junction temperature. Typical applications are in switching power supplies, converters, free-wheeling diodes, and reverse battery protection. 150° C TJ operation Center tap configuration Very low forward voltage drop High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance High frequency operation Guard ring for enhanced ruggedness and long term reliability Lead-Free ("PbF" suffix) Description/ FeaturesMajor Ratings and Characteristics IF(AV) Rectangular 30 A waveform VRRM 50 - 60 V IFSM @ tp = 5 μs sine 1000 A VF @ 15 Apk, TJ = 125°C 0.56 V (per leg) TJ range - 55 to 150 °C Characteristics Values Units IF(AV) = 30Amp VR = 50 - 60V 30CTQ...SPbF 30CTQ...-1PbF Case Styles D2PAK 30CTQ...SPbF 30CTQ...-1PbF TO-262 Anode 1 3 Base Common Cathode Anode Common Cathode Anode 1 3 Base Common Cathode Anode Common Cathode

Bulletin PD-21018 rev. A 07/06 www.irf.com IF(AV) Max. Average Forward (Per Leg) 15 A 50% duty cycle @ TC = 105°C, rectangular wave form Current * See Fig. 5 (Per Device) 30 IFSM Max. Peak One Cycle Non-Repetitive 1000 5 μs Sine or 3μs Rect. pulse Surge Current (Per Leg) * See Fig. 7 260 10ms Sine or 6ms Rect. pulse EAS Non-Repetitive Avalanche Energy 13 mJ T J = 25 °C, IAS = 1.50 Amps, L = 11.5 mH (Per Leg) IAR Repetitive Avalanche Current 1.50 A Current decaying linearly to zero in 1 μsec (Per Leg) Frequency limited by T J max. VA = 1.5 x VR typical TJ Max. Junction Temperature Range -55 to 150 °C Tstg Max. Storage Temperature Range -55 to 150 °C RthJC Max. Thermal Resistance Junction 3.25 °C/W DC operation to Case (Per Leg) RthJC Max. Thermal Resistance Junction 1.63 °C/W DC operation to Case (Per Package) RthCS Typical Thermal Resistance, Case 0.50 °C/W Mounting surface , smooth and greased to Heatsink wt Approximate Weight 2 (0.07) g (oz.) T Mounting Torque Min. 6 (5) Max. 12 (10) Marking Device 30CTQ...S Case style D 2Pak 30CTQ...-1 Case style TO-262 Absolute Maximum Ratings Parameters Values Units Conditions A Thermal-Mechanical Specifications Kg-cm (Ibf-in) Parameters Values Units Conditions VFM Max. Forward Voltage Drop 0.62 V @ 15A (Per Leg) * See Fig. 1 (1) 0.82 V @ 30A

0.56 V @ 15A

0.71 V @ 30A

IRM Max. Reverse Leakage Current 0.80 mA T J = 25 °C (Per Leg) * See Fig. 2 (1) 45 mA T J = 125 °C VF(TO) Threshold Voltage 0.39 V TJ = TJ max. rt Forward Slope Resistance 8.47 mΩ CT Max. Junction Capacitance(Per Leg) 720 pF V R = 5VDC (test signal range 100Khz to 1Mhz) 25°C LS Typical Series Inductance (Per Leg) 8.0 nH Measured lead to lead 5mm from package body dv/dt Max. Voltage Rate of Change 10000 V/ μs (Rated V R) TJ = 25 °C TJ = 125 °C Electrical Specifications (1) Pulse Width < 300μs, Duty Cycle <2% VR = rated VR Parameters Values Units Conditions Following any rated load condition and with rated V RRM applied 30CTQ050SPbF 30CTQ060SPbF 30CTQ050-1PbF 30CTQ060-1PbF VR Max. DC Reverse Voltage (V) VRWM Max. Working Peak Reverse Voltage (V) 50 60 Voltage Ratings Parameters

Bulletin PD-21018 rev. A 07/06 www.irf.com Fig. 2 - Typical Values Of Reverse Current Vs. Reverse Voltage (Per Leg) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage (Per Leg) Fig. 4 - Max. Thermal Impedance ZthJC Characteristics (Per Leg) Fig. 1 - Max. Forward Voltage Drop Characteristics (Per Leg) 100 1000 0 0.4 0.8 1.2 1.6 2 F FM T = 150°C T = 125°C T = 25°C J J J F orwar d Voltage Dr op - V (V) Ins tanta neous Forward Current - I (A) 0.001 0.01 0.1 100 1000 0 1 02 03 04 05 06 0 R R 125°C 100°C 75°C 50°C 25°C Revers e Current - I (mA) T = 150°CJ Revers e Voltage - V (V) 100 1000 0 1 02 03 04 05 06 0 R TJuncti on Capacitance - C (pF ) R evers e Voltage - V (V) T = 25°CJ 0.001 0.01 0.1 thJC t , R ectangular P uls e D urati on (S econds ) S ingle Pulse ( Th e rm a l Re sist a n c e ) T hermal I mpedance Z (°C/W) Notes: 1. Duty factor D = t / t 2. Peak T = P x Z + T 1 2 J thJC CDM D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 PDM

Bulletin PD-21018 rev. A 07/06 www.irf.com Fig. 8 - Unclamped Inductive Test Circuit FREE- WHEEL DIODE 40HF L40S02C URRENT MONIT OR HIG H- SPEED S WIT CHIRFP460 L DUT R g = 25 ohm Vd = 25 Volt+ (2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = 10 V Fig. 7 - Max. Non-Repetitive Surge Current (Per Leg) Fig. 5 - Max. Allowable Case Temperature Vs. Average Forward Current (Per Leg) Fig. 6 - Forward Power Loss Characteristics (Per Leg) 100 110 120 130 140 150 160 0 5 10 15 20 25 DC Allowable Cas e T emper ature - (°C) F( A V) see note ( 2) Sq ua re wa ve (D = 0.50) 8 0% R ated V appl i ed Average F orward Current - I (A) R 0 5 10 15 20 25 DC Average P ower L os s - (Watts ) F (AV) RM S Li m it D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 Average F orwar d Cur rent - I (A) 100 1000 10 100 1000 10000 FSMNon-R epetitive Surge Current - I (A) p At Any R ated Load Condition And With Rated V Applied Following S urge RRM S quare Wave P uls e Duration - t (micros ec)

Bulletin PD-21018 rev. A 07/06 www.irf.com Modified JEDEC outline TO-262 Dimensions in millimeters and (inches) Conform to JEDEC outline D2Pak (SMD-220) Dimensions in millimeters and (inches) Outlines Table

Bulletin PD-21018 rev. A 07/06 www.irf.com ASSEMBLY LOT CODE INTERNATIONAL RECTIFIER LOGOLOT CODE 1789 ASSEMBLED ON WW 19, 1999 EXAMPLE: P = LEAD-FREE PART NUMBER WEEK 19 DATE CODE YEAR 9 = 1999 THIS IS A 430CTQ060-1 30CTQ060S THIS IS A 30CTQ060S LOT CODE 8024 ASSEMBLED ON WW 02, 2000 ASSEMBLY LOT CODE LOGO INTERNATIONAL RECTIFIER P = LEAD-FREE DATE CODE YEAR 0 = 2000 WEEK 02 PART NUMBER Part Marking Information D2PAK TO-262 Dimensions in millimeters and (inches) Tape & Reel Information

Bulletin PD-21018 rev. A 07/06 www.irf.com Ordering Information Table IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 07/06 Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level and Lead-Free. Qualification Standards can be found on IR's Web site.

30 C T Q 060 S TRL PbF

1 - Current Rating (30A) 2 - Circuit Configuration C = Common Cathode 3 - T = TO-220 4 - Schottky "Q" Series 5 - Voltage Ratings 6 - y S = D 2Pak y -1= TO-262 7 - y none = Tube (50 pieces) y TRL = Tape & Reel (Left Oriented - for D 2Pak only) y TRR = Tape & Reel (Right Oriented - for D 2Pak only) 8 - y none = Standard Production y PbF = Lead-Free 7 8 050 = 50V 060 = 60V