30CTQ050

30CTQ050 IRF | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

PD-2.300 rev. B 04/99 1www.irf.com This center tap Schottky rrectifier has been optimized for very low forward voltage drop, with moderate leakage. The proprietary barrier technology allows for reliable operation up to 150° C junction temperature. Typical applications are in switching power supplies, converters, free-wheeling diodes, and reverse battery protection. 150° C T J operation Center tap configuration Very low forward voltage drop High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance High frequency operation Guard ring for enhanced ruggedness and long term reliability Description/Features Case Styles TO-220 D 2PAK TO-262 30CTQ... 30CTQ...S 30CTQ...-1 Major Ratings and Characteristics IF(AV) Rectangular 30 A waveform VRRM 50 / 60 V IFSM @ tp = 5 µs sine 1000 A VF @ 20 Apk, TJ = 125°C 0.56 V (per leg) TJ range - 55 to 150 °C Characteristics Values Units

PD-2.300 rev. B 04/99 www.irf.com 30CTQ050 30CTQ060 30CTQ050S 30CTQ060S 30CTQ050-1 30CTQ060-1 VR Max. DC Reverse Voltage (V) VRWM Max. Working Peak Reverse Voltage (V) 50 60 Voltage Ratings Parameters Absolute Maximum Ratings Parameters Values Units Conditions IF(AV) Max. Average Forward (Per Leg) 15 A 50% duty cycle @ T C = 105°C, rectangular wave form Current * See Fig. 5 (Per Device) 30 IFSM Max. Peak One Cycle Non-Repetitive1000 5µs Sine or 3µs Rect. pulse Surge Current (Per Leg) * See Fig. 7 260 10ms Sine or 6ms Rect. pulse EAS Non-Repetitive Avalanche Energy 13 mJ T J = 25 °C, IAS = 1.50 Amps, L = 11.5 mH (Per Leg) IAR Repetitive Avalanche Current 1.50 A Current decaying linearly to zero in 1 µsec (Per Leg) Frequency limited by T J max. VA = 1.5 x VR typical A TJ Max. Junction Temperature Range -55 to 150 °C Tstg Max. Storage Temperature Range -55 to 150 °C RthJC Max. Thermal Resistance Junction 3.25 °C/W DC operation to Case (Per Leg) RthJC Max. Thermal Resistance Junction 1.63 °C/W DC operation to Case (Per Package) RthCS Typical Thermal Resistance, Case 0.50 °C/W Mounting surface , smooth and greased to Heatsink (only for TO-220) wt Approximate Weight 2 (0.07) g (oz.) T Mounting Torque Min. 6 (5) Max. 12 (10) Thermal-Mechanical Specifications Kg-cm (Ibf-in) Parameters Values Units Conditions VFM Max. Forward Voltage Drop 0.62 V @ 15A (Per Leg) * See Fig. 1 (1) 0.82 V @ 30A

0.56 V @ 15A

0.71 V @ 30A

IRM Max. Reverse Leakage Current 0.80 mA T J = 25 °C (Per Leg) * See Fig. 2 (1) 45 mA T J = 125 °C VF(TO) Threshold Voltage 0.39 V TJ = TJ max. rt Forward Slope Resistance 8.47 m Ω CT Max. Junction Capacitance (Per Leg) 720 pF V R = 5VDC , (test signal range 100Khz to 1Mhz) 25°C LS Typical Series Inductance (Per Leg) 8.0 nH Measured lead to lead 5mm from package body dv/dt Max. Voltage Rate of Change 10,000 V/ µs (Rated VR ) TJ = 25 °C TJ = 125 °C Electrical Specifications (1) Pulse Width < 300µs, Duty Cycle <2% VR = rated VR Parameters Values Units Conditions Following any rated load condition and with rated V RRM applied

PD-2.300 rev. B 04/99 www.irf.com Fig. 2 - Typical Values Of Reverse Current Vs. Reverse Voltage (Per Leg) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage (Per Leg) Fig. 4 - Max. Thermal Impedance ZthJC Characteristics (Per Leg) Fig. 1 - Max. Forward Voltage Drop Characteristics (Per Leg) 100 1000 0 0.4 0.8 1.2 1.6 2 F FM T = 150°C T = 125°C T = 25°C J J J Forward Voltage Drop - V (V) Instantaneous Forward Current - I (A) 0.001 0.01 0.1 100 1000 0 1 02 03 04 05 06 0 R R 125°C 100°C 75°C 50°C 25°C Reverse Current - I (mA) T = 150°CJ Reverse Voltage - V (V) 100 1000 0 1 02 03 04 05 06 0 R TJunction Capacitance - C (pF) Reverse Voltage - V (V) T = 25°CJ 0.001 0.01 0.1 thJC t , Rectangular Pulse Duration (Seconds) Single Pulse (Thermal Resistance) Thermal Impedance Z (°C/W) Notes: 1. Duty factor D = t / t 2. Peak T = P x Z + T 1 2 J thJC CDM D = 0. 75 D = 0. 50 D = 0. 33 D = 0. 25 D = 0.20 PDM

PD-2.300 rev. B 04/99 www.irf.com Fig. 8 - Unclamped Inductive Test Circuit FREE-WHEEL DIODE 40HFL40S02CURRENT MONITOR HIGH-SPEED SWITCHIRFP460 L DUT Rg = 25 ohm Vd = 25 Volt+ (2)Formula used: TC = TJ - (Pd + PdREV ) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6); Pd REV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = 10 V Fig. 7 - Max. Non-Repetitive Surge Current (Per Leg) Fig. 5 - Max. Allowable Case Temperature Vs. Average Forward Current (Per Leg) Fig. 6 - Forward Power Loss Characteristics (Per Leg) 100 110 120 130 140 150 160 0 5 10 15 20 25 DC Allowable Case Temperature - (°C) F(AV) see note (2) Square wave (D = 0.50) 80% Rated V applied Average Forward Current - I (A) R 0 5 10 15 20 25 DC Average Power Loss - (Watts) F(AV) RMS Limit D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 Average Forward Current - I (A) 100 1000 10 100 1000 10000 FSMNon-Repetitive Surge Current - I (A) p At Any Rated Load Condition And With Rated V Applied Following Surge RRM Square Wave Pulse Duration - t (microsec)

PD-2.300 rev. B 04/99 www.irf.com 3.78 (0.15) 3.54 (0.14) 10.54 (0.41) MAX. DIA. 15.24 (0.60) 14.84 (0.58) 2.92 (0.11) 2.54 (0.10) TERM 2 14.09 (0.55) 13.47 (0.53) 3.96 (0.16) 3.55 (0.14) 0.94 (0.04) 0.69 (0.03) 4.57 (0.18) 4.32 (0.17) 3 0.61 (0.02) MAX. 5.08 (0.20) REF. 1.32 (0.05) 1.22 (0.05) 6.48 (0.25) 6.23 (0.24) 0.10 (0.004) 1.40 (0.05) 1.15 (0.04) 2.89 (0.11) 2.64 (0.10) 2.04 (0.080) MAX. Dimensions in millimeters and (inches) Conform to JEDEC outline TO-220AB BASE COMM ON CAT HODE 12 3 ANODECOMM ON CAT HODE ANODE Ordering Information Table Device Code 1 524 3 1 - Essential Part Number 2 - C = Common Cathode 3 - T = TO-220 4 - Q = Schottky Q Series 5 - Voltage Rating 6 - 1 = TO-262 S= D 2Pak

30 C T Q 060 -1

050 = 50V 060 = 60V

PD-2.300 rev. B 04/99 www.irf.com TRR FEED DIRECTION TRL FEED DIRECTION 10.90 (0.429) 15.90 (0.626) 1.75 (0.069) 1.25 (0.049) 1.85 (0.073) 1.65 (0.065) 4.10 (0.161) 3.90 (0.153) 1.60 (0.063) 1.50 (0.059) DIA. 1.60 (0.063) 1.50 (0.059) DIA. 11.60 (0.457) 11.40 (0.449) 15.42 (0.609) 15.22 (0.601) 4.72 (0.186) 4.52 (0.178) 24.30 (0.957) 23.90 (0.941) 0.368 (0.0145) 0.342 (0.0135) 360 (14.173) DIA. MAX. 26.40 (1.039) 24.40 (0.961) 13.50 (0.532) 12.80 (0.504)DIA. 60 (2.362) DIA. MIN. SMD-220 Tape & Reel When ordering, indicate the part number, part orientation, and the quantity. Quantities are in multiples of 800 pieces per reel for both TRL and T RR. 10.16 (0.40) REF. 8.89 (0.35) 4.57 (0.18) 4.32 (0.17) 0.61 (0.02) MAX. 5.08 (0.20) REF. 1.32 (0.05) 1.22 (0.05) 6.47 (0.25) 6.18 (0.24)93° RE F. 2.61 (0.10) 2.32 (0.09) 5.28 (0.21) 4.78 (0.19) 4.69 (0.18) 4.20 (0.16) 0.55 (0.02) 0.46 (0.02) 14.73 (0.58) 15.49 (0.61) 1.40 (0.055) 1.14 (0.045)3X 0.93 (0.37) 0.69 (0.27)2X 11.43 (0.45) 17.78 (0.70) 8.89 (0.35) 3.81 (0.15) 2.08 (0.08) 2X 2.54 (0.10) MINIMUM RECOMMENDED FO OTPRINT Dimensions in millimeters and (inches) Tape & Reel Information Outline Table Dimensions in millimeters and (inches) Conform to JEDEC outline D2Pak (SMD-220) BASE COMM ON CAT HOD E 12 3 ANODECOMM ON CAT HOD E ANODE

PD-2.300 rev. B 04/99 www.irf.com EUROPEAN HEADQUARTERS: Hurst Green, Oxted, Surrey RH8 9BB, U.K. Tel: ++ 44 1883 732020. Fax: ++ 44 1883 733408. IR CANADA: 15 Lincoln Court, Brampton, Markham, Ontario L6T3Z2. Tel: (905) 453 2200. Fax: (905) 475 8801. IR GERMANY: Saalburgstrasse 157, 61350 Bad Homburg. Tel: ++ 49 6172 96590. Fax: ++ 49 6172 965933. IR ITALY:Via Liguria 49, 10071 Borgaro, Torino. Tel: ++ 39 11 4510111. Fax: ++ 39 11 4510220. IR FAR EAST:K&H Bldg., 2F, 30-4 Nishi-Ikebukuro 3-Chome, Toshima-Ku, Tokyo, Japan 171. Tel: 81 3 3983 0086. IR SOUTHEAST ASIA: 1 Kim Seng Promenade, Great World City West Tower,13-11, Singapore 237994. Tel: ++ 65 838 4630. http://www.irf.com Fax-On-Demand: +44 1883 733420 Data and specifications subject to change without notice. Outline Table Dimensions in millimeters and (inches) Modified JEDEC outline TO-262 BASE COMMON CATHODE 123 ANODECOMMON CATHODE ANODE 1 2