30CLJQ100 IRF | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

30 Amp, 100V

Major Ratings and Characteristics Description/Features 08/10/01 CASE STYLE IR Case Style SMD-0.5 www.irf.com 1 Characteristics 30CLJQ100 Units IF(AV) 30 A VRRM (Per Leg) 100 V IFSM @ tp = 8.3ms half-sine (Per Leg) 100 A VF @ 30Apk, TJ =125°C 0.95 V (Per Leg) TJ, Tstg Operating and storage-55 to 150 °C ANODE COMMON ANODE CATHODE 2 13 HIGH EFFICIENCY SERIES The 30CLJQ100 center tap Schottky rectifier has been expressly designed to meet the rigorous requirements of hi- rel environments. It is packaged in the hermetic surface mount SMD-0.5 ceramic package. The device's forward voltage drop and reverse leakage current are optimized for the lowest power loss and the highest circuit efficiency for typical high frequency switching power supplies and resonent power converters. Full MIL-PRF-19500 quality conformance testing is available on source control drawings to TX, TXV and S quality levels.  Hermetically Sealed  Center Tap  Low Forward Voltage Drop  High Frequency Operation  Guard Ring for Enhanced Ruggedness and Long term Reliability  Surface Mount  Lightweight PD -94085A

2 www.irf.com Part number 30CLJQ100 VR Max. DC Reverse Voltage (V) (Per Leg) VRWM Max. Working Peak Reverse Voltage (V) (Per Leg) Voltage Ratings 100 Parameters Limits Units Conditions IF(AV) Max. Average Forward Current 30 A 50% duty cycle @ T C = 64°C, square waveform See Fig. 5 IFSM Max. Peak One Cycle Non - Repetitive 100 A @ tp = 8.3 ms half-sine Surge Current (Per Leg) Absolute Maximum Ratings Parameters Limits Units Conditions VFM Max. Forward Voltage Drop 0.86 V @ 5.0A (Per Leg) See Fig. 1/G81 1.18 V @ 15A T J = -55°C

1.43 V @ 30A

0.77 V @ 5.0A

1.03 V @ 15A T J = 25°C

1.27 V @ 30A

0.60 V @ 5.0A

0.77 V @ 15A T J = 125°C

0.95 V @ 30A

IRM Max. Reverse Leakage Current 0.01 mA T J = 25°C (Per Leg) See Fig. 2/G81 1.19 mA T J = 100°CV R = rated VR 5.0 mA T J = 125°C CT Max. Junction Capacitance (Per Leg) 215 pF V R = 5VDC ( 1MHz, 25°C ) LS Typical Series Inductance (Per Leg) 4.8 nH Measured from center of cathode pad to center of anode pad Electrical Specifications /G81 Pulse Width < 300µs, Duty Cycle < 2% Parameters Limits Units Conditions TJ Max.Junction Temperature Range -55 to 150 °C Tstg Max. Storage Temperature Range -55 to 150 °C R thJC Max. Thermal Resistance, Junction 3.5 °C/W DC operation See Fig. 4 to Case (Per Leg) R thJC Max. Thermal Resistance, Junction 1.75 °C/W DC operation to Case (Per Package) wt Weight (Typical) 1.0 g Die Size (Typical) 70X92 mils Thermal-Mechanical Specifications Case Style SMD-0.5

www.irf.com 3 Fig. 2 - Typical Values of Reverse Current Vs. Reverse Voltage (Per Leg) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage (Per Leg) Fig. 1 - Max. Forward Voltage Drop Characteristics (Per Leg) 0 20 40 60 80 100 Reverse Voltage -VR (V) 100 1000 Junction Capacitance - C T (pF) TJ = 25°C 0 20 40 60 80 100 Reverse Voltage - VR (V) 0.0001 0.001 0.01 0.1 Reverse Current - I R ( mA ) 125°C 75°C 25°C 100°C Forward Voltage Drop - VF (V) 100 Instantaneous Forward Current - I F (A) Tj = -55°C Tj = 125°C Tj = 25°C

4 www.irf.com Fig. 5 - Max. Allowable Case Temperature Vs. Average Forward Current (Per Leg) Fig. 4 - Max. Thermal Impedance ZthJC Characteristics (Per Leg) IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information. Data and specifications subject to change without notice. 08/01 0.01 0.1 /G20 Notes: 1. Duty factor D =t / t 2. Peak T= P x Z + T 1 2 J DM thJC C /G20 P t t DM t , Rectangular Pulse Duration (sec) Thermal Response(Z ) thJC 0.01 0.02 0.05 0.10 0.20 D = 0.50 /G20 SINGLE PULSE (THERMAL RESPONSE) 0 10 20 30 40 50 Average Forward Current - IF(AV) (A) 100 120 140 160 180 Allowable Case Temprature - ( °C) 30CLJQ100 R thJC = 3.5°C/W DC