3094R_10 API | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
Micro i ® Chip Inductors SRF MINIMUM (MHz) DASH NUMBER* MIL DASH # (Reference) Q MINIMUM TEST FREQUENCY (MHz) DC RESISTANCE MAXIMUM (OHMS) CURRENT RATING MAXIMUM (mA) INDUCTANCE (µH) ±10% RF Inductors 270 Q uaker R d., E ast Aurora N Y 14052 • Phone 716-652-3600 • Fax 716-652-48 14 • E -m ail: apisales@ delevan .com • w w w.delevan.com M83446/10– (Reference) SERIES 3094 IRON CORE -100K S -120K S -150K S -18 0K S -220K S -270K S -330K S -390K S -470K S -560K S -68 0K S -8 20K S -101K S -121K S -151K S -18 1K S -221K S -271K S -331K S -391K S -471K S -561K S -68 1K S -8 21K S -102K S -122K S -152K S -18 2K S -222K S -272K S -332K S -392K S -472K S -562K S -68 2K S -8 22K S -103K S -123K S -153K S -18 3K S -223K S -273K S -333K S -393K S -473K S -563K S -68 3K S -8 23K S -104K S -124K S -154K S -18 4K S -224K S -274K S -334K S -394K S -474K S -564K S -68 4K S -8 24K S -105K S 1000 1000 1000 1000 1000 1000 1000 900 900 900 8 40 8 40 8 40 8 40 790 790 790 700 700 700 590 510 430 400 38 0 330 290 260 230 210 200 18 0 170 160 140 130 120 118 115 114 113 110 100 8 4 0.040 0.040 0.040 0.040 0.050 0.050 0.050 0.060 0.060 0.060 0.070 0.070 0.070 0.070 0.08 0 0.08 0 0.08 0 0.10 0.10 0.10 0.14 0.19 0.26 0.30 0.34 0.45 0.57 0.72 0.90 1.10 1.20 1.40 1.60 1.8 0 2.40 3.00 3.50 3.60 3.70 3.8 0 3.90 4.00 5.00 7.00 8 .00 10.0 11.0 12.0 13.0 14.0 16.0 18 .0 24.0 25.0 29.0 32.0 35.0 45.0 55.0 70.0 8 0.0 2000.0 18 00.0 1500.0 1500.0 1300.0 1300.0 1000.0 1000.0 8 00.0 760.0 700.0 650.0 570.0 520.0 400.0 360.0 320.0 270.0 240.0 220.0 190.0 170.0 160.0 150.0 130.0 120.0 110.0 100.0 8 0.0 60.0 50.0 45.0 42.0 40.0 37.0 34.0 29.0 27.0 22.0 17.0 16.0 15.0 14.0 13.0 12.0 11.0 10.0 9.0 8 .0 7.0 6.0 5.0 4.0 3.3 3.1 2.9 2.4 2.1 1.9 1.8 1.7 150 150 150 150 100 100 100 100 100 100 100 100 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.08 2 0.100 0.120 0.150 0.18 0 0.220 0.270 0.330 0.390 0.470 0.560 0.68 0 0.8 20 1.00 1.20 1.50 1.8 0 2.20 2.70 3.30 3.90 4.70 5.60 6.8 0 8 .20 10.0 12.0 15.0 18 .0 22.0 27.0 33.0 39.0 47.0 56.0 68 .0 8 2.0 100.0 120.0 150.0 18 0.0 220.0 270.0 330.0 390.0 470.0 560.0 68 0.0 8 20.0 1000.0 8 0 8 1 8 2 8 3 8 4 8 5 8 6 8 7 8 8 8 9 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 Physical Parameters Inches M illim eters A 0.140 M ax. 3.56 M ax. B 0.147 to 0.163 3.73 to 4.14 C 0.117 to 0.133 2.97 to 3.38 D 0.070 M in. 1.78 M in. E 0.017 to 0.033 0.43 to 0.8 4 Current Rating at 90°C Ambient 35°C R ise O perating Tem perature R ange –55°C to +125°C M axim um Pow er D issipation at 90°C 0.155 W Inductance tolerance desired is specified by suffixing an alpha character to the part num ber: F = 1% , G = 2% , H = 3% , J = 5% , K = 10% , and M = 20% . Standard series tolerance is ±10% . For inductance values less than .10µH, m inim um tolerance is ±5% . Termination Standard: Tin/Lead Sn63 Mechanical Configuration U nits are epoxy encapsulated. C ontact area for reflow are solder coated. Internal connections are therm al com pression bonded. Notes 1) D esigned specifically for reflow soldering and other high tem perature processes w ith m etalized edges to exhibit solder fillet. 2) Self R esonant Frequency (SR F) values 270 M Hz and above are calculated and for reference only. 3) O ptional m arking is available. Packaging Tape & reel (12m m ): 7" reel, 650 pieces m ax.; 13" reel, 2500 pieces m ax. M IL-PR F-8 3446/10 (R eference) M ade In the U .S.A . *C om plete part # m ust include series # PLU S the dash # For surface finish inform ation, refer to w w w.delevanfinishes.com API_newlayouts_single:APIcatalog_newlayouts 7/23/10 10:02 AM Page 12