155PMC700KP2 ILLINOISCAPACITOR | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
- Switching capacitor for industrial controls
- Motor Speed Controls
- SMPS
- Resonant circuit
- Induction Heaters
- High frequency
- High current Operating Temperature Range Capacitance Tolerance +/- 10% at 1kHz, 20˚C Dissipation Factor (max) at 20˚C. Insulation Resistance @20˚C(<70% RH) for 1 minute at 100VDC Peak Current - Ipeak (Non-repetitive) Dielectric Strength 200% of rated VDC for 10 seconds at 20°C between leads, 3KV at 60Hz for 60 seconds between leads and case. Self inductance <1nH/mm along capacitor pitch. Capacitance drift <1.0% up to 40˚C after 2 years Temperature Coefficient -200ppm/˚C +/- 100ppm/˚C Life Expectancy ≥ 30,000 hours @VAC at 70°C Capacitance change (typical) -5% ≥100,000 hours @ WVDC at 70°C Failure rate 300/billion component hours Dielectric Polypropylene Electrodes Vacuum deposited metal layers Construction Metallized film Leads Copper leads. Coating Solvent resistant plastic box (UL 94V-1) with epoxy end fills (UL 94V-0) 250 330 400 600 700 400 500 600 800 1000 160 200 250 330 400 VDC SVDC VAC Rated Voltage Freq (kHz) C≤ 5µF 5µF<C≤25µF C>25µF 1 .05% .08% .1% -40˚C to +85˚C >30,000MΩ x µF not to exceed 30,000MΩ Ipeak = 1.5*C*dv/dt Maximum 3757 W. Touhy Ave., Lincolnwood, IL 60712 • (847) 675-1760 • Fax (847) 673-2850 • www.illcap.com
3757 W. Touhy Ave., Lincolnwood, IL 60712 • (847) 675-1760 • Fax (847) 673-2850 • www.illcap.com PMC +85°C Metallized Polypropylene Film Capacitors PHYSICAL DIMENSIONS Convert to inches, divide by 25.4 LxHxT (mm) STANDARD PART LISTING µF 250 330 400 600 700 WVDC(VAC) 2 700 205PMC700K#P2 70 16 3.8 42.5x27.5x24.5 3 600 305PMC600K#P2 55 17 3.4 42.5x27.5x24.5 3 700 305PMC700K#P1 70 21.5 3 42.5x35.5x33.5 4 400 405PMC400K#P2 40 17 3.2 42.5x27.5x24.5 4 600 405PMC600K#P1 55 23 2.6 42.5x35.5x33.5 4 700 405PMC700K#P0 70 25.5 2.5 42.5x45x33 4.7 700 475PMC700K# 70 27 2.2 42.5x45x33 5 600 505PMC600K#P1 55 24 2.4 42.5x35.5x33.5 5 700 505PMC700K#P0 70 27 2.2 42.5x45x33 6.8 600 685PMC600K#P0 55 27.5 2.1 42.5x45x33 8 700 805PMC700K# 40 25.5 3.5 57.5x50x35 9 600 905PMC600K#P0 55 30 1.8 42.5x45x33 9 700 905PMC700K# 40 26.5 3.2 57.5x50x35 10 250 106PMC250K#P2 25 19 2.6 42.5x27.5x24.5 10 400 106PMC400K#P1 40 25.5 2 42.5x35.5x33.5 Typical ESR mΩ 100kHz, +25°C Maximum RMS Ripple Current @100kHz, +70°C (A) 1.5 42.5x27.5x24.5 2 42.5x27.5x24.5 8 57.5x50x35 9 42.5x45x33 57.5x50x35 12.5 42.5x45x33 57.5x50x35 30 42.5x45x33 57.5x45x30 33 42.5x45x33 35 42.5x45x33 57.5x50x35 40 57.5x50x35 50 57.5x50x35 60 57.5x50x35 10 600 106PMC600K# 30 23.5 3.8 57.5x45x30 12.5 400 126PMC400K#P0 40 29 1.9 42.5x45x33 12.5 600 126PMC600K# 30 26 3.3 57.5x50x35 15 330 156PMC330K# 30 26.5 2 42.5x35.5x33.5 15 400 156PMC400K#P0 40 30 1.8 42.5x45x33 15 600 156PMC600K# 30 27.5 3 57.5x50x35 20 250 206PMC250K#P1 25 27 1.9 42.5x35.5x33.5 20 330 206PMC330K# 30 29.5 1.8 42.5x45x33 20 400 206PMC400K# 20 26.5 2.8 57.5x45x30 22 330 226PMC330K# 30 30.5 1.7 42.5x45x33 22 400 226PMC400K# 20 29 2.7 57.5x50x35 25 250 256PMC250K#P1 25 28 1.8 42.5x35.5x33.5 25 330 256PMC330K# 17 26.5 2.7 57.5x45x30 25 400 256PMC400K# 20 30 2.5 57.5x50x35 30 250 306PMC250K#P0 25 30 1.7 42.5x45x33 30 330 306PMC330K# 17 27.5 2.6 57.5x45x30 33 250 336PMC250K# 25 31 1.7 42.5x45x33 35 250 356PMC250K#P0 25 31 1.7 42.5x45x33 35 330 356PMC330K# 17 31 2.3 57.5x50x35 40 330 406PMC330K# 17 32.5 2.1 57.5x50x35 50 250 506PMC250K# 15 33 2.1 57.5x50x35 60 250 606PMC250K# 15 34.5 1.9 57.5x50x35 Dimensions LxHxT (mm) Capacitance (µF) WVDC PART NUMBER dv/dt (v/µs) Typical ESR mΩ 100kHz, +25°C Maximum RMS Ripple Current @100kHz, +70°C (A) Dimensions LxHxT (mm) Capacitance (µF) WVDC PART NUMBER dv/dt (v/µs)
3757 W. Touhy Ave., Lincolnwood, IL 60712 • (847) 675-1760 • Fax (847) 673-2850 • www.illcap.com PMB, PMC STYLE DRAWINGS Direct Mount Lug Termination Styles Style S / T Style B (Not available for L=57.5 mm) Style V/ W Style F/G 7±0.2 7±0.2 13.7±0.3 0.8±0.1 0.8±0.1 0.8±0.1 0.6±0.4 13.7±0.3 6±1 17.2 max. 56.5 max. 6 min. 6 min. 6 min. 5.5±1 0.8 ±0.1 7±0.2 10 max. H B H L H B BL L L B 6±1 H 17.5 max. BL 11 min. 10±0.2 5±0.2 13.7±0.3 6 min. 5.5±1 20±1.5 7±0.2 L 0.8 ±0.1 B 2.3 max. H Style N (for L=57.5 mm only) Style P (for L=57.5 mm only) Dimensions in mm Style A 7±0.2 7±0.2 13.7±0.3 17.2 max. 6 min. L 0.8±0.1 6±1 H 10 max. B 18.5 max. 14±0.28 min 6±1 2.3 max. 0.8±0.1 6 min. H 20±1.5 13.7±0.3 7±0.2 Fixing pitch and distance between lugs (mm) Lugs L P1 P2 S, V, F T, W, G N, P A B 42.5 23 ÷28 (M6) 11 57.5 37 ÷42 (M6) 24 42.5 20 ÷25 (M6) 8 57.5 34 ÷39 (M6) 21
42.5 Not available
57.5 23 ÷28 (M6) 11 42.5 51 ÷64 (M8) - 57.5 65 ÷78 (M8) - 42.5 32 ÷45 (M6) 17