DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

TE logo and Tyco Electronics are trademarks. *Trademark. Other products, logos, and company names used are the property of their respective owners. This controlled document is subject to change.

04 JAN 10 Rev C69303- 2, and 69820

(408- -series) or customer manual (409- -series) listed.

626 Pneumatic Tooling Assembly

before crimping any splices. provided in Section 8, REVISION SUMMARY. (moving die) and an insert anvil (stationary die). supplied with the applicable crimper or adapter. Section 5 for proper adjustment.

  1. Select proper wire combinations as stated in the

Figure 2. Strip wires to length indicated in Figure 2. Do not use wires with nicked or missing strands. strip length must be maintained after twisting.

  1. Insert the splice, wire barrel first, into the ejector

Figure 3. Close dies until splice is held in place.

  1. Insert stripped wires into splice wire barrel until

conductors bottom. See Figure 3.

408- 1634Die Assemblies 45218, 45221, 69303- 2, and 69820 5 of 6Rev C Tyco Electronics Corporation Die Assembly 45218 Die Assembly 45221 Die Assembly 69303-2 Die Assembly 69820 Figure 8 (Cont’d)

408- 1634Die Assemblies 45218, 45221, 69303- 2, and 69820 Rev C6 of 6 Tyco Electronics Corporation ITEM PART NUMBER FOR DIE ASSEMBLY DESCRIPTION QTY PERITEM 45218 45221 69303- -2 69820 DESCRIPTION QTY PER ASSEMBLY 1 304993 305037 1- -305927- -8 2- -306131- -1 SCREW 1 2 304991 305036 2- -306131- -4 3- -306131- -7 SCREW 1 3 — — 1- -21046- -3 1- -21046- -3 RING, Retaining 2 4 304995 305042 306113- -2 2- -306113- -9 EJECTOR 1 5 304992 305035 306024- -8 — LOCATOR 1 6 45296 45315 306028- -7 306960 ANVIL (Stationary Die) 1 7 — — — 306958 ANVIL (Stationary Die, Insulation) 1 8 2- -305938- -0 45314 306029- -7 306961 INDENTER (Moving Die) 1 9 — — — 306959 INDENTER (Moving Die, Insulation) 1 10 304990 305041 — — FLARE PLATE, Upper 2 11 304989 305040 — — FLARE PLATE, Lower 1 12 — 305039 — — FLARE PLATE, Lower 1 13 303995 303995 9- -305832- -5 — SPACER, Upper 1 14 304994 304994 9- -305832- -6 2- -59676- -3 SPACER, Lower 1 15 — — — 306027- -6 SPACER, Insulation Adjustment 1 16 — — — 306027- -7 SPACER, Insulation Adjustment 1 17 21041- -6 21041- -6 — — PIN, Coiled Spring 2 18 — — — 23911- -7 WASHER, Spring 1 Figure 8 (End)