302R29N1R0CF4E

302R29N1R0CF4E JOHANSON | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

Features

• Lead Free Terminations 100% Sn, Final Termination • External Termination Layer: 100% Sn
• Electrodes: Pd/Ag • NP0 and X7R temperature coefficient
• Core Termination: PolyTerm® • Highly reliable performance
• Middle Barrier Layer: Ni • Industry standard case sizes How to order VOLTAGE 1st two digits are significant; third digit denotes number of zeros to follow eg: 302 = 3000 VDCW CASE SIZE R15 = 0805 R18 = 1206 S41 = 1210 S43 = 1812 S47 = 2220 S48 = 2225 S49 = 1825 DIELECTRIC N = NP0 W = x7R CAPACITANCE 1st two digits are significant; third digit denotes number of zeros to follow eg: 101 = 100 pF R denotes decimal eg: 1R0 = 1.0 pF TOLERANCE B = ± 0.1 pF C = ± 0.25 pF D = ± 0.5 pF J = ± 5% K = ± 10% M = ± 20% TERMINATION F = PolyTerm® MARKING 4 = Unmarked TAPE CODE E = 7” Plastic T = Paper 7” reel

302 R29 1R0 C F 4 EN

Safety Certified capacitor p/ns end with “-****-SC” and are rated at 250 Volts aC. Example Part Number: 302R29N1R0CF4E

15191 Bledsoe Street, Sylmar, California 91342 • (818) 364-9800• Fax (818) 364-6100

www.johansondielectrics.com SIZE 0805 1206 1210 1808 1812 2211 Voltage 500V 630V 1000V 500V 630V 1000V 2000V 3000V 500V 630V 1000V 2000V 3000V 500V 630V 1000V 2000V 3000V 4000V 5000V X2Y3 X1Y2 500V 630V 1000V 2000V 3000V 4000V 5000V 1.0 pF 10 pF 12 pF 15 pF 18 pF 22 pF • • • 27 pF 39 pF 47 pF 56 pF 68 pF 82 pF 100 pF • • 120 pF 150 pF • 180 pF 220 pF • 270 pF 330 pF 390 pF 470 pF 560 pF 680 pF • • • 820 pF 1.0 nF • 1.2 nF 1.5 nF 1.8 nF 2.2 nF • • • 2.7 nF 3.3 nF 3.9 nF 4.7 nF 5.6 nF 6.8 nF 8.2 nF 10 nF Note: Part values marked with “•” have better availability and shorter lead times. HigH Voltage Polyterm® aVailability - NP0 dielectric

www.johansondielectrics.com 1.0 pF 10 pF 15 pF 18 pF 22 pF 27 pF 33 pF 47 pF 56 pF 68 pF 82 pF 100 pF 150 pF 180 pF 220 pF 270 pF 330 pF 470 pF 560 pF 680 pF 820 pF 1.0 nF 1.2 nF 1.5 nF 1.8 nF 2.2 nF 2.7 nF 3.3 nF 4.7 nF 5.6 nF 6.8 nF 8.2 nF 10 nF 12 nF 15 nF 18 nF 22 nF 27 nF 33 nF 39 nF 47 nF Note: Part values marked with ‘•’ have better availability and shorter lead times. HigH Voltage Polyterm® aVailability - NP0 dielectric

www.johansondielectrics.com SIZE 0805 1206 1210 1808 1812 2211 Voltage 500V 630V 1000V 500V 630V 1000V 2000V 3000V 500V 630V 1000V 2000V 3000V 500V 630V 1000V 2000V 3000V 4000V 5000V X2Y3 X1Y2 500V 630V 1000V 2000V 3000V 4000V 5000V X2Y3 100 pF 150 pF • • • 180 pF 220 pF • • 270 pF 330 pF 470 pF • • • • 560 pF 680 pF • • 820 pF 1.2 nF 1.5 nF 1.8 nF 2.2 nF 2.7 nF 3.3 nF 3.9 nF 4.7 nF 5.6 nF 6.8 nF 8.2 nF 10 nF • • • 12 nF 15 nF 18 nF 22 nF 27 nF 33 nF 39 nF 47 nF 56 nF 68 nF 82 nF 100 nF 120 nF 150 nF 180 nF Note: Part values marked with “•” have better availability and shorter lead times. HigH Voltage Polyterm® aVailability - X7r dielectric

www.johansondielectrics.com 1.0 nF 1.2 nF 1.5 nF 1.8 nF 2.2 nF • 2.7 nF 3.3 nF 3.9 nF 4.7 nF 5.6 nF 6.8 nF 8.2 nF 10 nF 12 nF 15 nF 18 nF 22 nF • • 27 nF 33 nF 39 nF 47 nF 56 nF 68 nF 82 nF 100 nF 120 nF 150 nF 180 nF 220 nF 270 nF 330 nF 390 nF 470 nF 560 nF 680 nF Note: Part values marked with ‘•’ have better availability and shorter lead times. HigH Voltage Polyterm® aVailability - X7r dielectric

www.johansondielectrics.com beNd test descriPtioN The test board is designed so that the capacitance of the part can be measured while the part is being flexed (See figure 1). The capacitor is mounted at the center of the board. The testing equipment has a pressing block that is located so that it applies force at the center of the test board from below the part at a constant rate. Since the edges of the board are held in place by the support pins, this causes the board to flex. The amount of flex is measured in millimeters from the center of the board to the edge, please see “A” in Figure 2. + + “A” A R2.5 Probes Support Pins 45±2 45±2 Pressing Block R340 Units: mm As the test board is flexed, the capacitance is constantly being measured by a capacitance meter which is con- nected to the test boards through capacitance probes. The capacitance is first measured at 0mm flex to establish the nominal value. The test board is then flexed to 1mm and held for at least on second, then the capacitance is measured, it is then flexed to 2mm, and so on up to 5mm. Any change in capacitance that exceeds 5% of the nominal value is considered a failure. Figure 1 Figure 2 Bend Test Results 1808 size 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 3 mm 4 mm 5 mm 6 mm 8 mm 10 mm Board Flex (mm) PolyTerm Standa rd Produc t % of Parts that Fail

www.johansondielectrics.com eXamPle oF customer aPPlicatioN Johanson Dielectrics receives a lot of requests from our customers to help them with cracking issues. One cus- tomer had cracking at a rate of 16% on 1206 size high voltage capacitors during their process. The top picture of Figure 3 shows a clear mechanical crack with a 45 degree angle at the termination solder pad interface. Re- populating the same board with PolyTerm® capacitors showed no cracking failures. The bottom picture of Figure 3 shows how PolyTerm® Capacitors solved these problems. No cracking was exhibited on any of the PolyTerm® capacitors during the customer assembly process. Figure 3