XP95-B4 GAMEWELL-FCI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
- Compatible with all of the Gamewell-FCI 600 Series analog addressable detectors
- Base options include: –4 . 0 " (10.16 cm) or 6.0" (15.24 cm) ultra-low-profile bases feature "one-way" fit with low insertion force –6 . 0 " (15.24 cm) relay base (4 wire) – Audible alarm sounder bases controlled individually or by group
- Device address is stored in the sensor base
- Address is set by patented XPert addressing card
- Compatible with all Gamewell-FCI XP95 protocol detection devices CS-2048ph1.wmf Series 95 An ISO 9000-2000 Company SIGNALING S1195
12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118
CS-2048 Rev. a1 page 2 of 2 www.gamewell-fci.com Installation (Continued) sensor will fit in only one way, and a simple clockwise motion (without force) is required to plug-in the sensor. The mounting base will have provisions for the insertion of the XPert addressing card as a means for programming and maintaining the sensor’s address. The XP95-B4 base 4.0" (10.16 cm) will mount directly to a 3.5" (8.89 cm) octagonal box (Raco 110 or equal) or a 4" (10.16 cm) octagonal box (Raco 125 or equal) with a round cover/plaster ring (Raco 727 or equal). The other Series 95 bases 6.0" (15.24 cm) will mount directly to a 3.5" (8.89 cm) octagonal box (Raco 110 or equal); to a 4.0" (10.16 cm) octagonal box (Raco 125 or equal); or to a 4.0" (10.16 cm) square backbox (Raco 190 or equal). Engineer’s Specifications The contractor shall furnish and install, as indicated on the plans, either dual-chamber ionization (Gamewell-FCI model XP95-I) or photoelec tric (Gamewell-FCI model XP95-P) smoke sensors, analog addressable multisensor (XP95-M) or electronic thermal sensor (Gamewell-FCI model XP95-T) with one of the several addressable mount- ing base available options. The combination sensor head and twist-lock mounting base shall be UL Listed and UL Listed as compatible with the Gamewell-FCI 600 Series analog addressable fire alarm control panels. The base shall permit free interchange of sensor heads without requiring any additional wiring or additional programming of the head or base. Specifications 4” Base Model: XP95-B4 Alarm Current: N/A Standby Current: N/A Relay Rating: N/A Sounder Level: N/A Captive Terminals: Yes 6” Base Model: XP95-B6EZ Alarm Current: N/A Standby Current: N/A Relay Rating: N/A Sounder Level: N/A Captive Terminals: Yes Specifications (Continued) Relay Base Model: XP95-B6R4 Alarm Current: 0.0036 A Standby Current: 2 µA. Relay Rating: 0.04 A @ 125 VAC resistive loading. Sounder Level: N/A Captive Terminals: Yes Sounder Base Model: XP95-B65NDR Alarm Current: 0.030 A Standby Current: 2 µA. Relay Rating: N/A Sounder Level: 85 dB @ 10 ft.(3.048 m) Captive Terminals: Yes
Ordering Information
XP95-B4 4.0" (10.16 cm) mounting base with XPert addressing card XP95-B6R4 6.0" (15.24 cm) relay base (four- wire) with XPert addressing card XP95-B6EZ 6.0" (15.24 cm) ultra-low-profile EZ- fit mounting base with XPert addressing card XP95-B6SNDR 6.0" (15.24 cm) mounting base with XPert addressing card and audible alarm sounder in the base (MB-SDR-XP95)