3000-U141-02 AMKA | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
Electronic Locking & Monitoring 3000 - U 14 1 - 02 EMKA Beschlagteile GmbH & Co. KG Rev. 2019-04-19 / Roh Art.-Nr. 2655 Page 1 of 1 Control Unit Die Control Unit 3000-U141-02 ist die zentrale Steuereinheit für alle kabelgebundenen und kabellosen ELM Systeme. Sie verfügt über Schnittstellen zur Konfiguration und Kommunikation, einen Ereignisspeicher und 2 Alarmrelais. Pro System kann nur eine Control Unit eingesetzt werden. Zwei Abschluss-Widerstände für den CAN-Bus gehören zum Lieferumfang. Technische Änderungen vorbehalten. Control Unit The Control Unit 3000-U141-02 is the central control device for all wired and wireless ELM systems. It has interfaces for system configuration and communication, an event memory and 2 alarm relays. Only one Control Unit can be used in the same system. Two termination plugs for the CAN bus are included with the unit. Subject to technical changes. Power supply: 12 ... 24 V DC, 325 mA Relay data: max. 48 V AC, max. 0.5 A, max. 30 V DC, max. 1.0 A Data interfaces: RS 232 Sub-D9, USB (front; service) Ethernet 100 MBit, RJ45 (rear) LED CAN: flashing when active, otherwise ON Fig. 1: 3000-U140-02 front LED CYC: flashing when polling cycle is complete LED NWR/NWT: flashing when receiving / transmitting data via network, otherwise OFF Box dimensions: 135 x 33 x 126 mm (W x H x D) CAN bus wiring The Control Unit is linked to the other units " by RJ45 patch cable. In case power is supplied to the Control Unit, connect CAN- Out to CAN-In of the next unit. Open CAN-In / CAN-Out sockets must be equipped with a terminating plug for proper operation. 2 terminating plugs are supplied with this unit. Fig. 2: 3000-U141-02 rear Fig.3: top side label