300 VISHAY | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

www.vishay.com Vishay Dale Revision: 19-Apr-2022 1 Document Number: 36023 For technical questions, contact: connectors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Printed Circuit Dip Solder Connector

APPLICATIONS

Where permanent mounting of male connector to printed circuit board is required wi th mating female connector available. ELECTRICAL SPECIFICATIONS Current Rating: 7.5 A Breakdown Voltage: at sea level: 3600 VRMS at 70 000 feet: 975 VRMS

FEATURES

  • Right angle or straight through dip solder terminals
  • Threaded mounting studs
  • Male contacts molded in
  • Mating connector has solder cup or dip solder terminals
  • Female contacts float to aid in alignment and resist vibration
  • Permanent mounting provides greater reliability
  • Polarization provided by co ntact arrangement and guide pin location
  • Meets applicable paragraphs of MIL-C-55302 MATERIAL SPECIFICATIONS Contact Pin: phosphor bronze Contact Socket: phosphor bronze Contact Plating: gold plated Guide Pins: stainless steel, passivated Standard Body: glass-filled diallyl phthalate per MIL-M-14, type SDG-F green; other bo dy material supplied upon request PHYSICAL SPECIFICATIONS Number of Contacts: 7, 15, 19, and 25 Contact Spacing: 0.250", staggered rows provide a 0.125" grid Contact Gauge: #20 AWG Minimum Creepage Path between Contacts: 0.16" Minimum Air Spacebetween Contacts: 0.11" DIMENSIONS in inches (millimeters) B C A D E F H B C A D E F H J K L M N P R S B C A D E F H J K L M N P R S T U V W BB Z Y X W V U T S R P N M L K J H F E D A C B AA CC 3/16 [4.76] (0.750) ([19.0]) 0.36 [9.14]

7 CONTACTS

0.125 ± 0.003 [3.180 ± 0.076]

15 CONTACTS 19 CONTACTS 25 CONTACTS

[9.14] 0.36 (1.750) ([44.4]) 0.36 [9.14] [9.14] 0.36 (2.250) ([57.2]) (3.000) ([76.2]) 0.453 [11.5] 0.200 [5.08] [5.08] 0.200 0.010 0.181 [4.60] 0.242 [6.15] 0.06 [1.52] (TYP .) (TYP .) 0.06 [1.52] 0.242 [6.15] 0.181 [4.60] [3.180 ± 0.076] 0.125 ± 0.003 4-40 UNC 2A (TYP .) (TYP .) 4-40 UNC 2A 7/64 [2.78] 4-40 UNC 2A (TYP .) 0.125 ± 0.003 [3.180 ± 0.076] 0.181 [4.60] 0.242 [6.15] 0.06 [1.52] (TYP .) 7/64 [2.78] (TYP .) 0.06 [1.52] 0.242 [6.15] 0.181 [4.60] [3.180 ± 0.076] 0.125 ± 0.003 (TYP .) 4-40 UNC 2A 0.125 ± 0.003 [3.180 ± 0.076] (TYP .) 0.220 [5.59] 0.032 [0.813] (TYP .) 0.125 ± 0.002 [3.180 ± 0.051] 0.300 [7.62] 15/64 [5.95] Ø 0.040 [1.02] (TYP .) CONTACT PIN Ø 0.093 [2.36] (TYP .) GUIDE PIN TYPICAL SIDE VIEW 300PR

www.vishay.com Vishay Dale Revision: 19-Apr-2022 2 Document Number: 36023 For technical questions, contact: connectors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DIMENSIONS in inches (millimeters) A B C D E F H J K L M N P R S T U V W A B C D E F H J K L M N P R S T U V W X Y Z AA BB CCS R P N M L K J H F E D C B A H F E D C B A "A" (0.750) ([19.0]) 0.36 [9.14] 0.117 [2.97] 0.125 ± 0.003 [3.180 ± 0.076] [9.14] 0.36 (1.750) ([44.4]) [3.180 ± 0.076] 0.125 ± 0.003 [2.97] 0.117 0.36 [9.14] 0.117 [2.97] 0.125 ± 0.003 [3.180 ± 0.076] [9.14] 0.36 [3.180 ± 0.076] 0.125 ± 0.003 [2.97] 0.117 (2.250) ([57.2]) (3.000) ([76.2]) [2.38] 0.453 [11.5] 0.200 [5.08] [5.08] 0.200 0.125 ± 0.003 [3.180 ± 0.076] (TYP .) TYPICAL SIDE VIEW 0.010 GUIDE SOCKET 4-40 UNC 2A (TYP .) 3/16 [4.76] HEX NUT (TYP .) 0.06 [1.52] (TYP .) Ø 0.156 [3.96] (2 PLCS.) 0.125 [3.18] (TYP .) 0.125 [3.18] 0.375 [9.52] MIN. "C" PANEL CUTOUT 1/32 [0.794] R. (TYP .) (TYP .) 5/16 [7.94] Ø 0.046 [1.17] SOLDER CUP #20 AWG (TYP .) 300S A B C D E F H J K L M N P R S T U V W A B C D E F H J K L M N P R S T U V W X Y Z AA BB CCS R P N M L K J H F E D C B A H F E D C B A (0.750) ([19.0]) 0.36 [9.14] 0.117 [2.97] 0.125 ± 0.003 [3.180 ± 0.076] [9.14] 0.36 (1.750) ([44.4]) [3.180 ± 0.076] 0.125 ± 0.003 [2.97] 0.117 0.36 [9.14] 0.117 [2.97] 0.125 ± 0.003 [3.180 ± 0.076] [9.14] 0.36 [3.180 ± 0.076] 0.125 ± 0.003 [2.97] 0.117 (2.250) ([57.2]) (3.000) ([76.2]) [2.38] 0.453 [11.5] [5.56] [3.18] 0.200 [5.08] [5.08] 0.200 0.125 ± 0.003 [3.180 ± 0.076] (TYP .) TYPICAL SIDE VIEW 0.010 GUIDE SOCKET 4-40 UNC 2A (TYP .) 3/16 [4.76] HEX NUT (TYP .) 0.06 [1.52] (TYP .) Ø 0.032 [0.813] (TYP .) Ø 0.156 [3.96] (2 PLCS.) 0.125 [3.18] (TYP .) 0.125 [3.18] 0.375 [9.52] MIN. "C" PANEL CUTOUT 1/32 [0.794] R. (TYP .) (TYP .) 300SE

www.vishay.com Vishay Dale Revision: 19-Apr-2022 3 Document Number: 36023 For technical questions, contact: connectors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Note (1) 0.003" tolerance applies to contact to contact spacing, contact to mounting hole spacing has a tolerance of 0.035"

ORDERING INFORMATION

300 PR -7 W

MODEL CONTACTS NUMBER OF CONTACTS WITHOUT GUIDES S = Socket with solder cup PE = Pin with dip solder terminals SE = Socket with dip solder terminals PR = Pin with right angle dip solder terminals (optional on S, PE, and SE models only) DIMENSIONS in inches (millimeters) A B D C F E H E F C D B A S H J L K N M R P P R M N K L J H W A B D C F E S T U V V U T S E F C D B A W H J L K N M R P U V U V U V (0.750) ([19.05]) Ø 0.093 [Ø 2.36] (TYP .) 0.06 [1.52] (TYP .) 0.032 (TYP .) [Ø 0.813] 0.125 ± 0.003 [3.18 ± 0.08] (TYP .) 0.200 [5.08] (TYP .) [3.18] [4.76] [5.95] 0.453 [11.5] [5.56] Ø 0.040 [Ø 1.02] (TYP .) 3/16 HEX NUT [4.76] (TYP .) 4-40 UNC 2A (TYP .) 0.010 0.36 [9.14] 0.125 ± 0.003 (1) [3.18 ± 0.08] 0.117 [2.97] [2.97] 0.117 [3.18 ± 0.08] 0.125 ± 0.003 (1)

15 CONTACTS

[9.14] 0.36 ([44.45]) (1.750) (2.250) ([57.15]) 0.36 [9.14]

19 CONTACTS

0.125 ± 0.003 (1) [3.18 ± 0.08] 0.117 [2.97] [2.97] 0.117 [3.18 ± 0.08] 0.125 ± 0.003 (1)

25 CONTACTS

[9.14] 0.36 ([76.20]) (3.000) TYPICAL SIDE VIEW 300PE

www.vishay.com Vishay Revision: 01-Jan-2022 1 Document Number: 91000 Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA AR E SUBJECT TO CHANGE WITH OUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, incl uding warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of pro ducts for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in ge neric applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specificat ions may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party web site or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED