2W10MG MULTICOMP | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
Features
- Glass passivated
- High surge forward current capability
- Reliable low cost construction utilizing moulded plastic technique results in expensive product
- Lead tin plated copper
- Mounting position: Any
- Lead free
Applications
General purpose use in AC/DC bridge full wave rectification, for SMPS, lighting ballast, adapter, etc. Max. Ratings and Electrical Characteristics Rating at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristics Symbol Values Unit Max. Recurrent Peak Reverse Voltage Vrrm 1,000 VMax. RMS Bridge Input Voltage Vrms 700 Max. DC Blocking Voltage Vdc 1,000 Max. Average Forward Rectified Current at Ta = 25°C I(AV) 2 A Peak Forward Surge Current, 8.3ms Single Half Sine-wave Super Imposed on Rated Load (JEDEC Method) Ifsm 60 I2t Rating for Fusing (t < 8.3 ms) I2t 15 A2s Peak Forward Voltage per Diode at 2A DC Vf 1.1 V Maximum DC Reverse Current at Rated Tj = 25°C DC Blocking Voltage per Diode Tj = 100°C Ir 10 µA mA Typical Junction Capacitance (Note 1) Cj 30 pF Operating Junction Temperature Range Tj -55 to +150 °C Storage Temperature Range Tstg Note : 1. Measured at 1MHz and applied reverse Voltage of 4V DC Rating and Characteristics Curves
Page <2> V1.125/07/22 Bridge Rectifier Diode Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro Important Notice : This data sheet and its contents (the “Information”) belong to the members of the AVNET group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. Multicomp Pro is the registered trademark of Premier Farnell Limited 2019. Part Number Table Description Part Number Bridge Rectifier Diode, Single Phase, 1kV, 2A 2W10MG Diagram Dimensions : Inches (Millimetres) WOBM