2W005M YEASHIN | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

http://www.yeashin.com 1 REV.02 20120305 2W005M THRU 2W10M SINGLE PHASE 2.0 AMP BRIDGE RECTIFIERS VOLTAGE RANGE 50 to 1000 Volts CURRENT 2.0 Amperes

FEATURES

Ideal for printed circuit board Low forward voltage Low leakage current Polarity: marked on body Mounting position: Any Weight: 1.20 grams High temperature soldering : 260 O C / 10 seconds at terminals Pb free product at available : 99% Sn above meet RoHS environment substance directive request MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating 25 C ambient temperature uniess otherwies specified. Single phase half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. TYPE NUMBER 2W005M 2W01M 2W02M 2W04M 2W06M 2W08M 2W10M UNITS Maximum Recurrent Peak Reverse Voltage 50 100 200 400 600 800 1000 V Maximum RMS Voltage 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage 50 100 200 400 600 800 1000 V Maximum Average Forward Rectified Current .375"(9.5mm) Lead Length at Ta=50 C 2.0 A Peak Forward Surge Current, 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) 50 A Maximum Forward Voltage Drop per Bridge Element at 1.0A D.C. 1.0 V Maximum DC Reverse Current Ta=25 C at Rated DC Blocking Voltage Ta=100 C uA mA Operating Temperature Range, Tj -55— +1 50 ℃ Storage Temperature Range, TSTG -55— +150 ℃ WOM Unit:inch(mm) .220(5.6) .180(4.6) .220(5.6) .180(4.6) 1.0 (25.4) MIN. 1.1 (27.9) MIN. .366 (9.3) MAX. .220(5.6) .200(5.1) .032(0.8) .030(0.7)POS. LEAD

http://www.yeashin.com 2 REV.02 20120305 2W005M THRU 2W10M DEVICE CHARACTERISTICS FIG.4- TYPICAL REVERSE CHARACTERISTICS PER BRIDGE ELEMENT INSTANTANEOUS REVERSE CURRENT .( A ) 0 20 40 60 80 100 120 140 0.01 0.1 1.0 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) TJ=100 C TJ=25 C FIG.1- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PER BRIDGE ELEMENT PEAK FOR WARD SURGE CURRENT . (A) 1 10 100 NUMBER OF CYCLES AT 60Hz 8.3ms Single Half Sine Wave JEDEC Method FIG.3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PER BRIDGE ELEMENT INSTANTANEOUS FOR WARD CURRENT . (A) .01 0.1 1.0 INSTANTANEOUS FORWARD VOLTAGE. (V) Tj=25 C PULSE WIDTH-300 S 2% DUTY CYCLE FIG.2- MAXIMUM CURRENT DERATING CURVE OUTPUT RECTIFIED CURRENT AVERAGE FOR WARD CURRENT . (A) 20 40 60 80 100 120 140 1.5 1.0 2.0 AMBIENT TEMPERATURE. ( C) o RESISTIVE INDUCTIVE LOAD