2W005M TSC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
/cuspopen UL Recognized File # E-96005 /cuspopen Surge overload ratings to 50 amperes peak /cuspopen Ideal for printed circuit board /cuspopen Reliable low cost construction technique results in inexpensive product /cuspopen High temperature soldering guaranteed: 260℃ / 10 seconds / 0.375” ( 9.5mm ) lead length at 5 lbs., ( 2.3 kg ) tension Mechanical Data /cuspopen Case: Molded plastic /cuspopen Lead: Solder plated /cuspopen Polarity: As marked /cuspopen Weight: 1.10 grams WOB Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25℃ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Symbol 2W 005M 01M 02M 04M 06M 08M 10M Units Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Rectified Current @TA = 50℃ I(AV) 2.0 A Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) IFSM 50 A Maximum Instantaneous Forward Voltage @ 2.0A VF 1.1 V Maximum DC Reverse Current @ TA=25℃ at Rated DC Blocking Voltage @ TA=100℃ IR 10 500 uA uA Typical Thermal Resistance (Note) RθJA RθJL 15 ℃/W Operating Temperature Range TJ -55 to +125 ℃ Storage Temperature Range TSTG -55 to +150 ℃ Note: Thermal Resistance from Junction to Ambient and from Junction to Lead at
- 667 - RATINGS AND CHARACTERISTIC CURVES (2W005M THRU 2W10M) FIG.4- TYPICAL REVERSE CHARACTERISTICS PER BRIDGE ELEMENT INSTANTANEOUS REVERSE CURRENT .( A ) 0 20 40 60 80 100 120 140 0.01 0.1 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) TJ=100 C0 TJ=25 C0 FIG.1- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PER BRIDGE ELEMENT PEAK FOR WARD SURGE CURRENT . (A) 1 10 100 NUMBER OF CYCLES AT 60Hz 8.3ms Single Half Sine Wave JEDEC Method FIG.3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PER BRIDGE ELEMENT INSTANTANEOUS FOR WARD CURRENT . (A) 0.01 0.1 INSTANTANEOUS FORWARD VOLTAGE. (V) Tj=25 C PULSE WIDTH-300 S 2% DUTY CYCLE FIG.2- MAXIMUM CURRENT DERATING CURVE OUTPUT RECTIFIED CURRENT AVERAGE FOR WARD CURRENT . (A) 20 40 60 80 100 120 140 0.5 1.5 1.0 2.0 AMBIENT TEMPERATURE. ( C) o RESISTIVE INDUCTIVE LOAD