DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

MAXIMUM RA TINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. resistive or inductive load. 2RS101M THRU 2RS107M MAXIMUM RATINGS (@ TA=25 OC unless otherwise noted) ELECTRICAL CHARACTERISTICS (@TA=25 OC unless otherwise noted) Dimensions in inches and (millimeters)

FEATURES

  • Low leakage * Low forward voltage * Low cost * Mounting position: Any MECHANICAL DATA * Epoxy: Device has UL flammability classification 94V-O RS-1M RATINGS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at T A = 105 o C Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Thermal Resistance (Note 1) Typical Current Squarad Time SYMBOL VRRM VDC IFSM I2t TJ, T STG VRMS UNITS Volts Volts Amps2.0 14.9 Amps A2/Sec 0C/ W

0 COperating a nd Storage Temperature Ra nge

-55 to + 150 Volts 100 2RS101M 2RS103M 2RS105M2RS102M 2RS104M 200 800 2RS106M 100 200 80050 70 140 56035 1000 2RS107M 1000 700 400 400 280 600 600 420 2010-05 REV:B CHARACTERISTICS at Rated DC Blocking Voltage VF SYMBOL IR mAmps Maximum DC Reverse Current Maximum Instantaneous Forward Voltage at 2.0A DC Volts 5.0 @TA = 100 o C @TA = 25 o C 1.1 100 UNITS2RS101M 2RS103M 2RS105M2RS102M 2RS104M 2RS106M 2RS107M NOTES : 1. Thermal Resistance : Heat-sink case mounted or if PCB mounted. 2. "Fully ROHS compliant", "100% Sn plating (Pb-free)". .582 (14.8) .559 (14.2) .421 (10.7) .406 (10.3) .582 (14.8) .543 (13.8) .059 (1.5) .043 (1.1) .059 (1.5) .043 (1.1) .09 (2.3) .146 (3.7) .130 (3.3) .024 (0.6) .016 (0.4) .043 (0.9) .035 (0.6) .165 (4.2) .149 (3.8) .165 (4.2) .149 (3.8) .165 (4.2) .149 (3.8) 3. Available in Halogen-free epoxy by adding suffix -HF after the part nbr. SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 2.0 Amperes

INSTANTANEOUS FORWARD VOLTAGE, (V) PERCENT RATED PEAK REVERSE VOLTAGE, (%) INSTANTANEOUS FORWARD CURRENT, (A) AMBIENT TEMPERATURE, ( O 0.1 0.4 0.01 0.04 1.0 AVERAGE FORWARD CURRENT, (A)0 0.4 0.8 1.2 2.0 1.6 0 20 1.0 0.1 100 1000 12010040 60 80 140 RATING AND CHARACTERISTICS CURVES ( 2RS101M THRU 2RS107M ) FIG.3 TYPICAL REVERSE CHARACTERISTICS FIG.1 TYPICAL FORWARD CURRENT DERATING CURVE FIG.2 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT, (mA) NUMBER OF CYCLES AT 60Hz PEAK FORWARD SURGE CURRENT, (A) 100 120 52 10 20 50 100 FIG.4 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT Single Phase Half Wave

60 Hz Inductive or

TA = 100 O C TA = 25 O C 8.3mS Single Half Sine-Wave JEDEC Method T A = 25 O C Pulse Width = 300mS 1% Duty Cycle

2 R S 1 0 X M

Rectron Logo Part No. Year – code: (Y:Last digit of year& A:2010, B:2011……) Week – code: (WW:01~52) V oltage-code UL Logo

PACKAGING OF DIODE AND BRIDGE RECTIFIERS TUBE PACK PACKAGE EA PER BOX INNER BOX SIZE (mm) CARTON SIZE (mm) EA PER CARTON WEIGHT(Kg) RS-1M 1,350 540*118*118 560*259*144 2,700 12.03 PACKING CODE

Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liabi- lity for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" paramet- ers which may be included on RECTRON data sheets and/ or specifications ca- n and do vary in different applications and actual performance may vary over ti- me. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other rela- ted applications where a failure or malfunction of component or circuitry may di- rectly or indirectly cause injury or threaten a life without expressed written appr- oval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rect- ron Inc and its subsidiaries harmless against all claims, damages and expendit- ures. DISCLAIMER NOTICE