296XB252B2N CTS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Features

100 Megohms minimum @ 250 VDC

  • RoHS compliant 1 - 2 © 2009 CTS Corporation. All rights reserved. Information subject to change. CTS Electrocomponents www.ctscorp.com 2/06/09 Electrocomponents Data SheetData Sheet Rotary Potentiometer Dielectric Strength

500 VDC for 1 minute

Push-Pull strength on shaft 8 kg for 10 seconds Rotational life 10K cycles Operating temperature -10°C ~ 80°C Solder Heat Resistance 260°C for 5 seconds ±30%, ±20%, ±10%

A – ±10% B – ±20% C – ±30% TERMINAL STYLE X – PC U – PC FORMED TO REAR H – HOOK SHAFTS AVAILABLE LENGTH BEYOND COVER

Ordering Information

XM 296RE/ HM 296RE Molded Shaft, Shaft Parallel to P.C. Board UM 296RE Molded Shaft, Shaft Perpendicular to P.C. Board

296 X B 252 B 2 N

DIMENSION: TAPER 1 – LINEAR 2 – 10% AUD 3 – 10% CCW AUD DETENT N – NO DETENT C – CENTER DETENT RESISTANCE CODE EXAMPLES CODE RESISTANCE 501 500 OHMS 102 1K 252 2.5K 502 5K 103 10K 253 25K 503 50K 104 100K H Terminal StyleX Terminal Style D－ .540"(13.7mm) KNURLED .287"X 18T (7.3mmX18T) .071 .071 .394 .492 12.5 13.0 .598 15.2 .512 1.8 .075±.04 1.9±0.1 .118±.04 .161 4.1 3.0±0.1 .118±.04 4.1 .161 1.9±0.1 3.0±0.1 .075±.04 1.8 .040 ±.031 1.00 .248 ±0.86.3 .248 1.00 .040 6.3 4.0 .148±.002 3.75±0.05 .157 0.9±0.1 .035±.004 Ø1.30 Ø .051 -.000+.004 -0.00 +0.10 .148±.002 3.75±0.05 10.00 .646 16.4 6.4 .252 .118±.004 3.00±0.10 .083±.004 2.10±0.10 .283±.004 7.20±0.10 .063±.003 1.60±0.08 TYP.(2) .283±.004 7.20±0.10 2.54 10.00±0.1 .394±.004 .100 .016±.01 0.40±.0.03 8.7 .342 .063±.003 1.60±0.08 1.00 .040 6.4 .252 CENT..492 12.5 .148±.002 -.000 +.004 3.75±0.05 .148±.002 Ø1.30 -0.00 Ø.051 +0.10 3.75±0.05 10.00±0.10 .394±.004 .217±.002 .217±.002 5.50±0.05 .106 2.70 -0.00 +.006 -.000 +0.15 5.50±0.05 CENT. TRIM 2 - 2 © 2009 CTS Corporation. All rights reserved. Information subject to change. 2/06/09 CTS Electrocomponents www.ctscorp.com L ±.031 ±0.8L DIMENSION AND TOLERANCE UNLESS OTHERWISE SPECIFIED .X (1 PLACE) : .XX (2 PLACE) : ANGLE : ±5° TYP.(2) ±.031 ±0.8L TYP.(2) TYP.(3) TYP.(3) Ø 6.00±0.15 Ø.236±.006 ±.012 ±0.3 ±.005 ±0.13 Ø 6.00±0.15 Ø.236±.006 TYP.(3) inch mm