291V1022F832AB CTS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Features
Encoder: Special Consult CTS for custom features not listed Terminal Pull-out Strength 6 kg minimum for 10 seconds Solder Heat Resistance 350°C for 5 seconds Mechanical Vibration 15G, ( MIL-STD-883F-2004) Mechanical Shock 3.3 ± 0.125 VDC Output Code 2-Bit Quadrature Channel A leads channel B by 90° electrically during clockwise rotation of the shaft
3.3 VDC @ 24mA maximum
Operating: - 40°C to 85°C Storage: - 55°C to 100°C Rotational Life (@30 RPM)
3 Million cycles (No detent)
1 Million cycles (With detent)
6, 8 Pulses per Revolution Durable Metal Shaft & Bushing
- Optional momentary switch
- RoHS Compliant
- Multiple options for terminations, resolution,cables, voltage Rotational Torque Detent Options 0, 24, 32 Minimum Sink Current 2.0 mA for 5.0 VDC 1.0 mA for 3.3 VDC Running: 20 ± 10 gf-cm Power Consumption 150 mW maximum for 5.0 VDC 80 mW maximum for 3.3 VDC Detent: 140 ± 50 gf-cm (
24 Detents)
100 ± 50 gf-cm (32 Detents) 100G, ( MIL-STD-883F-2004)
CTS Electrocomponents www.ctscorp.com © 2011 CTS Corporation. All rights reserved. Information subject to change. TYPE 291V 2-Bit Encoder With Momentary Switch, Shaft Perpendicular to PC Board Electrical and Mechanical Specifications (continued) Switch Contact Resistance 10 Ω maximum Switch Rating
5 VDC @ 10 mA
Optional Momentary Switch: DIMENSION: inch mm .031 0.79 .250 6.35Ø .218± 5.53 3/8-32UNEF-2A THREAD .291 7.40 .047 1.19 .488 12.40 .281 7.13 R .250 6.35 .541 13.75 TYPE 291C 2-Bit Encoder With Momentary Switch, Cable, and Connector .246 6.25 23456 3/8 32 UNEF-2A THEAD Ø .488 12.40 .541 13.75 .047 7.13 .281 7.13 6.35 510 ± 110 grams Switch Life 0.5 ± 0.25 mm B L B L 6.35 CENT. PINS ARE
0.4 SQUARE
GENERAL TOLERANCE : R .002 0.05± ± .002 ±0.05 ±.015 ± 0.38 .250 6.35 ± .002 ±0.05 .250 6.35 ± .002 ±0.05 .250 6.35 ± .002 ±0.05.218±.002 5.53 0.05± .250 .291 7.40 .031 0.79 CABLE LENGTH See Termination Options .250 .050 1.27 .010 inch 0.25 mm GENERAL TOLERANCE : ± .010 inch 0.25 mm CONNECTOR IS AMP P/N 215083-6 OR EQUIVALENT 23456 1 .148 3.75 .024 0.60 .148 3.75 .024 0.60 CENT. .354 9.00 .423 10.75 ±.014 ± 0.35 ±.014 ± 0.35 ±.014 ± 0.35 CENT. .354 9.00 Standard: 1 Million actuations minimum Special: Consult CTS for custom life requirements.
Ordering Information
CTS Electrocomponents www.ctscorp.com © 2011 CTS Corporation. All rights reserved. Information subject to change. Shaft Trim DIMENSION: inch mm ELECTRIC CIRCUITRY AND WAVEFORM Standard Quadrature 2-Bit Code LOW LOW
8 PPR/ 32 DETENTS
PIN# * External pull-up resistors required for operation(2.2K ohm) Nominal Detent Position inch R - ROUND F - FLATTED SHAFT TRIM "L" SHAFT LENGTH mm inch A5 - 15mm B0 - 20mm B5 - 25mm C0 - 30mm 3/8-32 UNEF-2A 20 - .625" POSITION NUMBER 1. 8 PPR/32 detents is shown 2. Code repeats every 4 positions 3. Channel A Leads Channel B in CW direction and lags in CCW direction
1 PULSE
6.35mm Dia. .250" Dia. 24 - .750" 28 - .875" 32 - 1.000" 22 - .688" OUTPUT COMBINATION 832 - 8PPR, 32-DETENTS 624 - 6PPR, 24-DETENTS 832 800 - 8PPR, NO DETENTS 600 - 6PPR, NO DETENTS OPERATING VOLTAGE A - 5.0V A - 3.3V B SWITCH B - MOMENTARY B A - NONE TERMINATION ”z” ”Y” 0 - .312” 3 - .375” "B" BUSHING LENGTH V1 - .050” Pitch Center Pins Form to Rear with .144 length C4 - .050” Pitch Center 4” Ribbon Cable with Connector C5- .050” Pitch Center 5” Ribbon Cable with Connector C6- .050” Pitch Center 6” Ribbon Cable with Connector Connector is AMP P/N 215083-6 or Equivalent
291 V1 0 22 F
”x” R - ROUND X Imperial Shaft Metric Shaft .250” 6.35 F - FLATTED X Y Imperial Shaft Metric Shaft .250” 6.35 .218” 5.53 Z .250” 6.35 mm D - 9.53mm M9X.75P CHANNEL A CHANNEL B 2 - .250” ”x”