290-12.0M-SR-05GP OSCILENT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Series Number Package Description Last Modified 290 6 X 3.5 SMD Quartz Crystal Jun. 25 2003

FEATURES

  • Seam welded metal lid / ceramic package - 1.2mm max. low profile - Tight stability / High reliability - Wide frequency range - Tape and Reel OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS CHARACTERISTICS UNITS Frequency Range fO 10.00 ~ 40.00 MHz Frequency Tolerance @ 25ºC ±10 ~ ±50 PPM Frequency Stability Ta = -10 +70ºC ±10 ~ ±100 PPM Operating Temperature TOPR -10 ~ +60 (-40 ~ +85 optional)* ºC Storage Temperature TSTG -40 ~ +85 ºC Shunt Capacitance CO 7.0 max. pF Load Capacitance CL (Customer Specified) 16, 20, 30, Series pF Equivalent Series Resistance 10.00 ~ 40.00 MHz 50 max. Ohm Mode of Oscillation 10.00 ~ 40.00 MHz Fundamental - Drive Level 10.00 ~ 40.00 MHz 0.01 ~ 1000 µW * Consult Oscilent for available variations of temperature and stability PART NUMBER GUIDE Series Number Frequency Load Capacitance Tolerance @ +25oC Tolerance Over Temp ( oC ) Operating Temp ( oC ) Packaging** 290 - 12.0M - SR - 05 G R - TR Oscilent 6 x 3.5 SMD See table below for standard freq. and enter here Enter desired capacitance here. See table below Blank * = ±30 PPM or Fill in E.G Blank* = ±50 PPM G = ±30 PPM P = 0~+50 R = -10~+60 Blank* = Bulk TR = Tape/Reel Page 1 of 3Oscilent Corporation | 290

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator e.g. 12.0M for

12.000 MHz OR

frequency. for standard load capacitance e.g. - 20 for 20pF or Enter SR for Series. 05 = ±5 PPM 25 = ±25 PPM Avail. = ±5 ~ ±100 J= ±25 PPM H= ±20 PPM L = ±10 PPM N= ±100 PPM S = -20~+70 T = -30~+80 W = -40~+85 NOTE: Deviations on all parameters available. Please consult Oscilent for details. DEFINITIONS: Click on the characteristic names above for definitions of that particular characteristic. *STANDARDS: "Blank" part number selections indicate standard variables for that particular characteristic. **PACKAGING: Click on the packaging name above for tape/reel specifications STANDARD FREQUENCIES / LOAD CAPACITANCE - FOR GUIDE ONLY / OTHER FREQ/LOADS AVAILABLE FREQUENCY (MHz) LOAD (pF) Series 12 13 16 17 18 20 30 FREQUENCY (MHz) Series 12 13 16 17 18 20 30 LOAD (pF) F = Fundamental | OT = 3RD OT NOTE: Other frequencies and load capacitance available. Please consult Oscilent for part numbers. Series No.: 290 Page 2 of 3Oscilent Corporation | 290

Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map Page 3 of 3Oscilent Corporation | 290