DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
www.glenair.com E-Mail: sales@glenair .com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 C-2 Geo-Marine® Accessories D STAINLESS STEEL MOLDING ADAPTERS, STANDARD OR WITH OPTIONAL CABLE ENTRY DIAMETERS 290-011 and 290-012 Stainless Steel Molding Adapters Tips To select the appropriate molding adapter, consider the following basic suggestions to ensure a high integrity, quality molded termination:
- Select a molding adapter which will provide adequate inside working room to accept the termination envelope, especially if there are shield terminations, splices, etc.
- If the termination is to be molded with neoprene or other material using a transfer molding process, select the molding adapter cable entry diameter close to the outside diameter of the cable or termination envelope. Notes 1. Prior to use, lubricate O-rings with high grade silicone lubricant (Moly- kote M55 or equivalent). 2. Material: Adapter - stainless steel. O-ring - nitrile 290WS011 STANDARD DC A Thread B Tightening & Staking Indentations O-ring .60 (15.2) 1.28 (32.5) Max 290WS012 OPTIONAL CABLE ENTRY DIAMETERS .60 (15.2) E GF A Thread Tightening & Staking Indentations 2.00 (50.8) Max O-ring How To Order Sample Part Number 290WS011 –18 Basic Number 290WS011 Shell Size See Table I How To Order Sample Part Number 290WS012 –18 12 Basic Number 290WS012 Shell Size See Table II Cable Entry Size See Table II
www.glenair.com E-Mail: sales@glenair .com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 C-3 Geo-Marine® Accessories C Table V: Replacement O-Ring Part Numbers * Shell Size Piston O-Ring 10 2-014 12 2-016 14 2-018 16 2-020 18 2-022 20 2-024 22 2-026 24 2-028 * Parker o-ring part numbers. Compound N674-70 or equivalent. Table I: 290WS011 Fixed Entry Dimensions Shell Size A Thread Class 2B B Dia Max C Dia D Dia Table IV: Torque Values Entry No. Torque ± 5 In. Lbs. 10 80 12 100 14 120 16 120 18 140 20 140 22 140 24 150 Table II: 290WS012 Variable Entry Dimensions Shell Size A Thread Class 2B E Dia Max Max Entry F Dia G Dia 290-011 and 290-012 Stainless Steel Molding Adapters Instructions for using cable molding adapters 1. Slide 290WS011/012 adapter over cable 2. Prepare cable and wires 3. If using shrink sleeves, slide them over wire insulation and solder terminated wires to solder cup contacts; slide shrink sleeves to correct position and apply recommended heat. 4. Slide 290WS011/012 adapter and attach hand-tight to plug connector. 5. Use Plug Holding Tool (P/N 600-005) along with Hand Held Torque Wrench (P/N 600-076) and Spanner Wrench (P/N 600- 171) to tighten to recommended torque value. Please note that the “tightening/staking indentations” are on the 290WS011/012Adapter, NOT on the Marine Bronze Coupling Nut. The “holes” in the coupling nut retain the spring for the anti-decoupling feature of the cable plug. The TG70 Strap Wrench and the 600-076 Torque Wrench should be utilized to properly torque the cable/plug assembly to the appropriate receptacle