282T33L502A25A2

282T33L502A25A2 CTS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

Features

1 - 4 © 2010CTS Corporation. All rights reserved. Information subject to change. 05/17/10 CTS Electrocomponents www.ctscorp.com Data SheetData Sheet Precision Potentiometer® Electrocomponents

• Robust Construction
• 2 Million Cycle Life
• 2% Precision Linearity
• Water Resistant (IP54, IP67)
• Wide Temperature Range Electrical and Mechanical Specifications Resistance Range

1 K through 500 K ohms, linear

Consult CTS for audio taper Resistance Tolerance ± 10%, ± 20% Power Rating 0.5 watts @ 70°C Maximum Operating Voltage

500 VDC

250°, 300°, 360° Rotational Torque 20 – 180 gf-cm Stop Strength 9 kgf-cm minimum Mounting Information Bushing Mount Insulation Resistance

1000 Megohms minimum @ 500 VDC

750 VDC for 1 minute

Push-Pull Strength of Shaft 13.6 kg for 10 seconds Rotational Life

2 M cycles

Operating: -40°C to 125°C Storage: -55°C to 150°C Solder Heat Resistance 350°C for 5 seconds Linearity ± 2%

• Solder Lug, Faston, PC Terminal
• Continuous Rotation Available Ingress Protection Rating IP54, IP67 Vibration 15G, 10 to 2000 Hz
• RoHS Compliant (Refer to Resistance Tapers for detail)

282S Metal Shaft, Bushing Mount, Solder Lug (Faston) Terminal Formed to Rear 282U Metal Shaft, Bushing Mount, PC Terminal Formed to Front DIMENSION : mm STANDARD TOLERANCE : .X (1 PLACE) : ±0.3 .XX(2 PLACE): ±0.13 15.9 13.8 4.3 Ø2.8±0.2 “G” 1.0±0.1 1.6±0.2 See “Shaft Trim Options” “A“ 2.5±0.2 17.4 M9 X .75P or 3/8”-32 UNEF CTS 6.3 2.8 9.0 Ø1.7(3) DIMENSION : mm STANDARD TOLERANCE : .X (1 PLACE) : ±0.3 .XX(2 PLACE): ±0.13 15.9 13.8 4.3 Ø2.8±0.2 “G” 1.0±0.1 1.6±0.2 See “Shaft Trim Options” “L”±0.4T1 2.5±0.2 M9 X .75P or 3/8”-32 UNEF 16.5 C ±0.05 6.00 PCB LAYOUT OPPOSITE COMPONENT SIDE Ø1.2 +0.2 -0 (3) 16.50±0.05 ±0.05 6.00 C 17.4 CTS 21 3 “L”±0.4 “A“ 3.2 21 3 16.5 G CLEARANCE HOLE Ø3.0 +0.2 CLOCKWISE CIRCUIT CCW 1 CW WIPER2 0.8 Locating Lug “G” Thickness “T1” 8 mm 9.4 mm 9.8 mm 10 mm Thickness “T2” 4.1 mm 4.5 mm CLOCKWISE CIRCUIT CCW 1 CW WIPER2 Locating Lug “G” Thickness “T1” 8 mm 9.4 mm 9.8 mm 10 mm Thickness “T2” 4.1 mm 4.5 mm 05/17/102 - 4 CTS Electrocomponents © 2010 CTS Corporation. All rights reserved. Information subject to change. www.ctscorp.com

282T Metal Shaft, Bushing Mount, Solder Lug (Faston) Terminal 05/17/10 DIMENSION : mm STANDARD TOLERANCE : .X (1 PLACE) : ±0.3 .XX(2 PLACE): ±0.13 15.9 13.8 4.3 Ø2.8±0.2 “G” 1.0±0.1 1.6±0.2 See “Shaft Trim Options” “A“ “L”±0.4T1 6.4 2.5±0.2 17.4 M9 X .75P or 3/8”-32 UNEF 20.8 Ø1.7(3) 18.9 2.8 1 2 3 0.50±0.05 CTS 3 - 4 CTS Electrocomponents © 2010 CTS Corporation. All rights reserved. Information subject to change. www.ctscorp.com 9.0 CLOCKWISE CIRCUIT CCW 1 CW WIPER2 FLATTED ROUND KNURLED & SLOTTED SD SLOT Z Y X Shaft Trim Options Shaft Trim Diameter R .236” (6.00 mm) .250” (6.35 mm) O Shaft Trim Diameter F .236” (6.00 mm) .250” (6.35 mm) L X .375” (9.52 mm) .440” (11.18 mm) Y .156” (3.96 mm) .217” (5.50 mm) Shaft Trim Diameter S .236” (6.00 mm) .250” (6.35 mm) D X .063” (1.6mm) .063“ (1.6mm) Shaft Trim Diameter K .236” (6.00 mm) X .344” (8.74 mm) Y .063” (1.60 mm) Z

24 Teeth

X Y Y X Y .039” (1.0mm) .039“ (1.0mm) Locating Lug “G” Thickness “T1” 8 mm 9.4 mm 9.8 mm 10 mm Thickness “T2” 4.1 mm 4.5 mm

Ordering Information

Standard Part - 282T33L502A25A2, 282T33L502A25C2, 282TCBS103A25B1 282T33L502A26A2, 282T33L502A26C2, 282TCBS103A26B1 Please consult factory for other mounting options or custom features not listed. A - ± 10% B - ± 20% RESIST TOL Examples: RESISTANCE CODE EXAMPLES SHAFT LENGTH “L” R Round F K Knurled 24 Teeth S SD Slot .039”W X .063” D B TERMINAL STYLE T- Solder Lug(Faston) S- Solder Lug Formed to Rear U- PC Terminals Formed to Front SHAFT TRIM OPTIONSBUSHING MOUNT ”A” CODE RESISTANCE 102 1K 103 10K 503 50K 104 100K 504 500K Bushing Length LINEARITY 282 mm inch A - 5.0 mm 2 - .250” B - 7.5 mm 3 - .375” C - 10.0 mm 4 - .500” mm inch 1 - .625” 2 - .750” 3 - .875” 4 - 1.000” A - 10 mm B - 15 mm C - 20 mm D - 25 mm Note: Incremental length : 5mm or .125” Notes: Incremental Length : 2.5mm or .125” Bushing Dia. & Thread: M9 X .75P (metric) 3/8” - 32 UNEF (imperial) T A A R 103 A 2 5 2 - ± 2% - Flatted .375” X .156” IP Rating 5 - IP54 6 - IP67 ROTATION ANGLE Total Effective A - 250° 240° B - 300° 280° C - 360° 340 LOCATING LUG “G” 1 - Left, 10mm 2 - Left, 8mm Shaft Diameter 6mm (.236”) Shaft Diameter 6.35mm (.250”) O Round L D SD Slot .039” W X .063” D - Flatted .440” X .217” 5 - 1.125”E - 30 mm 4 -4 CTS Electrocomponents © 2010 CTS Corporation. All rights reserved. Information subject to change. www.ctscorp.com TOTAL ROTATIONAL ANGLE: 250° Resistance Tapers TOTAL ROTATIONAL ANGLE TOTAL ROTATIONAL ANGLE NCEATPERCENT RESIS ANCETISPERCENT RES RESISTANCEPERCENT TOTAL ROTATIONAL ANGLE TOTAL ROTATIONAL ANGLE: 360° TOTAL ROTATIONAL ANGLE: 300°