DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 15

Technical content

© 2016 TE Connectivity Family of Companies. All Rights Reserved. TE Connectivity, TE and TE connectivity (logo) are trademarks of the TE Connectivity family of companies. Other logos, products and/or company names may be trademarks of their respective owners.

TE Connectivity Technical Datasheet Sliver Cable Assemblies Page 2 of 15 1-1773903-6 Rev 11/16 © 2016 TE Connectivity Family of Companies. All Rights Reserved. TE Connectivity, TE and TE connectivity (logo) are trademarks of the TE Connectivity family of companies. Other logos, products and/or company names may be trademarks of their respective owners. INTRODUCTION

Description

TE Connectivity’s (TE) Sliver passive copper cable assembly is a robust and flexible cabling solution for internal interconnects. Due to the lower loss characteristics of copper cable, Sliver cabling reduces overall power requirements and extends the reach for high data rate signals inside networking equipment. TE's Sliver cable solution lowers overall costs by eliminating re-timers required to compensate for lossy PCB traces as well as more costly, lower loss PCB laminates. Sliver cable assemblies are offered in fine gage 33AWG low loss primary pairs and flat ribbon cable. The Sliver connector design is scalable in 4x increments and is available in straight and right angle plug configurations to mate with right angle and vertical board mount connectors. These connector styles offer a broad range of cable to board mating flexibility. Sliver cables are designed for applications in the data center, networking and telecommunications markets that use Ethernet, PCIe, InfiniBand, SAS and other signal protocols. Sliver cables and connectors are compatible with all types and speeds of microprocessors, and enable many interconnection configurations such as chip-to-chip, chip-to-front/rear panel, chip-to-backplane and a vertical card edge option. Features and Benefits

  • Compatible with many different industry standards and protocols
  • Supports speeds from 12G to 25Gbps per channel
  • Enables less expensive PCB material and electronics, with higher channel performance
  • Optimized construction to minimize insertion loss and cross talk
  • Supports all types and speeds of microprocessors
  • High density 0.6mm contact pitch
  • Connector designed to be scalable from 4x to 20x
  • Active press to release stainless steel latch
  • 33AWG low loss 25GHz primary pairs or 12GHz flat ribbon cable
  • RoHS compliant Product Applications
  • Switches, servers and routers
  • Data Center networks
  • Storage area networks
  • High performance computing
  • Telecommunication and wireless infrastructure Industry Standards
  • 10G / 25G Ethernet
  • PCIe Gen 3 / Gen 4
  • QPI - Intel QuickPath Interconnect
  • SAS 3.0 / 4.0
  • InfiniBand QDR / FDR / EDR
  • SATA Technical Documents Product Specification 108-32115 Sliver Cable Assembly

© 2016 TE Connectivity Family of Companies. All Rights Reserved. TE Connectivity, TE and TE connectivity (logo) are trademarks of the TE Connectivity family of companies. Other logos, products and/or company names may be trademarks of their respective owners. Table 1. Part Number Selection Guide Table 2. Material Specifications

© 2016 TE Connectivity Family of Companies. All Rights Reserved. TE Connectivity, TE and TE connectivity (logo) are trademarks of the TE Connectivity family of companies. Other logos, products and/or company names may be trademarks of their respective owners. Table 3. Electrical/Mechanical Specifications – Discrete Primary Pair Cable Assembly Table 4. Electrical/Mechanical Specifications – Laminated Ribbon Cable Assembly Table 5. Environmental Specifications

© 2016 TE Connectivity Family of Companies. All Rights Reserved. TE Connectivity, TE and TE connectivity (logo) are trademarks of the TE Connectivity family of companies. Other logos, products and/or company names may be trademarks of their respective owners. Table 6. Discrete Primary Pair Cable Specifications Table 7. Laminated Ribbon Cable Specifications

TE Connectivity Technical Datasheet Sliver Cable Assemblies Page 6 of 15 1-1773903-6 Rev 11/16 © 2016 TE Connectivity Family of Companies. All Rights Reserved. TE Connectivity, TE and TE connectivity (logo) are trademarks of the TE Connectivity family of companies. Other logos, products and/or company names may be trademarks of their respective owners. PIN CONFIGURATIONS Sliver 50 Position

TE Connectivity Technical Datasheet Sliver Cable Assemblies Page 7 of 15 1-1773903-6 Rev 11/16 © 2016 TE Connectivity Family of Companies. All Rights Reserved. TE Connectivity, TE and TE connectivity (logo) are trademarks of the TE Connectivity family of companies. Other logos, products and/or company names may be trademarks of their respective owners. Sliver 74 Position

TE Connectivity Technical Datasheet Sliver Cable Assemblies Page 8 of 15 1-1773903-6 Rev 11/16 © 2016 TE Connectivity Family of Companies. All Rights Reserved. TE Connectivity, TE and TE connectivity (logo) are trademarks of the TE Connectivity family of companies. Other logos, products and/or company names may be trademarks of their respective owners. SLIVER CABLE ASSEMBLY MECHANICAL SCHEMATICS Sliver 50 Position Straight Cable Assembly Sliver 74 Position Straight Cable Assembly

TE Connectivity Technical Datasheet Sliver Cable Assemblies Page 9 of 15 1-1773903-6 Rev 11/16 © 2016 TE Connectivity Family of Companies. All Rights Reserved. TE Connectivity, TE and TE connectivity (logo) are trademarks of the TE Connectivity family of companies. Other logos, products and/or company names may be trademarks of their respective owners. Sliver 50 Position Right Angle Cable Assembly Sliver 74 Position Right Angle Cable Assembly

TE Connectivity Technical Datasheet Sliver Cable Assemblies Page 10 of 15 1-1773903-6 Rev 11/16 © 2016 TE Connectivity Family of Companies. All Rights Reserved. TE Connectivity, TE and TE connectivity (logo) are trademarks of the TE Connectivity family of companies. Other logos, products and/or company names may be trademarks of their respective owners. SIGNAL INTEGRITY PERFORMANCE Insertion Loss (SDD21) of 1m 33AWG 100 Ohm 25G Sliver Mode Conversion (SCD21) of 1m 33AWG 100 Ohm 25G Sliver Return Loss (SDD11) of 1m 33AWG 100 Ohm 25G Sliver

TE Connectivity Technical Datasheet Sliver Cable Assemblies Page 11 of 15 1-1773903-6 Rev 11/16 © 2016 TE Connectivity Family of Companies. All Rights Reserved. TE Connectivity, TE and TE connectivity (logo) are trademarks of the TE Connectivity family of companies. Other logos, products and/or company names may be trademarks of their respective owners. Return Loss (SDD22) of 1m 33AWG 100 Ohm 25G Sliver Insertion Loss (SDD21) of 1m 33AWG 85 Ohm 25G Sliver Mode Conversion (SCD21) of 1m 33AWG 85 Ohm 25G Sliver

TE Connectivity Technical Datasheet Sliver Cable Assemblies Page 12 of 15 1-1773903-6 Rev 11/16 © 2016 TE Connectivity Family of Companies. All Rights Reserved. TE Connectivity, TE and TE connectivity (logo) are trademarks of the TE Connectivity family of companies. Other logos, products and/or company names may be trademarks of their respective owners. Return Loss (SDD11) of 1m 33AWG 85 Ohm 25G Sliver Return Loss (SDD22) of 1m 33AWG 85 Ohm 25G Sliver Insertion Loss (SDD21) of 1m 33AWG 100 Ohm 12G Sliver

TE Connectivity Technical Datasheet Sliver Cable Assemblies Page 13 of 15 1-1773903-6 Rev 11/16 © 2016 TE Connectivity Family of Companies. All Rights Reserved. TE Connectivity, TE and TE connectivity (logo) are trademarks of the TE Connectivity family of companies. Other logos, products and/or company names may be trademarks of their respective owners. Mode Conversion (SCD21) of 1m 33AWG 100 Ohm 12G Sliver Return Loss (SDD11) of 1m 33AWG 100 Ohm 12G Sliver Return Loss (SDD22) of 1m 33AWG 100 Ohm 12G Sliver

TE Connectivity Technical Datasheet Sliver Cable Assemblies Page 14 of 15 1-1773903-6 Rev 11/16 © 2016 TE Connectivity Family of Companies. All Rights Reserved. TE Connectivity, TE and TE connectivity (logo) are trademarks of the TE Connectivity family of companies. Other logos, products and/or company names may be trademarks of their respective owners. Insertion Loss (SDD21) of 1m 33AWG 85 Ohm 12G Sliver Mode Conversion (SCD21) of 1m 33AWG 85 Ohm 12G Sliver Return Loss (SDD11) of 1m 33AWG 85 Ohm 12G Sliver

TE Connectivity Technical Datasheet Sliver Cable Assemblies Page 15 of 15 1-1773903-6 Rev 11/16 © 2016 TE Connectivity Family of Companies. All Rights Reserved. TE Connectivity, TE and TE connectivity (logo) are trademarks of the TE Connectivity family of companies. Other logos, products and/or company names may be trademarks of their respective owners. Return Loss (SDD22) of 1m 33AWG 85 Ohm 12G Sliver While TE has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE EXPRESSLY DISCLAIMS ALL IMPLIED WARRANTIES REGARDING THE INFORMATION CONTAINED HEREIN, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. In no event will TE be liable for any direct, indirect, incidental, special or consequential damages arising from or related to recipient’s use of the information. It is the sole responsibility of recipient of this information to verify the results of this information using their engineering and product environment. Recipient assumes any and all risks associated with the use of the information.