2792844 CHEMTRONICS | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
Rev. B (8/18) Page 1 of 2 1-770-424-4888 www.chemtronics.com Part # Size Inches Color Size Metric 1 .030” White/Gray 0.8mm 2 .060” Yellow 1.5mm 3 .080” Green 2.0mm 4 .110” Blue 2.8mm Typical Product Data and Physical Properties Flux Type: High-Temperature No Clean Type ROL0 Specifications: ANSI/IPC J STD-004 MIL-F-14256 F No Clean Flux Spec: MIL-STD-883B Bellcore TR-NWT-000078 ANSI/IPC J SF818 Shelf Life: 2 years RoHS Compliant Yes Soder-WickÒ Lead-Free Desoldering Braid Product Description Soder-Wick Lead-Free is the state of the art in desoldering technology. It is specially designed for removal of today’s high temperature lead-free solders. The single layer weave used for Soder-Wick Lead-Free braid is lighter in mass than any other desoldering braid available and allows for lead-free solder removal at lower temperatures. Soder-Wick Lead-Free responds faster than any other conventional desoldering braid. This unique design minimizes overheating and requires less “contact” time thus preventing heat damage to the PCB and sensitive components. For Lead-Free rework, Soder-Wick has the answer. § Fastest wicking and heat transfer § High capacity for solder uptake § Halide free, no corrosive residues § Minimizes risk of heat damage to pads, components and PBCs § Can be used with Tin/Lead solders § RoHS compliant Typical Applications Soder-Wick Lead-Free desoldering braid safely removes solder from: § Thru-hole Components § SMT Pads and BGA Pads § Micro Circuits § Terminals, Lugs and Posts § Identification Script Static Dissipative Packaging Soder-Wick Lead-Free is packaged on Static Dissipative bobbins to minimize the risk of damage associated with static electricity. The static dissipative bobbins qualify as electrostatic discharge protective per MIL-STD-1686C and MIL-HDBK-263B and meet the static delay rate provision of MIL-B-81705C
1-770-424-4888 www.chemtronics.com Rev. B (8/18) Page 2 of 2 Part # Size Length Part# Size Length 40-1-5 1 5 40-2-5 2 5 40-2-10 2 10 40-3-5 3 5 40-3-10 3 10 40-4-5 4 5 40-4-10 4 10 VacuPakÔPackaging The VacuPakÔ Can contains ten five-foot bobbins in a vacuum sealed can. This package provides the highest level of cleanliness and freshness. Great for tool kit storage. Part # Size SW140255 2 SW14035 3 SW14045 4 8125 Cobb Center Drive, Kennesaw, GA 30152 1-770-424-4888 www.chemtronics.com Soder-WickÒ Lead-Free Desoldering Braid Usage Instructions For industrial use only. Read SDS carefully prior to use. 1) Choose a Soder-WickÒ Lead-Free braid width equal to or slightly larger than the pad or connection. 2) Choose a solder iron tip equal to or slightly larger than the pad or connection. 3) Set temperature of iron between 600-750°F. 4) Place wick on solder joint and place tip of hot iron on top of wick. 5) As solder becomes molten, the color of the wick will change from copper to silver. 6) Remove wick and iron from joint simultaneously once color change has stopped. 7) The component lead / pad is now clean and free from solder. 8) Clip and discard used portion of the wick 9) If needed, clean PCB with CircuitWorks Lead-Free Flux Remover Pen CW9400 and remove soils with a ControlWipes absorbent wipe. Soder-Wick Is Designed To Meet or Exceed the Following: § MIL-F-14256F, Type R § NASA-STD-8739.3 § DOD-STD-883E, Method 2022 § ANSI/IPC J STD-004, Type ROL0 § BELLCORE TR-NWT-000078 § ANSI/IPC J SF-818 Soder-Wick Bobbins Are Designed To Meet or Exceed: § MIL-STD-2000A § MIL-B-81705C § MIL-STD-1686C § MIL-HDBK-263B § ANSI/IPC J SF-818 Availability
40 Series Lead-Free No Clean Flux
Technical and Application Assistance Chemtronics provides a technical hotline to answer your technical and application related questions. The toll free number is: 1-800-TECH-401. Note: This information is believed to be accurate. It is intended for professional end users having the skills to evaluate and use the data properly. CHEMTRONICS does not guarantee the accuracy of the data and assumes no liability in connection with damages incurred while using it. Chemtronicsâ, Soder-Wickâ and CircuitWorksâ are registered trademarks of Chemtronics. All rights reserved. Vacu-Pakä and ControlWipesä are trademarks of Chemtronics. All rights reserved.