PYR5008 KEMET | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

PYR 5008 and 7511 resistors

  • for voltage balancing and/or discharge of electrolytic capacitors
  • fits capacitor diameters 50–90 mm
  • Easy to mount aPPlication basic dEsign Voltage balancing of series connected electrolytic can type capacitors and/or dis- charge purposes. The PYR resistors are wire wound on a ceramic core and coated with high tem- perature silicone. The mounting brackets standards CECC 40201, MIL -R26E resistance range 10–47 kW resistance tolerance +/– 5% rated voltage 700 VDC acc. to CECC 40201-003 temperature range –55 to +105°C are made of stainless steel and connected by two point spot welding. type a l d m b h s d w eight ±1 ±2 ±1 ±1 max approx (g) PYR 5008 22.0* 40 10.6 6.3 21 15 0.4 10 9 PYR 7511 32.0 50 10.6 6.3 21 15 0.4 10 11 * Brackets are adjustable up to A = 28.5 article code r (k W)* Pmax (w) Pmax (w) Pmax (w) fits cap. 40°c 85°c 105°c diameter PYR 5008 / 47 47 10 8 7 50–65 PYR 7511 / 10 10 13 11 10 75–90 PYR 7511 / 18 18 13 11 10 75–90 PYR 7511 / 27 27 13 11 10 75–90 PYR 7511 / 47 47 13 11 10 75–90 * Other R values on request sPEcification accEssoriEs accEssoriEs dimensions table Pyr (mm) article table Pyr

BHC and Evox Rifa Electrolytic Capacitors ØD Ød t mounting data for thE accEssoriEs accEssoriEs Pyc 7150, m5 Pyc 6756, m6* * M6 and M5 (max connector thickness 3 mm incl. washer) Pyb 7033, m8 Pyb 7026, m12 Pyb 7041, m12 Pyb 7042, m12 Pyc 6750, m5 Pyc 6751, m6* nylon caP nuts mounting max chassis width creepage t est voltage max tightening capacitor hole thickness of jaws distance 50–60 hz torque diameter mm (min) (mm) (mm) (mm) 1 min (kvac) (nm) (mm) Ø 17.5 5 17 4.5 2.5 3 Ø = 35 Ø 17.5 5 19 2.5 2,5 8 Ø > 35 Ø 22.5 5 19 5 2.5 8 Ø > 35 Ø 30.5 5 19 9 4 8 Ø > 35 scrEws washErs max stainlEss stEEl stainlEss stEEl m l d d t s tightening torque (nm) M5 10 8.7 5.1 1.2 10 3 M6 12 11.1 6.1 1.6 12 5 * ØD Ød t

PYC6041 35 64 19 52 4.5 11.5 vertical mounting TYPE CAN A B C F DIA TYPE CAN A B C D F DIA TYPE CAN A B C D E F G H DIA PYC6042 50 78 32.5 30 5.5 4.5 39 12 19 19 PYC6043 65 90.5 38 36 5.5 4.5 44 12 25 25 PYC6044 75 100.5 43 36 5.5 4.5 49 12 25 25 notes When using mounting clamps care should be taken not to obscure any safety vent in the can. Delivered without bolts and nuts for mounting. PYC clips are for PEH169 & PEH200 capacitors. dimEnsions mm matErial Zinc plated steel horizontal mounting TYPE CAN A B C F DIA G H

BHC and Evox Rifa Electrolytic Capacitors mounting kits accEssoriEs non-insulatEd vErsion m8 stud (m12 stud) insulatEd vErsion m8 stud (m12 stud) Dimensions mm. All the above accessories may be ordered individually using the part number shown, or as kits using the kit part numbers shown below. kit contents and ordering information STANDARD KITS Kit order number Part code Description 2740 2741 2782 2785

2352 Steel washer M8 - - • -

2353 Steel washer M12 - - - •

2772 Stepped poly washer M8 • - - -

2773 Stepped poly washer M12 - • - -

2778 Plain poly washer M8 • - - -

2779 Plain poly washer M12 - • - -

2788 Steel nut M12 - - - •

2789 Steel nut M8 - - • -

PYB7033 Nylon nut M8 • - - - PYB7026 Nylon nut M12 - • - - Kit description Insulated Insulated Non-insulated Non-insulated M8 M12 M8 M12 SPECIAL KITS Kit order number Part code Description 2690 2691 2692 2693 2695

2352 Steel washer M8 - - • - -

2353 Steel washer M12 • - - • -

2772 Stepped poly washer M8 - • • - -

2773 Stepped poly washer M12 • - - • •

2778 Plain poly washer M8 - • • - -

2779 Plain poly washer M12 - - - • •

2788 Steel nut M12 • - - • •

2789 Steel nut M8 - • • - -

PYB7041 Nylon nut M12 - - - - - PYB7042 Nylon nut M12 - - - - -