2719370000 WEIDMULLER | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Creation date September 14, 2021 3:57:58 AM CEST Catalogue status 10.09.2021 / We reserve the right to make technical changes. 1 BVDF 7.62HP/02/180SN BK BX Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany www.weidmueller.com Product image Bus connector with two connections per pole with the time-saving 6mm² PUSH IN connection system.

  • The extremely short cross-connection allows you to safely loop through bus currents.
  • PUSH IN connection: Solid wires and stranded wires with ferrules need only to be inserted and they are ready.
  • The self-locking middle flange reduces the space requirements by one pitch width in comparison with conventional solutions. General ordering data Version PCB plug-in connector, female plug, 7.62 mm, Number of poles: 2, 180°, PUSH IN with actuator, Tension-clamp connection, Clamping range, max. : 10 mm², Box Order No. 2719370000 Type BVDF 7.62HP/02/180SN BK BX GTIN (EAN) 4050118780932 Qty. 57 pc(s). Product data IEC: 600 V / 46 A / 0.5 - 10 mm² UL: 600 V / 35 A / AWG 24 - AWG 8 Packaging Box

BVDF 7.62HP/02/180SN BK BX Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany www.weidmueller.com Technical data Creation date September 14, 2021 3:57:58 AM CEST Catalogue status 10.09.2021 / We reserve the right to make technical changes. 2 Dimensions and weights Depth 42.55 mm Depth (inches) 1.675 inch Height 35.05 mm Height (inches) 1.38 inch Width 18.78 mm Width (inches) 0.739 inch Net weight 20.14 g System Parameters Product family OMNIMATE Power - series BV/SV 7.62HP Type of connection Field connection Wire connection method PUSH IN with actuator, Tension-clamp connection Pitch in mm (P) 7.62 mm Pitch in inches (P) 0.3 inch Conductor outlet direction 180° Number of poles 2 L1 in mm 7.62 mm L1 in inches 0.3 inch Number of rows 2 Pin series quantity 1 Touch-safe protection acc. to DIN VDE 57 106 Safe from finger touch Touch-safe protection acc. to DIN VDE 0470 IP 20 Volume resistance 4.50 mΩ Can be coded Yes Stripping length 12 mm Stripping length tolerance min. -1 mm max. 1 mm Screwdriver blade 0.6 x 3.5 Plugging force/pole, max. 12 N Pulling force/pole, max. 12 N Material data Insulating material PA GF Colour black Colour chart (similar) RAL 9011 Insulating material group I Comparative Tracking Index (CTI) ≥ 600 UL 94 flammability rating V-0 Contact material Copper alloy Contact surface tinned Storage temperature, max. 70 °C Operating temperature, min. -50 °C Operating temperature, max. 120 °C Conductors suitable for connection Clamping range, min. 0.5 mm² Clamping range, max. 10 mm² Wire connection cross section AWG, min. AWG 24 Wire connection cross section AWG, max. AWG 8 Solid, min. H05(07) V-U 0.5 mm² Solid, max. H05(07) V-U 10 mm² Stranded, min. H07V-R 1.5 mm² Stranded, max. H07V-R 6 mm² Flexible, min. H05(07) V-K 0.5 mm² Flexible, max. H05(07) V-K 10 mm²

BVDF 7.62HP/02/180SN BK BX Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany www.weidmueller.com Technical data Creation date September 14, 2021 3:57:58 AM CEST Catalogue status 10.09.2021 / We reserve the right to make technical changes. 3 w. plastic collar ferrule, DIN 46228 pt 4, min. 0.5 mm² w. wire end ferrule, DIN 46228 pt 1, min. 0.5 mm² w. wire end ferrule, DIN 46228 pt 1, max. 6 mm² Clampable conductor Cross-section for conductor connection nominal 0.5 mm² wire end ferrule Stripping length nominal 14 mm Recommended wire- end ferrule H0,5/12 OR Cross-section for conductor connection nominal 0.75 mm² wire end ferrule Stripping length nominal 14 mm Recommended wire- end ferrule H0,75/18 W Cross-section for conductor connection nominal 1 mm² wire end ferrule Stripping length nominal 15 mm Recommended wire- end ferrule H1,0/18 GE Cross-section for conductor connection nominal 1.5 mm² wire end ferrule Stripping length nominal 12 mm Recommended wire- end ferrule H1,5/12 Stripping length nominal 15 mm Recommended wire- end ferrule H1,5/18D SW Cross-section for conductor connection nominal 2.5 mm² wire end ferrule Stripping length nominal 12 mm Recommended wire- end ferrule H2,5/12 Stripping length nominal 14 mm Recommended wire- end ferrule H2,5/19D BL Cross-section for conductor connection nominal 4 mm² wire end ferrule Stripping length nominal 12 mm Recommended wire- end ferrule H4,0/12 Stripping length nominal 14 mm Recommended wire- end ferrule H4,0/20D GR Cross-section for conductor connection nominal 6 mm² wire end ferrule Stripping length nominal 12 mm Recommended wire- end ferrule H6,0/12 Stripping length nominal 14 mm Recommended wire- end ferrule H6,0/20 SW Cross-section for conductor connection nominal 10 mm² Reference text The outside diameter of the plastic collar should not be larger than the pitch (P), Length of ferrules is to be chosen depending on the product and the rated voltage.

BVDF 7.62HP/02/180SN BK BX Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany www.weidmueller.com Technical data Creation date September 14, 2021 3:57:58 AM CEST Catalogue status 10.09.2021 / We reserve the right to make technical changes. 4 Rated data acc. to IEC tested acc. to standard IEC 60664-1, IEC 61984 Rated current, min. number of poles (Tu=20°C) 46 A Rated current, max. number of poles (Tu=20°C) 42 A Rated current, min. number of poles (Tu=40°C) 41 A Rated current, max. number of poles (Tu=40°C) 37.5 A Rated voltage for surge voltage class / pollution degree II/2 600 V Rated voltage for surge voltage class / pollution degree III/2 600 V Rated voltage for surge voltage class / pollution degree III/3 600 V Rated impulse voltage for surge voltage class/ pollution degree II/2 4 kV Rated impulse voltage for surge voltage class/ pollution degree III/2 6 kV Rated impulse voltage for surge voltage class/ contamination degree III/3 6 kV Short-time withstand current resistance 3 x 1s with 400 A Clearance, min. 10.36 mm Creepage distance, min. 11.03 mm Rated data acc. to UL 1059 Institute (cURus) Certificate No. (cURus) E60693 Rated voltage (Use group B / UL 1059) 600 V Rated voltage (Use group C / UL 1059) 600 V Rated voltage (Use group D / UL 1059) 600 V Rated current (Use group B / UL 1059) 35 A Rated current (Use group C / UL 1059) 35 A Rated current (Use group D / UL 1059) 35 A Wire cross-section, AWG, min. AWG 24 Wire cross-section, AWG, max. AWG 8 Reference to approval values Specifications are maximum values, details - see approval certificate. Packing Packaging Box VPE length 355 mm VPE width 135 mm VPE height 60 mm Classifications ETIM 6.0 EC002638 ETIM 7.0 EC002638 ETIM 8.0 EC002638 ECLASS 9.0 27-44-03-09 ECLASS 9.1 27-44-03-09 ECLASS 10.0 27-44-03-09 ECLASS 11.0 27-46-02-02

BVDF 7.62HP/02/180SN BK BX Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany www.weidmueller.com Technical data Creation date September 14, 2021 3:57:58 AM CEST Catalogue status 10.09.2021 / We reserve the right to make technical changes. 5 Important note IPC conformity Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. Notes • Additional colours on request

  • Wire end ferrule with plastic collar to DIN 46228/4
  • Wire end ferrule without plastic collar to DIN 46228/1
  • P on drawing = pitch
  • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.
  • Long term storage of the product with average temperature of 50 °C and average humidity 70%, 36 months Approvals Approvals UL File Number Search E60693 Downloads Catalogues Catalogues in PDF-format

BVDF 7.62HP/02/180SN BK BX Weidmüller Interface GmbH & Co. KG Klingenbergstraße 26 D-32758 Detmold Germany www.weidmueller.com Drawings Creation date September 14, 2021 3:57:58 AM CEST Catalogue status 10.09.2021 / We reserve the right to make technical changes. 6 Product image Dimensional drawing Similar to illustration Derating curve