CM106 CAMPBELL | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 2

Technical content

Features

Individually adjustable legs; each leg has a spring • loaded pin that engages into holes on the under- side of the leg along with knob to clamp. Campbell Scientifi c enclosures can be mounted to • the mast or leg section (enclosure must be ordered with the appropriate mounting brackets). CM106K Tripod Kit Th e CM106K Tripod Kit is intended for overseas cus- tomers. It contains hardware for constructing a tripod. Th e galvanized steel pipes used for the mast, legs, and leg braces are purchased locally, which greatly reduces overseas shipping costs. Specifi cally, the customer will need to purchase the following: (1) 1 1/2 NPS SCH40 [DN 40 mm] steel pipe• with 100.0-in. [254 cm] length (3) 3/4 NPS SCH40 [DN 20 mm] steel • pipes with 72.0-in. [182.9 cm] length (3) 3/4 NPS SCH40 [DN 20 mm] steel • pipes with 48.0-in. [121.9 cm] length A CM106 with the optional guy kit and an enclosure mounted to the leg base.

Campbell Scientific, Inc. | 815 W 1800 N | Logan, Utah 84321-1784 | (435) 753-2342 | www.campbellsci.com USA | AUSTRALIA | BRAZIL | CANADA | COSTA RICA | ENGLAND | FRANCE | GERMANY | SOUTH AFRICA | SPAIN Copyright © 2011 Campbell Scientifi c, Inc. Printed July 2011

Ordering Information

CM106 7 ft (2.1 m) or 10 ft (3 m) galvanized-steel tripod with grounding kit CM106K CM106 Tripod Kit. Common Accessory

27117 Optional tripod guy kit for the CM106

Upper Mast Retracted: 7 ft (2.1 m) Upper Mast Extended: 10 ft (3 m) Vertical Load Limit: 100 lb (45 kg) Mast Outer Diameter Main Lower Mast: 1.90 in. (48 mm) Retractable Upper: 1.74 in. (44 mm) Base Diameter: 9.3 ft (2.8 m) Leveling Adjustment: Slide collars on each leg adjust individually Leg Base: 4 in. by 5 in. with four 0.62 in. holes for ground stake Portability: Collapsible to 8 in. diameter by 6 ft length Weight with Mast: 40 lb (18 kg) Maximum Slope Angle*: 22 ° or 40% grade Allowable Wind Speeds** Tripod Confi guration Sustained Wind Wind Gust Mast Extended, Unguyed 65 mph (29 m/s) 84 mph (38 m/s) Mast Retracted, Unguyed 80 mph (36 m/s) 104 mph (46 m/s) Mast Extended, Guyed 100 mph (45 m/s) 130 mph (58 m/s) Mast Retracted, Guyed 115 mph (51 m/s) 150 mph (67 m/s) An enclosure mounted to the mast of the CM106. Back of an enclosure mounted to the leg base of the CM106. A close up of the adjustable leg clamp. *Maximum slope angle specifi cation assumes that the leg clamp pins are engaged in the holes under the legs, and that one leg points down- hill while the other two legs point uphill. **Allowable wind speed values assume:

  • 14 x 16 in. enclosure at mast base
  • 10.5 x 16.5 in. solar panel at mast base
  • Crossarm and sensors (1.4 ft 2 projected area) at mast top
  • Adequate ground anchors (stakes can pull out at lower wind speeds)